Abstract:Although different damage-coupled physically based models have been proposed, those damage models are established based on the isothermal uniaxial or multi-axial tensile condition. However, the influence of the stress state on ductile failure strain is not adequately considered in the thermal damage models. It is widely recognized that the stress state has significant effect on damage evolution and ductility fracture for metallic materials. Actually, the current damage-coupled physically based models are not suitable for complex hot forming and the applications of these damage-coupled models are mainly focused on sheet hot stamping forming to date. Therefore, a modified damage-coupled unified model considering a broad range of stress states was established to figure out the complex damage behavior and microstructure evolution of metallic materials during the thermal deformation process. In this study, the Mg-6Gd-5Y-0.3Zr alloy was used as the experimental material. First, the flow behavior of the alloy was explored using a series of experiments under various stress states (i.e., uniaxial tensile, shear and compression) under various combinations of strain rates and temperatures. On this basis, a modified damage-coupled physics-based model was developed, in which the dynamic recrystallization, damage, stress triaxiality and Lode parameter were included as internal state variables. Furthermore, the model was integrated into ABAQUS to verify the applicability using hot spinnability test because the stress state was very complex during the forming process. The comparison between the calculated results and experiments is carried out. According to the simulation result, the predicted ultimate thinning rate is 71.14%, with an error of only 7.85% from the experimentally measured ultimate thinning rate of 77.2%, and the correlation coefficient and error for thickness and profile between the predicted values and experimental values are 0.9980 and 5.05%, respectively. These demonstrate that the developed model is reliable.

A new entropy-based metallic material stress relaxation engineering prediction method

Prediction methodology of stress relaxation performance based on continuum damage mechanics

An Engineering Prediction Model for Stress Relaxation of Polymer Composites at Multiple Temperatures

Prediction of Fatigue Crack Damage Using In-Situ Scanning Electron Microscopy and Machine Learning

A Transition State Theory-Based Continuum Plasticity Model Accounting for the Local Stress Fluctuation

Stress Relaxation Performance and Prediction Models for Bolt Material of 1Cr10nimow2vnbn

Experimental and Numerical Study of Progressive Failure of Ductile Metals

Mean Stress Effect Correction in Strain Energy-Based Fatigue Life Prediction of Metals

Creep Based Stress Relaxation Damage Model for High Temperature Components

Creep based prediction model of stress relaxation behavior for high temperature materials

Improved Distortion Prediction in Additive Manufacturing Using an Experimental-Based Stress Relaxation Model

Fatigue life prediction model of metallic materials considering crack propagation and closure effect

A New Regression Model for the Prediction of the Stress–Strain Relations of Different Materials

Modeling of the thermal softening of metals under impact loads and their temperature–time correspondence

A Dislocation Density-Based Model for the Temperature Dependent Anomalous Behaviors of Nickel-Based Single-Crystal Superalloy

Thermomechanical fatigue life prediction of metallic materials by a gradient‐enhanced viscoplastic damage approach

A rate-dependent damage mechanics model for predicting plasticity and ductile fracture behavior of sheet metals at high strain rates

A Thermal Damage-Coupled Constitutive Model for Predicting Fracture and Microstructure Evolution and Its Application in the Hot Spinnability Process

A Unified Constitutive Model of Stress Relaxation of Ti-6Al-4V Alloy with Different Temperatures from Elastic to Plastic Loading

An improved method for fatigue life prediction of metal materials based on thermodynamic entropy

Average creep rate model for prediction of stress relaxation