Abstract:Unlike pulverized coal, biomass particles are neither small enough to neglect internal temperature gradients nor equant enough to model as spheres. Experimental and theoretical investigations indicate particle shape and size influence biomass particle dynamics, including essentially all aspects of combustion such as drying, heating, and reaction. This chapter theoretically and experimentally illustrates how these effects impact particle conversion. Experimental samples include disc/flake-like, cylindrical/cylinder-like, and equant (nearly spherical) shapes of wood particles with similar particle masses and volumes but different surface areas. Small samples (320 gm) passed through a laboratory entrained-flow reactor in a nitrogen atmosphere and a maximum reactor wall temperature of 1,600 K. Large samples were suspended in the center of a single-particle reactor. Experimental data indicate that equant particles react more slowly than other shapes, with the difference becoming more significant as particle mass or aspect ratio increases and reaching a factor of two or more for particles with sizes over 10 mm. A one-dimensional, time-dependent particle model simulates the rapid pyrolysis process of particles with different shapes. The model characterizes particles in three basic shapes (sphere, cylinder, and flat plate). With the particle geometric information (particle aspect ratio, volume, and surface area) included, this model simulates the devolatilization process of biomass particles of any shape. Model simulations of the three shapes show satisfactory agreement with the experimental data. Model predictions show that both particle shape and size affect the product yield distribution. Near-spherical particles exhibit lower volatile and higher tar yields relative to aspherical particles with the same mass under similar conditions. Volatile yields decrease with increasing particle size for particles of all shapes. Assuming spherical or isothermal conditions for biomass particles leads to large errors at most biomass particle sizes of practical interest.

The physical and mechanical properties for flexible biomass particles using computer vision

Modelling the Combustion of Thermally Thick Biomass Particles

Multi-Scale Simulation of Biomass Gasification in Fluidized Beds

New Pyrolysis Model for Biomass Particles in a Thermally Thick Regime

Efficient Pyrolysis Model for Large Biomass Particles with Arbitrary Shapes Based on a Composed-Sphere Concept and Voronoi Tessellation

Concurrent Measurement of the Size Distribution and Velocity of Pneumatically Conveyed Biomass Solids Using Acoustic Emission and Electrostatic Sensors

Numerical Investigation of Biomass Pyrolysis Performance in a Fluidized-Bed Reactor by a TFM-DEM Hybrid Model

Bubble Dynamics and Particle Orientation in a Binary Fluidized Bed Containing Spherocylinders and Spheres

Experimental Investigation On The Influence Of Air Velocity On The Particle Dispersion Behavior Of Rice Husk In A Fuel-Rich/Lean

Discrete element method-computational fluid dynamics analyses of flexible fibre fluidization

Friction and Shear Properties of Pine Biomass and Pellets

Study of air-steam gasification of spherocylindrical biomass particles in a fluidized bed by using CFD-DEM coupling with the multi-sphere model

Biomass Combustion Characteristics And Implications For Renewable Energy

Experimental Research on the Drying Characteristics of Flexible Fibrous Biomass Fuels in the Baffled-Rotary Cylinder

Modeling and Simulation of the Motion and Gasification Behaviors of Superellipsoidal Biomass Particles in an Entrained-Flow Reactor

Fluidisation of spherocylindrical particles: computational fluid dynamics–Discrete element method simulation and experimental investigation

Applicability of Mechanical Tests for Biomass Pellet Characterisation for Bioenergy Applications

Numerical study of the biomass pyrolysis process in a spouted bed reactor through computational fluid dynamics

A comprehensive pyrolysis model for lignocellulosic biomass particles with a special emphasis on the anisotropic characteristics

Quantitative Characterization of Pulverized Coal and Biomass–coal Blends in Pneumatic Conveying Pipelines Using Electrostatic Sensor Arrays and Data Fusion Techniques

Biomass Particle Models with Realistic Morphology and Resolved Microstructure for Simulations of Intraparticle Transport Phenomena