Abstract:A layout design that passes the design rule check (DRC) may still have manufacturing problems today, especially around areas of critical patterns. Thus a design-for-manufacturability (DfM) model, which can simulate the process from designed layout to wafer and predict the final contours, is necessary. A new kind of DfM model called free-element-model (FEM) is proposed in this paper. The framework of FEM is borrowed from the forward process model, which is basically a set of convolution kernels in matrix form, yet the unknown variables are the kernel elements instead of process parameters. The modeling process is transformed into a non-linear optimization problem, with equality constraints which involve norm-2 regulation of kernels and inner production of any two kernels to keep the normalization and orthogonality of optimized kernels. Gradient-based method with Lagrange penalty function is explored to solve the optimization problem to minimize the difference between simulated contours and real contours. The dimension of kernels in FEM is determined by the cutoff frequency and the ambit. Since kernels are calculated by optimization method instead of decomposition of transmission cross coefficient (TCC), every element of kernels becomes a factor to describe the process. FEM is more flexible, and in it all effects that can be integrated into convolution kernels join naturally, such as the resist deviation and asymmetry of the process. No confidential process parameters, for example NA and defocus, appear in FEM explicitly, and thus the encapsulated FEM is suitable for IC manufacturers to publish. Moreover, enhancements and supplements to FEM are discussed in this paper, including the sufficiency of test patterns. In our experiments, DfM models for 2 process lines are generated based on test patterns, and the results show that the simulated shapes have an area error less than 2% compared to the real shapes of test patterns and an area error less than 3% compared to the shapes in typical blocks chosen from chip for verification purpose. The root mean square error of contour deviation between the 2 simulation results from FEM and conventional lithographic model is 10nm in a 65nm process.

Modeling the Thermal-Compression Flip-Chip Process by Finite Element Analysis

Transient Electrothermal Analysis of Multilevel Interconnects in the Presence of ESD Pulses Using the Nonlinear Time-Domain Finite-Element Method

Finite Element Model of Milling Process Sequence for Frame Monolithic Components

Simulation of 3d Chip Shaping of Aluminum Alloy 7075 in Milling Processes

The Finite Element Analysis Of Serrated Chip Formation In High-Speed Cuffing Auto Panel Dies

Predicting fatigue life of Solder joint with submodel method for a BGA package

Internal Bump Cracking Risk Assessment for Flip Chip Ball Grid Array Package During Board Level Reliability Test Through Finite Element Analysis

Thermodynamic simulation and analysis of metal bumps in flip-chip micro-LED packaging

Investigation On Fbga Block Warpage By Finite Element Simulation

Numerical Simulation of Interfacial Delamination in Electronic Packaging

Development of Equivalent Material Properties of Microbump for Simulating Chip Stacking Packaging

Theoretical and Experimental Investigation of Warpage Evolution of Flip Chip Package on Packaging during Fabrication

Wafer Warpage Optimization Via Finite Element Analysis for a 3D Chiplet Package

A Full Chip Scale Numerical Simulation Method for Thermal Management of 3D IC

A Kernel-Based DFM Model for Process from Layout to Wafer

Overview of Finite-Element Analysis in Simulation of SiC Power Device Packaging

Finite element analysis of 2.5D packaging processes based on multi-physics field coupling for predicting the reliability of IC components

Analytical Multistage Thermal Model for FEOL Reliability Considering Self-and Mutual-Heating

Stress-induced warpage estimation of advanced semiconductor copper interconnect processes

Predictive Compact Modeling of Random Variations in FinFET Technology for 16/14nm Node and Beyond

Thermal Stress and Reliability Analysis of TSV-Based 3-D ICs with a Novel Adaptive Strategy Finite Element Method