Abstract:The accurate simulation of moisture transport in cement-based materials is an important step to predict many durability processes of concrete structures. This paper studied the effects of boundary conditions on modeling moisture transport, in particular for simulating drying kinetics and the inverse determination of liquid water permeability. Three boundary conditions were investigated, namely, the Dirichlet (imposed) condition, the flux boundary condition, and the boundary supplied by moisture movement in the ambient environment (coupling with a convection-diffusion moisture transport model). By comparing with the measured drying mass loss curves (without airflow) for ordinary Portland cement pastes, we found that the Dirichlet boundary condition provides slightly better simulated drying kinetics than the flux boundary condition, while results of the coupling model are less promising. As for inversely determined liquid permeability, the studied boundary conditions lead to the max. 36% difference. If considering the airflow in the environment, both the flux boundary condition and the coupling model with computational fluid dynamics (CFD) show that the airflow does not have an effect on moisture evaporation for the studied cement-based materials, because of their low permeability, resulting in a very short initial stage of drying. Moisture evaporation for these materials is mainly controlled by the internal moisture transport. However, for materials with high permeability, the drying kinetics increase with the airflow velocity because the initial stage of drying becomes much longer than the low permeable materials. The implication is that some laboratory methods for drying cement-based materials (specimens stored in a sealed chamber without airflow) may need to be reevaluated because the relative humidity at the material surface is different from the controlled relative humidity.

A fractional kinetic model for drying of cement-based porous materials

A two-parameter stretched exponential function for dynamic water vapor sorption of cement-based porous materials

Is Early Drying Shrinkage Still Determined by the Mesopore Content? A Case Study of Cement Paste with Minerals

Modeling Anomalous Moisture Transport in Cement-Based Materials with Kinetic Permeability

Effects of model boundary conditions on simulated drying kinetics and inversely determined liquid water permeability for cement-based materials

Quantifying Isothermal Drying of Cement Mortars in View of Water Sensitivity

A New Hydration Kinetics Model of Composite Cementitious Materials, Part 1: Hydration Kinetic Model of Portland Cement

Oven dying kinetics and status of cement-based porous materials for in-lab microstructure investigation

Micro Expressions of Cement Hydration Kinetics

KINETICS MODEL FOR THE HYDRATION MECHANISM OF CEMENTITIOUS MATERIALS

Modeling Hydroionic Transport in Cement-Based Porous Materials under Drying-Wetting Actions

Unified Determination of Relative Molecular Diffusivity and Fluid Permeability for Partially Saturated Cement-Based Materials

Prediction of Effective Chloride Diffusivity of Cement Paste and Mortar from Microstructural Features

Mathematical modeling of cement hydration process and microstructure development

FRACTAL ANALYSIS OF STRESS-DEPENDENT DIFFUSIVITY OF POROUS CEMENTITIOUS MATERIALS

Drying Kinetic Analysis of Municipal Solid Waste Using Modified Page Model and Pattern Search Method

A New Hydration Kinetics Model of Composite Cementitious Materials, Part 2: Physical Effect of SCMs

Modeling and simulation of drying kinetics/curves: application to building materials

Kinetic Model for Drying in Frame of Generalized Fractional Derivatives

Moisture transport processes under drying-wetting actions: From experimental evidence to modelling

Modeling of multilayer water adsorption and condensation in slits of cement minerals by molecule simulation and adsorption isotherm