Abstract:As the size of wind turbines (WTs) increase, an additional increase in the structural load on the WT components is to be expected. This will have an impact on operational safety in terms of damage and service life. Spatial and temporal fluctuations in wind speed are responsible for the fatigue load during power generation. To minimize the effects of varying stresses, advanced control systems that incorporate appropriate models of the disturbances are proposed. These controllers are usually developed based on reduced-order models of nonlinear WTs, hence are affected by uncertainties such as modeling errors. Although robust controllers are able to deal with uncertainties, they are still only developed for design situations. Therefore, their performance can deteriorate significantly under very uncertain operating conditions. On the other hand, adaptive controllers are designed to consider multiple operating points in the design. However, most of these methods do not consider the optimization of different objectives in the design for structural load reduction or speed control of WTs. In this paper, a novel adaptive robust observer-based control strategy for structural load reduction and rotor speed regulation in commercial WTs operating at high wind speed regime is proposed. To achieve this, a robust disturbance accommodating controller (RDAC) is combined with an adaptive pitch controller (aIPC), which adapts to changing operating points. The proposed control method is tested on a 1.5 MW reference WT (RWT) developed by the National Renewable Energy Laboratory (NREL). The simulation results show that, compared with the state of the art presented on a gain-scheduled proportional integral (GSPI) and RDAC controllers, the proposed control method reduces the structural load on the rotor blades by 10.7 % and 9.2 %, respectively, and on the tower by 36.2 % and 8.4 %, respectively. Therefore, it makes a key contribution to mitigating the structural dynamic loads on WTs by reducing the load on multiple components. This is achieved without any significant impact on the rotor speed and power regulation performance or the generated power under changing operating conditions.

Model free adaptive control of large and flexible wind turbine rotors with controllable flaps

Nonlinear modelling and adaptive control of smart rotor wind turbines

Load Control of Wind Turbine Based on Model-free Adaptive Controller

Control on wind turbine rotor aerodynamics and platform motions employing trailing edge flaps

Aerodynamic load control in horizontal axis wind turbines with combined aeroelastic tailoring and trailing‐edge flaps

Data-driven control of the coupled loads for floating wind turbine systems based on deformable trailing edge flaps

Adaptive Continuous Neural Pitch Angle Control for Variable‐Speed Wind Turbines

Adaptive Dual-layer Sliding Mode Control for Wind Turbines with Estimated Wind Speed

Inverse Optimal Adaptive Neural Power Regulation Control for Variable-Speed Wind Turbines with Load Mitigation

Nonlinear model predictive pitch control of aero-elastic wind turbine blades

Active alleviation of fatigue stress on blades by adaptively maneuvered deformable trailing edge flaps (DTEF)

Combined Individual Pitch and Flap Control for Load Reduction of Wind Turbines

Multi-objective Optimization of Active Dry Friction Damper-Rotor Systems Based on Predictive Control

Optimization Control for Flapping Load Mitigation and Output Power Levelling of Wind Turbine

A comparison of smart rotor control approaches using trailing edge flaps and individual pitch control

Aeroelastic Response of Wind Turbine Rotors under Rapid Actuation of Flap-Based Flow Control Devices

Asymmetric Load Control Method for Individual Pitch of Horizontal Axis Marine Current Turbine

Hybrid Intelligent Feedforward-Feedback Pitch Control for VSWT with Predicted Wind Speed

Model predictive control of wind turbine with aero-elastically tailored blades

Linear interpolation model predictive control of large wind turbines for blade asymmetric fatigue loads mitigation

Adaptive Robust Observer-Based Control for Structural Load Mitigation and Speed Regulation in Commercial Wind Turbines