Abstract:The main requirements of cemented carbides as cutting, machining, and drilling tools are wear resistance, chemical stability at high temperatures, and proper mechanical properties. However, some studies have indicated that the surface temperature of these tools increases locally during the cutting or machining process, which leads to oxidation, compositional change, and tool degradation over time. In addition, these tools are sometimes used in corrosive media such as saline water, etc. Cemented carbides contain carbide and metallic phases; therefore, there is a possibility of severe galvanic corrosion in these composites, which leads to the preferential dissolution of the metallic phase and the remaining carbide skeleton. On the other hand, the corrosion rate of hardmetals depends on the pH of the electrolyte. In alkaline electrolytes, Co passivation occurs; in contrast, WC actively dissolves. This behavior is vice versa in acidic electrolytes. Deposition of hard protective CVD coatings is an appropriate way to protect cemented carbides from environmental damage and oxidative wear. In past studies, it has been mentioned that using single-component coatings such as TiN is unsuitable for improving the cutting performance of such tools due to oxidative degradation of the coating. But the use of modified multilayer coatings has shown a significant improvement in the proficiency and lifespan of these cutting tools. In recent years, CVD TiAlN coatings have replaced the previous generation of hard coatings due to their unique properties. Much research has been carried out on the properties of these coatings, and the effect of different contents of Al and dopants have been reported. Recently, CVD TiSiCN coatings have been introduced as a new generation of hard coating that has attracted the attention of researchers. These composite coatings are one of the promising options for the next generation of wear-resistant coatings due to their ultra-high hardness, wear and oxidation resistance, and excellent performance in the cutting/machining process.

Wear and Oxidation Behaviour of Tungsten Carbide Based Coatings: A Review

A review on the steels, alloys/high entropy alloys, composites and coatings used in high temperature wear applications

State-of-the-Art Developments in Advanced Hard Ceramic Coatings Using PVD Techniques for High-Temperature Tribological Applications

Review of inorganic coatings and coating processes for reducing wear and corrosion

Oxidation corrosion wear and lubricating mechanisms of WC particles reinforced FeCoCrNiMn high - entropy alloys coatings

Review on Electrodeposited Ni–W Based Composite Coatings in High-Temperature Applications Concerning Oxidation Behavior

Experimental Investigations on Erosion-Corrosion Characteristics of HVOF-Sprayed WC-10% Ni Coatings Deposited on Aluminum Alloy

Optimizing Wear Resistance and Tensile Strength of Nickel-Based Coatings through Tungsten Carbide Reinforcement

Review of CVD TiN coatings for wear-resistant applications: deposition processes, properties and performance

Wear Behaviour of Hard Chrome and Tungsten Carbide-HVOF Coatings

Tribological Behavior of High Entropy Alloy Coatings: A Review

Failure Behavior of Cemented Tungsten Carbide Materials: A Case Study of Mining Drill Bits

Understanding the role of surface roughness on the tribological performance and corrosion resistance of WC-Co coating

Tribological Performance of High-Entropy Coatings (HECs): A Review

CAVITATION EROSION BEHAVIOR OF WC–Co COATINGS ON TURBINE STEEL DEPOSITED BY COLD SPRAY

Tribological and Mechanical Performance of Coatings on Piston to Avoid Failure—A Review

High temperature tribological behavior of atmospheric plasma-sprayed CoCrFeNiW0.3 + 5 at% C high-entropy alloy coating

Recent developments in the new generation of hard coatings applied on cemented carbide cutting tools

Corrosion and erosion performance of HVOF/TiAlN PVD coatings and candidate materials for high pressure gate valve application

The Dry Sliding Wear Behavior of HVOF-Sprayed WC: Metal Composite Coatings

Hard corrosion-resistant coatings for constructional applications