Abstract:Fully ceramic microencapsulated (FCM) fuel is a promising ATF concept with extraordinary fission product inclusion capacity, excellent oxidation and corrosion resistance, and high thermal conductivity. The thermo-mechanical performances are of great significance when evaluating the safety and applicability of a nuclear fuel. In this study, a finite element method (FEM) model for FCM thermo-mechanical performances analysis was presented. The thermo-mechanical behaviors, coupled with irradiation behaviors (including irradiation-induced dimensional change (IIDC), heat generation, conduction, thermal expansion, creep, burnup, and gap/plenum pressure, etc.), were developed to investigate the thermal and mechanical characteristics of TRISO-based FCM Fuel. A simplified model of TRISO fuel particles was established and validated. After that, a full 3D modeling of FCM fuel pellet with typical packing fractions was realized by an optimized stochastic strategy. A numerical method was validated and successfully applied to realize the simulations of a FCM fuel pellet. Two different thermal boundaries, namely fixed particle power and fixed pellet power, were performed to investigate the irradiation behavior of FCM fuel. Moreover, the effects of burnup, particle spacing, no fuel zone width and other key parameters were well studied and investigated. The performed calculation showed that temperature and stress in matrix and TRISO are both positively correlated with the packing fraction. It's worth noting that compared with the cases of fixed particle power, cases of fixed pellet power may lead to higher fuel temperature and higher stress. The results also implied that from the perspective of probability evaluation, most of the TRISO particles in FCM fuel can maintain the structural integrity under different packing fractions, but some of the particles with higher stress may crack or damage, especially in the cases of high burnup and high packing fraction.

Coated Particle Fuel: Historical Perspectives and Current Progress

Current status and future development of coated fuel particles for high temperature gas-cooled reactors

A New Design of Composite Fuel with Zr-coated TRISO Particles Dispersed in Metal Matrix

Design and preparation of SiC based novel coated fuel particle

Preparation of the Coated Nuclear Fuel Particle Using the Fluidized Bed-chemical Vapor Deposition (FB-CVD) Method

Simulation on the Multidimensional Behavior of TRISO Particle Fuel with UN/ UO2 Kernel

Preparation and Performance of Fully Ceramic Fuel Element Using Silicon Carbide As Coating Layers

Comparative Study of Coated Particle Stresses with Different Coating Layer Performance

The Study of Irradiation-Induced Failure Behavior for the TRISO-coated Fuel Particle in HTGR

A Novel Coated-Particle Design and Fluidized-Bed Chemical Vapor Deposition Preparation Method for Fuel-Element Identification in a Nuclear Reactor

Options for Managing Spent TRi-structural ISOtropic Nuclear Fuel

Advancements in the Research of High-Temperature Gas-Cooled Reactor Fuel Via Additive Manufacturing Techniques

The Failure Mechanisms of HTR Coated Particle Fuel and Computer Code

Algorithms for TRISO Fuel Identification Based on X-ray CT Validated on Tungsten-Carbide Compacts

Research and Development on the First-loading Coated Fuel Particles for the 10 MW High Temperature Gas-cooled Reactor

Design and Fabrication of TRISO Based ZrC Fuel for Nuclear Thermal Propulsion

Investigation on Thermo-Mechanical Performance of Fully Ceramic Microencapsulated Fuel

Neutronic Design and Evaluation of a PWR Fuel Assembly with Accident Tolerant-Fully Ceramic Micro-Encapsulated (AT-FCM) Fuel

The Study on Pyrolytic Carbon Powder in the Coating Process of Fuel Particle for High-Temperature Gas-Cooled Reactor

Multidimensional Multiphysics Modeling of TRISO Particle Fuel with SiC/ZrC Coating Using Modified Fission Gas Release Model

Physics Evaluation of Alternative Uranium-Based Oxy-Carbide Annular Fuel Concepts for Potential Use in Compact High-Temperature Gas-Cooled Reactors