Abstract:As one of the core components of a turbine, the quality of the blade manufacturing has a strong impact on the energy conversion efficiency of the turbine, where the key technology of quality evaluation of blades is point cloud registration. However, with the application of structured light three-dimensional measurement technology in full profile measurement, the typical point cloud registration methods only focus on the minimization of surface profile error, ignoring the position error relative to reference datum, which can easily lead to the misjudgment of qualified blades. In this paper, a new blade error evaluation method is presented to register the point cloud data scanned from a physical blade to its theoretical CAD model, which fits the two surfaces based on parameter priority. Firstly, qualified blades are quickly selected after global fine registration using the best-fit algorithm. Subsequently, based on the priority of position error parameters, the coordinate descent algorithm combined with the minimum zone criterion is adopted for local fine registration, which guarantees accurate evaluation results. Finally, the shape and position error of the actual blade is obtained accurately by calculating transformation parameters of registration and the deviation between the registered point cloud and its CAD model of the blade. Experimental results show that compared with state-of-the-art registration methods, the presented method gives higher priority to the parameters which are difficult to finish or repair by machining, and the position errors are controlled in the tolerance area, which effectively reduces the misjudgment. In addition, evaluation results of blade errors with the method are mainly reflected in profile, which is valuable for guiding the blade finishing or trimming in practice.

Constraints and CFD simulation-based parametric reconstruction for 2D blade profile in reverse engineering

Constrained Fitting for 2D Profile-Based Reverse Modeling

Adjoint-Response Surface Method in Aerodynamic Shape Optimization of Turbomachinery Blades

Flow Reconstructions and Aerodynamic Shape Optimization of Turbomachinery Blades by POD-based Hybrid Models

Feature Array Extraction in Reverse Modeling of Turbine Blade

Secondary Flow Reduction By Blade Redesign And Endwall Contouring Using An Adjoint Optimization Method

An Iterative Inverse Design Method of Turbomachinery Blades by Using Proper Orthogonal Decomposition

A High-Precision T-spline Blade Modeling Method with 2D and 3D Knot Adaptive Refinement

Accurate Model Construction of Deformed Aero-Engine Blades for Remanufacturing

A Hybrid Method of Reconstructing 3D Airfoil Profile from Incomplete and Corrupted Optical Scans

Research and Application on Accurate Parametric Modeling of Aerofoil Blade

Surface Reconstruction for Thin Aero Engine Blade from Disorganized Contact Measured Points

Modeling and Analysis of a Francis Turbine Blade

An Improved Aerodynamic Performance Optimization Method of 3-D Low Reynolds Number Rotor Blade

Establishing large-scale wind turbine blade CAD model based on reverse engineering

Construction method of process model for correcting local profile errors of turbine blades

A New Methodology for Evaluating Profile and Position Errors of Blade Based on Parameter Priority

Design Methods and Strategies for Forward and Inverse Problems of Turbine Blades Based on Machine Learning

Intelligent System For Turbine Blade Overhaul Using Robust Profile Re-Construction Algorithm

Aerodynamic Optimization of Axial Turbomachinery Blades Using Parallel Adaptive Range Differential Evolution and Reynolds-averaged Navier-Stokes Solutions

A Fluid-Structure Coupling Method for Rotor Blade Unrunning Design