Abstract:Due to the advantages of high-temperature resistance, low thermal expansion coefficient, and thermal shock resistance, etc., graphite is regarded as one of the materials for the first wall of nuclear fusion devices. The real-time monitoring of temperature distribution of the first wall based on an infrared camera is widely used to guarantee the stable operation of devices. To accurately measure the temperature of the first wall, it is important to measure the normal emissivity of graphite. However, the emissivity of graphite is affected by many factors. For example, the effect of the surface layers, like carbon-hydro layers-layers, will influence the measurement of the emissivity. The ambition of this work is to study the relationship between graphite emissivity and infrared camera with filters of different wavelengths and the roughness of graphite, and then give the proposed emissivity model to improve the accuracy of graphite surface temperature measurement. The experiment is carried out with a FLIR infrared camera and calibrated by using a blackbody furnace. The emissivity at given temperatures is systematically investigated. By using an infrared camera with no filter (band wavelength range of 7.5 ∼13 μm), a 10.2±0.1 μm filter, and a 10.8±0.19 μm filter, this paper studies the relationship between the temperature and emissivity of graphite from 150℃ to 500℃ and calculates the relative error of temperature measurement respectively. A suitable fitting model which fits emissivity curves is selected. The measurement results show the use of a 10.2 μm filter to measure the graphite surface temperature has the smallest relative error, the range is 0.90%∼1.17%. The emissivity of graphite with different roughness is also studied. At the same temperature, the greater the roughness of the graphite surface, the higher the emissivity value. The uncertainty of the emissivity measurement is analyzed, and its value is 0.0099∼0.0211. The graphite surface temperature measurement method based on the emissivity model proposed in this paper provides useful references for the non-contact temperature measurement of the first wall in nuclear fusion devices. The research results can be used as a reference for plasma experiments in some fusion devices and other similar applications.

Uncertainty Assessment for Very High Temperature Thermal Diffusivity Measurements on Molybdenum, Tungsten and Isotropic Graphite

Metal-carbon eutectic high temperature fixed points for in-situ calibration of radiation thermometers

Measurement Uncertainty of Surface Temperature Distributions for Laser Powder Bed Fusion Processes

High temperature measurement set-up for the electro-mechanical characterization of robust thin film systems

Quantitative Measurement of Thermal Conductivity by SThM Technique: Measurements, Calibration Protocols and Uncertainty Evaluation

Measurement of Thermal Diffusivity at High Pressure Using a Transient Heating Technique

Measuring spectral emissivity up to 4000 K

Surrogate-accelerated Bayesian framework for high-temperature thermal diffusivity characterization

Strain Field Measurements over 3000 °C Using 3D-Digital Image Correlation

A Critical Evaluation of Pressure Scales at High Temperatures by in Situ X-ray Diffraction Measurements

Uncertainty evaluation for density measurements of molten Ni, Zr, Nb and Hf by using a containerless method

Research on the normal emissivity of graphite between 150 and 500 °C by an infrared camera for nuclear fusion devices

A Modified Directional Flame Thermometer: Development, Calibration, and Uncertainty Quantification

Measurement and Uncertainty Assessment of the Thermal Conductivity and Diffusivity of Silica Glass using Step-Wise Transient Method

Traceable thermal imaging in harsh environments

Experimental setup for thermal measurements at the nanoscale using a SThM probe with niobium nitride thermometer

Precision measurements of the thermal conductivity, electrical resistivity, and Seebeck coefficient from 80 to 400 K and their application to pure molybdenum

On The Measurement of Temperature in Material Removal Processes

Accurate Measurements of Thermal Conductivity and Thermal Diffusivity of Molten Carbonates

High temperature tests for graphite materials

Experimental set-up for thermal measurements at the nanoscale using an SThM probe with niobium nitride thermometer