Abstract:Novel metal-intermetallic Ni/Ni3Al multilayer films are synthesized by a magnetron sputtering technique. The fractography, elastic modulus, and the oxidation resistance of the multilayer films are studied by a series of experimental tests. The scanning electron microscopy fractography of the films shows that both Ni and Ni3Al layers fracture with the appearance of ductile metal failure. No metal-intermetallic delamination appears in the multilayered films. Fluted dimpling in each Ni and Ni3Al layer is evident and continuous, layer through layer, illustrating very good adherence among the constituent layers. Such adherence makes the toughness of the Ni layers capable of transferring into the Ni3Al layers. Young's modulus of the Ni/Ni3Al film is found to be 226 and 253 +/- 10 GPa by nanoindentation and laser acoustic techniques, respectively. The continuity of elastic modulus between the two phases is revealed by nanoindentation test. The modulus continuity indicates an excellent integration of the constituent layers with similar crystal structure and close lattice constants. This integration makes the multilayers unsurpassed in comprehensive mechanical properties. Sheet resistance measurements show a good protective ability of the Ni/Ni3Al multilayers during high temperature oxidation. X-ray photoelectron spectroscopy spectra suggest that crystallized Al2O3/Ni scales formed during the deposition and subsequent annealing processes are apparently responsible for the stability of these films under oxidative conditions. The appearance of the crystallized Al2O3/Ni thin scales on the top of Ni3Al layers provides the Ni/Ni3Al multilayers good thermal oxidation resistance without lowering the fracture toughness.

Oxidation and Corrosion Behavior of Nanolaminated MAX-Phase Ti 2 AlC Film Synthesized by High-Power Impulse Magnetron Sputtering and Annealing

Microstructure and Oxidation Behaviors of (TiVCr)2AlC MAX-Phase Coatings Prepared by Magnetron Sputtering

Anti-Corrosion Property of Atomic Layer Deposition Films for Anodized Aluminum

Ti-Al-C Based MAX Phase Coating As Corrosion Protection for Ferritic Bipolar Plates

Oxidation behavior and interdiffusion of Ta Al multilayer films and Inconel 617 alloy

Oxidation Resistance of TiAlN/ZrN Multilayer Coatings

Corrosion behavior of Ti2 AlN powders under hydrothermal conditions in acid solutions

Microstructural and compositional design of Cr2AlC MAX phases and their impact on oxidation resistance

Mechanical and Oxidation Behavior of Textured Ti2AlC and Ti3AlC2 MAX Phase Materials

Effect of oxygen substitution and oxycarbide formation on oxidation of Ti3AlC2 MAX phase

Fractography, Elastic Modulus, and Oxidation Resistance of Novel Metal-Intermetallic Ni/Ni3al Multilayer Films

A study into enhanced oxidation resistance and its mechanism in Cr1-xAlxN/CrN/Cr multilayer films deposited on 9–12 % Cr heat-resistant steel

Structure and fracture toughness of TiAlN thin films deposited by deep oscillation magnetron sputtering

Ultrahigh strength-ductility of nanocrystalline Cr 2 AlC coating under micropillar compression

Preparation and performance of MAX phase Ti3AlC2 by in-situ reaction of Ti-Al-C system

Achieving Superior High-Temperature Strength and Oxidation Resistance of TiAl Nanocomposite through In Situ Semicoherent MAX Phase Precipitation

Corrosion and Tribocorrosion Performance of M (m=ta, Ti) Doped Amorphous Carbon Multilayers in Hank'S Solution

Influence of Oxidation on the Structural and Mechanical Properties of TiAlSiN Coatings Synthesized by Multi-Plasma Immersion Ion Implantation and Deposition

Design of amorphous-nanocrystalline films of TiAlCrNbZr x multi-component alloy: The effect of Zr on the corrosion resistance and mechanical properties

Enhanced Protective Coatings on Ti-10V-2Fe-3Al Alloy Through Anodizing and Post-Sealing with Layered Double Hydroxides

Combined Effect of Aluminum Content and Layer Structure on the Oxidation Performance of Ti1-Xalxn Based Coatings