Abstract:There are two kinds of gasifier, the fixed bed and fluidized bed. The latter is paid much attention because of its advantages as a high intensity of gasification, a well-distributed temperature, easy controlling and the capacity for continuous and large-scale productions. So it is a matter of primary importance to simulate the chemical and physics phenomena in the fluidized bed gasifier by the dynamic model. The substance of building kinetic model is to write a set of dynamic equations that fit one kind of fluidized bed gasifier, and to confirm the dynamic parameters In it. Through the kinetic modeling study of gasification in the fluidized bed gasifier, we can not only get some reference data for designing the gasifier, but also predict the trend of some important variables such as the heat value, the quantity of product gas, the components of product gas and the efficiency of energy transformation.The researchers classify the fluidized bed gasifiers by the fluidized velocity of liquid or gas. For different fluidized bed gasifiers, different researchers have built a lot of dynamic models. Though the kinetic equations and the parameters used in the models are different, the methods to resolve the questions have a common ground. Firstly, by considering the geometrical structure of gasifier and analyzing its symmetrical degree, the dimension of the model can be decided. Then, the phases of materials in the gasifier are also considered and several important hypotheses are made. Lastly, as they are difficult to simulate and have less importance the complicated terms are neglected. The governing equations and the hypotheses compose the mathematical model of biomass gasification kinetics. After confirming the boundary conditions and the initial values, one result can be obtained. Then the result is compared with the experimental data and the degree of satisfactory agreement indicates whether the model is right and whether the hypotheses are reasonable.Currently, many kinetic models, each of which has a distinct standpoint, have been established for different fluid beds. But none of these models has been recognized because there are not enough experimental data to confirm them. Further validation is required. We classify and summarize the kinetic models that exist currently by the types of fluid beds, modeling hypotheses, etc. Although the predicted values of existed models tally with experimental data well. the models have many shortages. Advanced research can be proceeded with in several ways: (1) Model should be adjusted to apply in more gasifiers. (2) Because the virtual diameter of bubble cannot be calculated, calculation of non-linear chemistry can be taken into account based on the formula of diameter transformation of ideal bubble. (3) The values of several parameters in different conditions should be confirmed. (4) The factor of high pressure can be added into the model, and more experimental data to prove the validity of model is needed.

Review on Biomass Fluidized Bed Combustion/Gasification Sintering Characteristic and Mechanism

Experiment research on utilization of particle biomass fuel in sintering process

Combustion Kinetics Characteristics of Solid Fuel in the Sintering Process

Multi-Scale Simulation of Biomass Gasification in Fluidized Beds

Experimental Study on the Sintering Characteristics of Biomass Ash

The Fundamental Studies on Combustion of Sintering Flue Gas in Circulating Fluidized Bed

Experimental investigation on biomass combustion in a pilot-scale circulating fluidized bed combustor

Modeling and Prediction of Biomass Direct Fired Circulating Fluidized Bed Boiler Combustion System

Experimental Study on Pyrolysis and Combustion Properties of Biomass Briquette.

Discussions on the Effect of Operating Conditions on Biomass Gasification in Fluidized Bed Reactor

Particle Behaviours of Biomass Gasification in a Bubbling Fluidized Bed

Research on characteristics of wood pyrolysis and gasification in fluidized beds

Combustion characteristics of sludge in fluidized bed

Analysis on hot briquetting mechanism of biomass fuel pellets

Comparative Study on Biomass Treatment Equipment Based on Dry Anaerobic Fermentation and Direct Combustion Treatment

STUDY ON BIOMASS PYROLYSIS AND GASIFICATION IN A FLUIDIZED BED

An Important Topic In Biomass Clean Energy: Dynamic Models Of Fluidized Beds

An Overview Of Advances In Biomass Gasification

Modelling and Analysis of the Combustion Behaviour of Granulated Fuel Particles in Iron Ore Sintering

Numerical simulation of gasification characteristics in a circulating fluidized bed biomass gasifiers

Models for the combustion of single solid fuel particles in fluidized beds: A review