Abstract:Purpose Pipelined analog-to-digital converters (ADCs) are widely used in electronic circuits. The purpose of this paper is to propose a new digital background calibration method to correct the capacitor mismatch, finite direct current (DC) gain and nonlinearity of residue amplifiers in pipelined ADCs. Design/methodology/approach The errors are corrected by defining new functions based on generalized Newton–Raphson algorithm. Although the functions have analytical solutions, an iterative procedure is used for calibration. To accelerate the calibration process, proper initialization for the errors is identified by using evaluation estimation block and solving inverse matrix. Findings Several behavioral simulations of a 12-bit 100MS/s pipelined ADC in MATLAB indicate that signal-to-(noise + distortion) ratio (SNDR) and spurious free dynamic range (SFDR) are improved from 30dB/33dB to 70dB/79dB after calibration. Calibration is achieved in approximately 2,000 clock cycles. Practical implications The digital part of the proposed method is implemented on field-programmable gate array to validate the performance of the pipelined ADC. The experimental result shows that the degradation of SNDR, SFDR, integral nonlinearity, differential nonlinearity and effective number of bits is negligible according to fixed-point operation vs floating-point in simulation results. Originality/value The novelty of this study is to use Newton–Raphson algorithm combined with appropriate initialization to reduce the number of divisions as well as calibration time, which is suitable in the recent nano-meter complementary metal oxide semiconductor technologies.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the conversion error problem in pipelined analog - to - digital converters (Pipelined ADCs) caused by capacitor mismatch, the finite DC gain of the residue amplifier and nonlinearity. Specifically, these errors will affect the performance of ADCs, such as key indicators like signal - to - noise - plus - distortion ratio (SNDR) and spurious - free dynamic range (SFDR). In order to improve these performance indicators, the author proposes a new digital background calibration method. This method is based on the generalized Newton - Raphson algorithm and combines appropriate initialization techniques to reduce digital complexity and calibration time. This method can not only effectively correct the above - mentioned errors but also has good applicability in modern nanoscale complementary metal - oxide - semiconductor (CMOS) technology. ### Main contributions of the paper: 1. **Proposing a new digital background calibration method**: This method corrects capacitor mismatch, the finite DC gain of the residue amplifier and nonlinearity problems by defining a new function based on the generalized Newton - Raphson algorithm. 2. **Reducing digital complexity and calibration time**: By using the Newton - Raphson algorithm and appropriate initialization techniques, the division operations required in the calibration process are reduced, thereby reducing digital complexity and calibration time. 3. **Verifying the effectiveness of the method**: Through MATLAB simulation and FPGA implementation, the effectiveness of this method in improving SNDR and SFDR is verified, and a significant improvement in the performance of the calibrated ADC is achieved. ### Key technical details: - **Generalized Newton - Raphson algorithm**: It is used to iteratively solve the calibration coefficients \( b_1 \) and \( b_3 \), avoiding direct division operations, thereby reducing digital complexity. - **Appropriate initialization technique**: By analyzing the residual characteristics of the ADC, the estimated values of the initial calibration coefficients are determined, which accelerates the calibration process. - **FPGA implementation**: The digital background calibration method is implemented on the FPGA, verifying its feasibility and robustness in practical applications. ### Experimental results: - **Simulation results**: A behavioral simulation was carried out in MATLAB. The results show that after calibration, SNDR and SFDR are increased from 30 dB/33 dB to 70 dB/79 dB respectively, and the calibration process takes approximately 2,000 clock cycles. - **FPGA implementation**: This method was implemented on the SPARTAN6 XC6SLX9 FPGA. The experimental results show that the performance of the calibrated ADC is basically consistent with the simulation results, only slightly decreased due to fixed - point operations. ### Conclusion: The digital background calibration method proposed in this paper performs excellently in reducing digital complexity and calibration time, can effectively correct capacitor mismatch, the finite DC gain of the residue amplifier and nonlinearity problems in pipelined ADCs, and significantly improves the performance of ADCs. This method is applicable to modern nanoscale CMOS technology and has high practical value.

New digital background calibration method for pipelined ADCs

Modeling of a 14-bit, 100-MS/s pipelined ADC with digital nonlinearity calibration

A Fast Combination Calibration of Foreground and Background for Pipelined ADCs

Parallel background calibration with signal-shifted correlation for pipelined ADC

A Maximum-Likelihood-Estimation-Based Digital Background Calibration Technique for Interstage Gain Error in Pipelined ADCs

A Calibration Technique Based on Frequency-Domain Characteristics for Pipelined ADCs

Modeling of digital background calibration with signal-dependent dithering for a 14-bit, 100-MS/s pipelined ADC

A Calibration Scheme for a 800-Ms/s 14 Bit Pipelined ADC in 28-Nm CMOS

A 14-bit 500MS/s and 1GS/s Configurable Pipelined ADC with Background Calibration

A Code-Pattern-driven Digital Background Calibration Technique for SAR ADCs

A 14-Bit Pipelined ADC with Digital Background Nonlinearity Calibration.

A Digital Background Calibration Scheme for Non-Linearity of SAR ADC Using Back-Propagation Algorithm

A Novel Digital Calibration With Low Complexity For Pipelined Adc

A background digital self-calibration scheme for pipelined ADCs based on transfer curve estimation

A Digital Calibration Technique with High Speed and Low Complexity

A Low-Power Low-Cost On-Chip Digital Background Calibration for Pipelined ADCs.

Digital Background Calibration in Pipelined ADCs Using Commutated Feedback Capacitor Switching

A Digital Blind Background Calibration Algorithm for Pipelined ADC

A Robust and Simple Two-Mode Digital Calibration Technique for Pipelined ADC

A Comprehensive Digital Calibration for Pipelined ADCs Using Cascaded Nonlinearity Correction

Multipurpose error calibration of pipeline analog‐to‐digital converters using decision points of the residue curve in sub‐analog‐to‐digital converters