Abstract:In recent years, alkali-activated mortar (AAM) has emerged as a promising alternative to ordinary Portland cement (OPC) due to concerns regarding the environmental impact resulting from cement production, which releases carbon dioxide and degrades the quality of the environment. To address these concerns, researchers have explored the addition of supplementary binder materials to enhance cement properties and mitigate pollution. The effectiveness of these binder materials depends heavily on their chemical composition and fineness. Notably, ground granulated blast furnace slag (GGBS) enhances the strength and durability of the cement. In response to the scarcity of river sand (RS), dredged marine sand (DMS) has gained popularity as a potential substitute within the civil engineering field. Furthermore, the integration of nanomaterials has shown promising improvements in the mechanical and microstructural properties of mortar. Therefore, this study aims to investigate the properties of mortar by incorporating nano silica (NS) within the range of 1% to 7%, varying the molarity from 2 M to 8 M, and substituting RS with DMS. The tests carried out encompass a range of evaluations, including compressive strength, flexural strength, SEM-EDS, XRD, UPV, RCPT, and carbonation analysis, to comprehensively assess the properties of the mortar. The study reveals that the AAM demonstrates optimal performance when 50% of RS is replaced by DMS in the absence of NS. Once this optimal point is determined, further analyses are conducted at this value while varying the concentrations of NS from 1–7%. The experimental results indicate that replacing 50% of RS with DMS and incorporating 6% NS leads to maximum compressive strength (49.2 MPa) and flexural strength (9.36 MPa) in the assessed properties. Furthermore, the incorporation of NS in GGBS-based AAM mixes enhances durability by improving resistance against chloride penetration, reducing water absorption, and minimizing carbonation diffusion. Additionally, the microstructural and mineralogical characterization of GGBS-NS-based AAM specimens demonstrates the formation of C-S-H and C-A-S-H gels as the end products of the reactions.

Manufacturing nano novel composites using sugarcane and eggshell as an alternative for producing nano green mortar

Improving the Performance of Cement Mortar Using Granite Powder and Nano-Silica

Utilization of nanoparticles and waste materials in cement mortars

Investigations on the Preparation and Mechanical Properties of the Nano-Alumina Reinforced Cement Composite

Effect of nano materials on cementitious mortar composites exposed to sulphate attack

Effects of Al2O3, SiO2 nanoparticles, and g-c3n4 nanosheets on biocement production from agricultural wastes

Effect of Nano Compound Addition on the Properties and Microstructure of Cement Mortar with Mixed Fine Recycled Aggregate

Investigation of the use of cobalt and nickel based nanoalloys as cement mortar additives

Experimental investigation on the effect of incorporating nanomaterials on some properties of self-compacting cementitious mortar

The effect of nano-biochar produced from various raw materials on flow and mechanical properties of mortar

Influence of Nano-Silicon Dioxide in the Enhancement of Surface Structure of Public Filler and Properties of Recycled Mortar

Development of Mortars That Use Recycled Aggregates from a Sodium Silicate Process and the Influence of Graphene Oxide as a Nano-Addition

Investigation on the properties of sustainable alkali-activated GGBS mortar with nano silica and dredged marine sand: Mechanical, microstructural and durability aspects

A Comparative Study on the Influence of Nano and Micro Particles on the Workability and Mechanical Properties of Mortar Supplemented with Fly Ash

Utilizing industrial byproducts for the manufacture of clay-cellulose nanocomposite cements with enhanced sustainability

Assessment of the Mechanical Properties of High Strength Mortar Incorporating Silica Fume and Graphene Nanoplatelets: Experimental and Mathematical Modeling

Estimating the Impact of Nanophases on the Production of Green Cement with High Performance Properties

Influence of silicon-dioxide nanoparticles in cementitious mortars: verification using X-ray diffraction, thermal analysis, physical, and mechanical tests

Combined Effect of Nano Ferrite and Nano Silica onProperties of Cement Mortar

Influence of Nanoparticles on Fluidity and Mechanical Properties of Cement Mortar

Enhanced early hydration and mechanical properties of cement-based materials with recycled concrete powder modified by nano-silica