Abstract:Effectively implementing safeguards in fuel reprocessing and fuel fabrication plants requires the extensive use of state-of-the-art instrumentation for accurate material characterization. The ability to rapidly and continuously determine the material balance in a large facility is essential to control and reduce the risk of diversion. Multiple detection technologies are implemented that provide the necessary Continuity of Knowledge (CoK) and inventory control required for effective safeguards. In a Pu/U-oxide (MOX) fuel processing facility, much of the detection technology is based on moderated 3He neutron detectors. Recent concerns with respect to the possible lack of sufficient quantities of 3He has resulted in the interest in developing alternative detection technologies for current and future needs and applications. To address this situation, we have begun a series of experiments at a MOX fuel fabrication facility to determine the performance and suitability of liquid scintillator neutron detectors. MOX fuel in the form of reactor fuel assembly fuel rods and large volume MOX powder containers typically found in such production facilities were measured. In addition, high-purity Germanium (HPGe) and cadmium zinc telluride (CZT) detectors will be included to determine their respective performance characteristics in a large and complex fuel production environment. The results of these experiments will be used for consideration in the development and deployment of new safeguards systems in large, complex facilities such as the Japan Mixed-Oxide Fuel Fabrication Facility (J-MOX) or the Rokkasho Reprocessing Plant (RRP). This paper will present and discuss the results of the first series of experiments, conducted at PPFF (Plutonium Fuel Development Center Plutonium Fuel Facility) of JAEA, as well as describe the next steps in this process.

Principle and Test Experience of the RIAR's Oxide Pyro-Process

Conceptual Study of Neutron Physics of Nuclear Fuel Cycle for Ceramic Fast Reactor

Particle emission from irradiated VVER-1200 fuel with Am burnable absorber

EBR-II MOX Fuel Characterization Enabling ARES Phase I Testing

Possible ways to solve the problems of using MOX fuel in thermal reactors

Hydrometallurgical and combined technologies fast reactor MNUP and MOX UNF reprocessing

Economic Evaluation on the Mox Fuel in the Closed Fuel Cycle

Evaluation of Metal Oxide Coated Stainless Steel As a Potential Anode for Pyroprocessing

Investigation of Plasma-Chemical Synthesis of Complex Oxide Compositions for Dispersed Uranium-Plutonium Mixed Fuel

Research on PUREX-TRPO integrated process

Development of a New Aqueous Process for Nuclear Fuel Reprocessing: Hot Tests on the Recovery of U and Pu from a Nitric Acid Solution of Spent LWR Fuel

Pyrochemical reprocessing of molten salt fast reactor fuel: focus on the reductive extraction step

International fuel performance study of fresh fuel experiments for PCMI effects during RIA experiments

ANALYSIS OF UO2-BEO FUEL PERFORMANCE DURING NORMAL CONDITIONS AND RIA

Feasibility study on reprocessing of HTGR spent fuel by existing PUREX plant and technology

On the Selection and Qualification of Fuel for the Start-Up Core of Allegro Gas-Cooled Fast Reactor

Investigating the possibility of using a mixture of thorium with different fissile materials as a fuel in TRISO particles for the PBMR-400 reactor

Feasibility Study on the Analysis of MOX Particle Behavior

Study of Minor Actinides Transmutation in PWR MOX fuel

Multiple Recycling Characteristics and Cost of MOX Fuel Using Weapons-Grade Plutonium in Commercial PWR

Gamma and neutron detector performance in a MOX fuel fabrication plant environment