Abstract:This paper presents a two-mode digital calibration technique for pipelined analog-to-digital converters (ADC). The proposed calibration eliminates the errors of residual difference voltage induced by capacitor mismatch of pseudorandom (PN) sequence injection capacitors at the ADC initialization, while applies digital background calibration to continuously compensate the interstage gain errors in ADC normal operation. The presented technique not only reduces the complexity of analog circuit by eliminating the implementation of PN sequence with accurate amplitude in analog domain, but also improves the performance of digital background calibration by minimizing the sensitivity of calibration accuracy to sub-ADC errors. The use of opamps with low DC gains in normal operation makes the proposed design more compatible with future nanometer CMOS technology. The prototype of a 12-bit 40-MS/s pipelined ADC with the two-mode digital calibration is implemented in 0.18-μm CMOS process. Adopting a simple telescopic opamp with a DC gain of 58-dB in the first stage, the measured SFDR and SNDR within the first Nyquist zone reach 80-dB and 66-dB, respectively. With the calibration, the maximum integral nonlinearity (INL) of the ADC reduces from 4.75-LSB to 0.65-LSB, while the ADC core consumes 82-mW at 3.3-V power supply.

A 2.9-mW 11-b 20-MS/s pipelined ADC with dual-mode-based digital background calibration

Modeling of digital background calibration with signal-dependent dithering for a 14-bit, 100-MS/s pipelined ADC

Modeling of a 14-bit, 100-MS/s pipelined ADC with digital nonlinearity calibration

A Fast Combination Calibration of Foreground and Background for Pipelined ADCs

A 14-bit 500MS/s and 1GS/s Configurable Pipelined ADC with Background Calibration

A 16-Bit 2.5-Ms/s SAR ADC with On-Chip Foreground Calibration

Parallel background calibration with signal-shifted correlation for pipelined ADC

A Maximum-Likelihood-Estimation-Based Digital Background Calibration Technique for Interstage Gain Error in Pipelined ADCs

A 14-Bit 500-Ms/s Pipelined-SAR ADC in 28-Nm CMOS with Foreground and Background Calibration

A 14bit 500MS/s 85.62dBc SFDR 66.29dB SNDR SHA-less pipelined ADC with a stable and high-linearity input buffer and aperture-error calibration in 40nm CMOS

A 48-Mw, 12-Bit, 150-Ms/s Pipelined ADC with Digital Calibration in 65nm CMOS

A Robust and Simple Two-Mode Digital Calibration Technique for Pipelined ADC

A 12-Bit 100 MS/s Pipelined ADC with Digital Background Calibration

A Low Power 12-Bit 40ms/s Pipelined ADC with Digital Calibration

A 12b 1GS/s Pipelined ADC with Digital Background Calibration of Inter-stage Gain, Capacitor Mismatch, and Kick-back Errors

A 12-Bit 40 Ms/S Pipelined Adc With Over 80 Db Sfdr

Design of a 13 bit 50 MS/s CMOS Pipelined ADC

A 150 MS/s 10-Bit CMOS Pipelined Subranging ADC with Time Constant Reduction Technique.

A 10-bit 30-MS/s 50mW pipelined A/D converter

A 2.5-Gs/s Time-Interleaved SAR-Assisted Ringamp-Based Pipelined ADC with Digital Background Calibration

Exploiting Process Variation and Noise in Comparators to Calibrate Interstage Gain Nonlinearity in Pipelined Adcs