Abstract:There is an urgent need in surface mount technology (SMT) for a nontoxic, reusable and low temperature bonding technique which can afford good mechanical support as well as electrical contact. Meanwhile in the nanotechnology, many excellent and unique structure-related properties such as the high mechanical strength, the high conductivity and the adhesion ability of gecko feet have been studied. Our lab proposes a new patterned structure of Au nanowire array named nanowire surface fastener (NSF), which cold bonding for surface mount technology can be realized at room temperature. Then various methods have been developed to fabricate nanowire, such as arc discharge, catalytic CVD growth and template synthesis, and so on. Among these methods, the template method has been widely used for preparing one-dimensional nanostructures such as metals, semiconductors, polymers, and other materials by electrochemical, electroless deposition or sol-gel technique. Especially anodic aluminum oxide template assisted way has attached considerable attention due to its unique structure properties, such as controllable pore diameter, extremely narrow pore size distribution with high densities, high aspect ratios, and ideally cylindrical pore shape. The well arranged porous anodic aluminum oxide membrane is fabricated from aluminum film by two steps zM oxalic acid electrolytes. The anodic aluminum oxide membrane was investigated for features such as pore size, interpore distance, and thickness by 40 V. It is important for fabrication of porous anodic aluminum oxide template to find out elimination of the barrier layer of oxide and the pore extending rate by 0.5 M phosphoric acid. Morphologies of surface of aluminum film between anodization process and the anodic aluminum oxide barrier layer was researched by using atomic force microscope and scanning electron microscope. Results showed that the anodic aluminum oxide having the same diameter of the pore and the well arranged pore array without branching channel was obtained. The diameter of the pore before the pore extending treatment is 42 nm and the diameter of the pore after the pore extending treatment for 30 minutes is 86 nm. It was found that the diameter of the pore increased per 15 nm by the pore extending treatment for 10 minutes. We fabricated the through-hole anodic aluminum oxide template and made Cu nanowire by the template of our own making. By using Cu nanowire, we try to produce nanowire surface fastener and evaluate its properties.

Synthesis and characterization of porous anodic aluminum oxide with precise controllable pore diameter

A Controllable and Widely Applicable Electrochemical Anodization Process to Fabricate Porous Anodic Aluminum Oxide Membrane

Optical Device Based on a Nanopillar Array by the Pattern Transfer of an Anodic Aluminum Oxide Membrane

A Highly Controllable Electrochemical Anodization Process to Fabricate Porous Anodic Aluminum Oxide Membranes

Fabrication and Application of Nano-Porous Aluminum

Ordering and Modification of Nanopores in Porous Anodic Aluminum Membranes

Controllable Synthesis Of Pbo Nano/Microstructures Using A Porous Alumina Template

Fabrication and application of nanoporous anodic aluminum oxide: a review

Facile design of ultra-thin anodic aluminum oxide membranes for the fabrication of plasmonic nanoarrays

Fabricating Anodic Aluminum Oxide by Anodic-Oxidation

Fabrication of in Situ Ultrathin Anodic Aluminum Oxide Layers for Nanostructuring on Silicon Substrate

Fabrication of Anodic Aluminum Oxide Template and Cu Nanowire Surface Fastener

Fabrication and characterization of highly ordered nanotubes of anodic aluminum oxide

Pore-widening with the assistance of ultrasonic: A novel process for preparing porous anodic aluminum oxide membrane

Electrochemical Fabrication Of Novel Nanostructures Based On Anodic Alumina

Characterizing and optimizing the electropolishing and pore arrangement in porous anodic aluminum oxide (AAO)

Fabrication of Nanostructure by Porous Anodic Alumina

Preparation of Porous Anodic Aluminum Oxide in Water-Deficient Electrolytes

Preparation of anodic aluminum oxide nano-template using Al/Si substrate for large area LED applications

A highly controlled fabrication of porous anodic aluminium oxide surface with versatile features by spatial thermo-anodization

A Method of Controlling the Hole Size of Nanopores Array on Anodic Aluminum Oxide