Abstract:With the increase in computational costs driven by the use of artificial intelligence, enhancing the performance of semiconductor systems while improving efficiency has become an inevitable challenge. Due to the fine pitch limits of micro bumps, bumpless Cu-Cu bonding is emerging as the next-generation core technology. This study aims to analyze the effects of individual temperature and pressure on both large- and local-scale behaviors of material in the Cu-Cu bonding process with experiments and numerical analysis. The motivation of this study is to compensate the deficiencies in reported studies on process optimization, particularly the lack of exploration of the separated effects of temperature and pressure on large- and local-scale Cu-Cu bonding. Furthermore, reports on the thermodynamic modeling of Cu-Cu bonding behavior are not sufficient, making it challenging to find suitable models. Bonding experiments were performed by independently controlling the temperature and pressure using blank Cu films treated by precise chemical mechanical polishing (CMP) processes. The large-scale bonded area under each condition was measured, and transmission electron microscope (TEM) images were captured to observe the patterns of local void formation under various temperature and pressure conditions. In the experiments, it was observed that the temperature increase had a greater impact on the bonded area at a larger scale than the increase in pressure. However, for nanoscale-local voids, an increase in pressure had a more dominant effect. To discuss the experimental results, a thermodynamic modeling framework that considers coupled heat-induced deformation, plastic deformation, and volumetric changes caused by material flux was proposed. The proposed model has been implemented in the user-defined material subroutine (UMAT) of the ABAQUS program for finite element (FE) analysis. Numerical analysis using the proposed model captures the experimental data well. In large-scale simulations, temperature conditions have a significant impact, with plastic deformation being the primary mode of deformation, while the pressure conditions dominate the material flux, making substantial contributions to reducing voids at local-scale. To achieve complete closure of the void, the simulation demonstrated that maintaining a sufficient pressure gradient until the complete closure is required. The study findings provide an explicit understanding of how the temperature and pressure conditions differently affect large-scale bonding and local voids for semiconductor package manufacturing.

Thermodynamic simulation and analysis of metal bumps in flip-chip micro-LED packaging

Analysis of thermal spreading resistance in high power LED package and its design optimization

Fabrication and Mechanical Properties Improvement of Micro Bumps for High-Resolution Micro-LED Display Application

Effects of shear test temperatures and conditions on mechanical properties of Sn–Ag flip-chip solder bumps

Experimental Study and Taguchi Analysis on LED Cooling by Thermoelectric Cooler Integrated with Microchannel Heat Sink

Predicting fatigue life of Solder joint with submodel method for a BGA package

Research on the reliability of Micro LED high-density solder joints under thermal cycling conditions

Optimization of Micro-interconnection Distribution of Gold Stud Bumps for Thermo-sonic Flip Chip Bonding

Stress analysis of "Micro-Bump Bonding" structure for "Chip on glass" packaging

Development of Equivalent Material Properties of Microbump for Simulating Chip Stacking Packaging

Thermal Management for Microscale Inorganic Light-Emitting Diodes

Interfacial Crack Effect on Thermal Mechanical Behavior of Solder Bump for Flip-Chip Package: A Numerical Analysis

Failure Mechanism and Predictive Modeling for Microbump Interconnects Drop Life Under Diverse Impact Angles in Advanced Packaging

Thermal Fatigue Analysis of Microbumps in a 3D TSV Integration Device

Junction temperature and reliability of high-power flip-chip light emitting diodes

Thermodynamic modeling framework with experimental investigation of the large-scale bonded area and local void in Cu-Cu bonding interface for advanced semiconductor packaging

Modeling the Thermal-Compression Flip-Chip Process by Finite Element Analysis

Inlet/outlet Induced Failures During Flip-Chip Bonding of Large Area Chip with Embedded Microchannels

A Thermal Analysis of the Operation of Microscale, Inorganic Light-Emitting Diodes

Mechanical and Electrical Reliability Assessment of Bump-Less Wafer-on-wafer Integration with One-Time Bottom-Up TSV Filling

Reliability Evaluation of Board-Level Flip-Chip Package under Coupled Mechanical Compression and Thermal Cycling Test Conditions