Abstract:Purpose Pipelined analog-to-digital converters (ADCs) are widely used in electronic circuits. The purpose of this paper is to propose a new digital background calibration method to correct the capacitor mismatch, finite direct current (DC) gain and nonlinearity of residue amplifiers in pipelined ADCs. Design/methodology/approach The errors are corrected by defining new functions based on generalized Newton–Raphson algorithm. Although the functions have analytical solutions, an iterative procedure is used for calibration. To accelerate the calibration process, proper initialization for the errors is identified by using evaluation estimation block and solving inverse matrix. Findings Several behavioral simulations of a 12-bit 100MS/s pipelined ADC in MATLAB indicate that signal-to-(noise + distortion) ratio (SNDR) and spurious free dynamic range (SFDR) are improved from 30dB/33dB to 70dB/79dB after calibration. Calibration is achieved in approximately 2,000 clock cycles. Practical implications The digital part of the proposed method is implemented on field-programmable gate array to validate the performance of the pipelined ADC. The experimental result shows that the degradation of SNDR, SFDR, integral nonlinearity, differential nonlinearity and effective number of bits is negligible according to fixed-point operation vs floating-point in simulation results. Originality/value The novelty of this study is to use Newton–Raphson algorithm combined with appropriate initialization to reduce the number of divisions as well as calibration time, which is suitable in the recent nano-meter complementary metal oxide semiconductor technologies.

Digital background calibration of charge pump based pipelined ADC

Modeling of a 14-bit, 100-MS/s pipelined ADC with digital nonlinearity calibration

A Fast Combination Calibration of Foreground and Background for Pipelined ADCs

Parallel background calibration with signal-shifted correlation for pipelined ADC

Modeling of digital background calibration with signal-dependent dithering for a 14-bit, 100-MS/s pipelined ADC

A Maximum-Likelihood-Estimation-Based Digital Background Calibration Technique for Interstage Gain Error in Pipelined ADCs

A 14-bit 500MS/s and 1GS/s Configurable Pipelined ADC with Background Calibration

A Calibration Technique Based on Frequency-Domain Characteristics for Pipelined ADCs

A 14-Bit 500-Ms/s Pipelined-SAR ADC in 28-Nm CMOS with Foreground and Background Calibration

A Code-Pattern-driven Digital Background Calibration Technique for SAR ADCs

New digital background calibration method for pipelined ADCs

A Low-Power Low-Cost On-Chip Digital Background Calibration for Pipelined ADCs.

Digital Background Calibration Techniques for 2gs/s 12bit Time-Interleaved Pipelined ADC

A Calibration Scheme for a 800-Ms/s 14 Bit Pipelined ADC in 28-Nm CMOS

A 14-Bit Pipelined ADC with Digital Background Nonlinearity Calibration.

A Digital Blind Background Calibration Algorithm for Pipelined ADC

A 12-Bit 100 MS/s Pipelined ADC with Digital Background Calibration

Design of a 13 bit 50 MS/s CMOS Pipelined ADC

Design of a Novel 8-Bit 0.35-&Amp;#x00b5;m BiCMOS Pipelined ADC

A 12b 1GS/s Pipelined ADC with Digital Background Calibration of Inter-stage Gain, Capacitor Mismatch, and Kick-back Errors

A 2.9-mW 11-b 20-MS/s pipelined ADC with dual-mode-based digital background calibration