Abstract:The earthquake and tsunami on March 11, 2011 severely damaged the Fukushima Dai-ichi nuclear plant leading to the most severe nuclear incident since Chernobyl. Ongoing operations to cool the damaged reactors at the site have led to the generation of highly radioactive coolant water. This is currently mainly treated to remove Cs-137 and Cs-134 and passed through a reverse osmosis (RO) unit to reduce the salinity before being cycled back to the reactors. Because only the Cs isotopes are removed, the RO reject water still contains many radioactive isotopes and this has led to the accumulation of over 200,000 cubic meters (52 million gallons) of extremely contaminated water which is currently stored on site in tanks. EnergySolutions, in partnership with Toshiba, were contracted to develop a system to reduce 62 isotopes in this waste down to allowable levels. This was a significant technical challenge given the high background salt content of the wastewater, the variation in aqueous chemistry of the radioactive isotopes and the presence of non-active competing ions (e.g. Ca and Mg) which inhibit the removal of isotopes such as Sr-89 and Sr-90. Extensive testing was performed to design a suitable system that could meet the required decontamination goals. more » These tests were performed over a 6 month period at facilities available in the nearby Fukushima Dai-ni laboratory using actual waste samples. This data was then utilized to design a Multi Radioactive Nuclides Removal System (MRRS) for Fukushima which is a modified version of EnergySolutions' proprietary Advanced Liquid Processing System (ALPS)'. The stored tank waste is fed into a preliminary precipitation system where iron flocculation is performed to remove a number of isotopes, including Sb-125, Ru-106, Mn-54 and Co-60. The supernatant is then fed into a second precipitation tank where the pH is adjusted and the bulk of the Mg, Ca and Sr precipitated out as carbonates and hydroxides. After passing through a cross-flow ultrafiltration membrane, the permeate then goes through a total of 14 fixed ion exchange and adsorbent columns followed by a disposable polishing column to polish the residual isotopes down to allowable levels. At the end of the system, the effluent is filtered for a final time to removal any particulates that may have been picked up from the media columns and then stored prior to analysis. (authors) « less

Conceptual Design Study on Advanced Aqueous Reprocessing System for Fast Reactor Fuel Cycle

Conceptual Study of Neutron Physics of Nuclear Fuel Cycle for Ceramic Fast Reactor

Development of a New Aqueous Process for Nuclear Fuel Reprocessing: Hot Tests on the Recovery of U and Pu from a Nitric Acid Solution of Spent LWR Fuel

Development of an Advanced Ion Exchange Process for Reprocessing Spent Nuclear Fuels

Feasibility study on reprocessing of HTGR spent fuel by existing PUREX plant and technology

Demand driven salt clean-up in a molten salt fast reactor - Defining a priority list

Application of fluoride volatility method to the spent fuel reprocessing

Progress and Discussion on Chemical Separation Technologies for Nuclear Fuel Reprocessing Developed Abroad

Application of supercritical fluid extraction in reprocessing of spent nuclear fuel

Research on PUREX-TRPO integrated process

New Standards in Liquid Waste Treatment at Fukushima Dai-ichi - 13134

Group Partitioning of Minor Actinides and Rare Earths from Highly Active Liquid Waste by Extraction Chromatography Utilizing Two Macroporous Silica-Based Impregnated Polymeric Composites

Americium Recovery from Highly Active PUREX Raffinate by Solvent Extraction: The EXAm Process. A Review of 10 Years of R&D

Flexibility of ADS for Minor Actinides Transmutation in Different Two-Stage PWR-ADS Fuel Cycle Scenarios

Technology for Reprocessing Mother–Wash Solution after Crystallization Purification of Spent Nuclear Fuel from High Temperature Gas-Cooled Reactor

Experimental testing and process simulation of flowsheets for the co-separation of uranium and plutonium using acetohydroxamic acid as a complexing agent

HYDROXYLAMINE DERIVATIVE IN PUREX PROCESS. VI. STUDY ON THE PARTITION OF URANIUM/NEPTUNIUM AND URANIUM/PLUTONIUM WITH N,N-DIETHYLHYDROXYLAMINE IN THE PURIFICATION CYCLE OF URANIUM CONTACTOR

An overview of solvent extraction processes developed in Europe for advanced nuclear fuel recycling, part 1 — heterogeneous recycling

THE DEVELOPMENT OF THE LIQUID CHROMATOGRAPHY PROCESS FOR THE SPENT NUCLEAR FUEL REPROCESSING TECHNOLOGY

Application and Spent-Fuel Reprocessing of Solution Reactor

Co-processing of uranium and plutonium for sodium-cooled fast reactor fuel reprocessing by acid split method for plutonium partitioning without reductant