Abstract:The technical progress in the development and industrialization of floating offshore wind turbines (FOWTs) over the past decade has been significant. Yet, the higher levelized cost of energy (LCOE) of FOWTs compared to onshore wind turbines is still limiting the market share. One of the reasons for this is the larger motions and loads caused by the rough environmental excitations. Many prototype projects tend to employ more conservative substructure designs to meet the requirements for motion dynamics and structural safety. Another challenge lies in the multidisciplinary nature of a FOWT system, which consists of several strongly coupled subsystems. If these subsystems cannot work in synergy, the overall system performance may not be optimized. Previous research has shown that a well-designed blade pitch controller is able to reduce the motions and structural loads of FOWTs. Nevertheless, due to the negative aerodynamic damping effect, improvement in the performance by tuning the controller is limited. One of the solutions is adding tuned liquid multi-column dampers (TLMCDs), meaning that there is a structural solution to mitigate this limiting factor for the controller performance. It has been found that the additional damping, provided by TLMCDs, is able to improve the platform pitch stability, which allows a larger blade pitch controller bandwidth and thus a better dynamic response. However, if a TLMCD is not designed with the whole FOWT system dynamics taken into account, it may even deteriorate the overall performance. Essentially, an integrated optimization of these subsystems is needed. For this paper, we develop a control co-design optimization framework for FOWTs installed with TLMCDs. Using the multi-objective optimizer non-dominated sorting genetic algorithm II (NSGA-II), the objective is to optimize the platform, the blade pitch controller, and the TLMCD simultaneously. Five free variables characterizing these subsystems are selected, and the objective function includes the FOWT's volume of displaced water (displacement) and several motion and load indicators. Instead of searching for a unique optimal design, an optimal Pareto surface of the defined objectives is determined. It has been found that the optimization is able to improve the dynamic performance of the FOWT, which is quantified by motions and loads, when the displacement remains similar. On the other hand, if motions and loads are constant, the displacement of the FOWT can be reduced, which is an important indication of lower manufacturing, transportation, and installation costs. In conclusion, this work demonstrates the potential of advanced technologies such as TLMCDs to advance FOWTs for commercial competitiveness.

Control on wind turbine rotor aerodynamics and platform motions employing trailing edge flaps

Data-driven control of the coupled loads for floating wind turbine systems based on deformable trailing edge flaps

Adaptive Nonlinear Power Regulation Control of Floating Wind Turbines with Platform Motion Reduction

Experimental and Numerical Analysis of Power Take-off Control Effects on the Dynamic Performance of a Floating Wind-Wave Combined System

Model free adaptive control of large and flexible wind turbine rotors with controllable flaps

Nonlinear modelling and adaptive control of smart rotor wind turbines

Trailing-Edge Flap Control for Mitigating Rotor Power Fluctuations of a Large-Scale Offshore Floating Wind Turbine under the Turbulent Wind Condition

Control co-design optimization of floating offshore wind turbines with tuned liquid multi-column dampers

Control of a Floating Wind Turbine on a Novel Actuated Platform

Adaptive sliding mode-based feedback linearization control for floating offshore wind turbine in region II

Inverse Optimal Adaptive Neural Power Regulation Control for Variable-Speed Wind Turbines with Load Mitigation

Coordinated Power and Structural Load Optimization for Offshore Wind Turbines with Nonlinear Model Predictive Generator Torque Control

Real-Time Repositioning of Floating Wind Turbines Using Model Predictive Control for Position and Power Regulation

Multi-objective Performance Enhancement of Offshore Wind Turbines Through Planning Controller Parameter: A ‘Plan-Control’ Hierarchical Controller

Dynamic Modeling and Control for an Offshore Semisubmersible Floating Wind Turbine

Performance and Effect of Load Mitigation of a Trailing-Edge Flap in a Large-Scale Offshore Wind Turbine

Design Optimization of Spar Floating Wind Turbines Considering Different Control Strategies

Load Reduction of Semi-Submersible Floating Wind Turbines by Integrating Heaving-Type Wave Energy Converters with Bang-Bang Control

Coupled modeling and structural vibration control for floating offshore wind turbine

Platform Stabilization of Floating Offshore Wind Turbines by Artificial Muscle Based Active Mooring Line Force Control

Improved torque compensation control based-maximum power point tracking strategy for large scale floating offshore wind turbines