Abstract:Flexoelectric material under certain inhomogeneous electric field can be utilized to control the vibration of flexible structure based on the converse flexoelectric effect. The atomic force microscope (AFM) probe placed on the top of flexoelectric patch and the electrode under it with certain voltage applied between them are used to generate the inhomogeneous electric field. The actuation membrane force and bending moment induced by flexoelectric patch in turn influence the vibration of shells. In this study, an elastic cantilever beam excited by an initial static mechanical force locating at the tip end is considered. As the mechanical force withdraws the snapback response appears where the cantilever beam vibrates with all mode participating and their amplitudes decaying exponentially. Multiple actuators, consist of AFM probes and flexoelectric patches, are used here to accelerate the decrease of snapback response. On each probe voltages of multiple frequencies are applied to obtain the control effects on multiple modes. The actuator’s positions minimizing the tip displacement of the beam is selected as the optimal ones. Two way of determining the control voltage, i.e., open loop and close loop, is introduced and the information of positions of the actuators are emphasized in both methods. In case studies, the free damping vibration of the beam without control is evaluated and the first mode dominates the vibration. The open loop method, with constant amplitude of control voltage, doesn’t work well in a relatively long time scale. While the close loop method, with its control voltage related to the tip displacement detected by a sensor, turns out to be more stable and effective. The optimal positions for the actuations of both methods are clustered near the fixed end, where the actuation factor reaches its maximal value. At last, limitation on voltage amplitude is implemented to avoid the stress concentration, under which the control effect does not weaken much. This study serves as an introduction to flexoelectric material & multiple AFM probe based vibration control and a theoretical foundation for further researches.

High-Frequency Vibration Control of Rotating Beam Based on Trailing-edge Flap

A Study on Influence of Flapping Dynamic Characteristics on Vibration Control of Active Rotor with Trailing-Edge Flaps

A New X-Actuator Design for Controlling Wing Bending and Twisting Modes

A NEW X-ACTUATOR DESIGN FOR DUAL BENDING/TWISTING CONTROL OF WINGS

Vibration Control of an Active Magnetic Bearings Flexible Rotor System Based on Adaptive Recursive Least Square Algorithm

Analysis and control of transient aero-elastic response of teetering rotor on the shipboard

Active control with multi-frequency transmission force of multi-span rotor system

Vibration Control for Active Magnetic Bearing High-Speed Flywheel Rotor System with Modal Separation and Velocity Estimation Strategy

Data-driven active vibration control for helicopter with trailing-edge flaps using adaptive dynamic programming

Smart Active Vibration Control System of a Rotary Structure Using Piezoelectric Materials

Active vibration control strategy based on linear matrix inequality for rotor system

Stochastic Vibration Suppression Analysis of an Optimal Bounded Controlled Sandwich Beam with MR Visco-Elastomer Core

Multi-Input/Multi-Output Adaptive Output Feedback Control Design for Aeroelastic Vibration Suppression

Model free adaptive control of large and flexible wind turbine rotors with controllable flaps

Control of Beam’s Snapback Responses Using Multiple Flexoelectric Actuators

Active Vibration Control of Composite Cantilever Beams

Aerodynamic load control in horizontal axis wind turbines with combined aeroelastic tailoring and trailing‐edge flaps

Improved active vibration control of a cantilever beam using MFC actuators with Hammerstein model-based hysteresis modeling and VSS-FxLMS control algorithm

Nonlinear modelling and adaptive control of smart rotor wind turbines

Active vibration control of a flexible beam based on experimental modal analysis

Control on wind turbine rotor aerodynamics and platform motions employing trailing edge flaps