Abstract:The primary cause behind the degradation of reinforced concrete (RC) structures is the propagation of corrosion in the steel-RC structures. Nowadays, numerous retrofitting techniques are available in the construction sector. Fiber-reinforced polymer (FRP) is one of the efficient rehabilitation measures that can be implemented on corroded structures to enhance structural capacities. However, the estimation of axial strength of FRP-strengthened columns affected by corrosion has been a challenging and tedious task in the laboratory as well as on the site. Considering such shortcomings, the prediction of axial capacity can be done using various analytical methods and artificial intelligence (AI) techniques. In this study, a comprehensive dataset of circular columns was extracted from the literature to predict the axial strength of FRP-wrapped and unstrengthened RC corroded columns. The laboratory results from the assembled dataset were compared to corresponding values estimated using relevant design codes provided by American Concrete Institute (ACI 440.2R-17 and ACI 318-19), and Bureau of Indian Standard (IS 456:2000). Five machine learning models were employed on columns to predict the axial load carrying capacity of FRP-strengthened and un-strengthened RC corroded columns. The results discovered that the extreme gradient boosting (XGBoost) model achieves superior accuracy with the least errors and could be used by the scientific community and FRP applicators to forecast the axial performance of corroded columns strengthened with and without FRP. The findings from the design codes revealed that prediction errors were available in high margins. Furthermore, feature importance analysis was conducted using the Shapley Additive exPlanation algorithm to know the contribution and influence of each input parameter on axial capacity. The feature analysis found that unconfined compressive strength of concrete plays an important role in deciding the axial capacity of columns. Moreover, to enhance the precision of axial capacity computation and improving the overall efficacy in engineering practice, a web-based user-friendly interface was developed for FRP applicators and engineers to simplify the process.

Deformation capacity of FRP retrofitted reinforced concrete columns with corroded reinforcing bars

Residual Performance of Frp-Retrofitted Rc Columns after Being Subjected to Cyclic Loading Damage

Vehicle Collision with Reinforced Concrete Columns Wrapped with Fiber-Reinforced Polymer Composites

Time-Dependent Behavior of FRP Retrofitted RC Columns after Subjecting to Simulated Earthquake Loading

RESIDUAL PERFORMANCE BASED OF AS-BUILD AND RETROFITTED RC COLUMNS

Experimental Studies Long-term Behavior of FRP Retrofitted RC Columns with Earthquake Loading Damage

Experimental Study on Seismic Retrofit and Repair of Circular Reinforcement Concrete Short Columns by Fiber Reinforced Plastic

Analysis and Behaviour of FRP-confined Short Concrete Columns Subjected to Eccentric Loading

Hysteretic behavior of GFRP retrofitted RC bridge short columns

Research on CFRP confined circular concrete-filled steel tubular columns subjected to cyclic lateral forces

Experimental Investigation on Performance of Cantilever CFRP-wrapped Circular RC Columns under Lateral Low-Velocity Impact

Seismic performance of large rupture strain FRP retrofitted RC columns with corroded steel reinforcement

Hysteretic model for corroded reinforced concrete columns retrofitted with FRP

Axial compressive behavior and model analysis of BFRP-jacketed corroded and pre-damaged circular reinforced concrete columns

Mechanical Degradation of Reinforced Concrete Columns Corroded Under Sustained Loads

Compressive behavior degradation of FRP-confined RC columns exposed to a chlorine environment

Prediction for lateral deformation capacity of corroded reinforced concrete columns

Experimental Investigation on Shear Strengthening of Corroded Reinforced Concrete Columns by Pet Fibers with Large Fracturing Strain

CFRP Strengthened RC Beams with Pre-Strengthening Non-Uniform Reinforcement Corrosion Subjected to Post-Strengthening Wetting/drying Cycles

Predicting deflection of retrofitted reinforced concrete beams

Prediction of axial capacity of corrosion-affected RC columns strengthened with inclusive FRP