Abstract:In the pre-Chernobyl period, the task of fast reactors was to provide fuel for the intensive development of nuclear energy with a deficit of natural uranium: short doubling time, high HF, high heat intensity, short campaign. After the Chernobyl accident, the main thing was to ensure safety, including in beyond design basis and postulated accidents. Modern fast sodium reactors must, on the one hand, satisfy the safety requirements in design and beyond design basis accidents (in accordance with the requirements of GEN-IV), and on the other, be competitive in comparison with water reactors and other energy sources. The article discusses the methods of transformation of the core of existing and planned Russian fast reactors to meet these requirements. The safety of these reactors in design and beyond design basis accidents is ensured by rejecting the upper end shield and replacing it with a sodium cavity, which allows reducing the NER and ensuring the input of negative reactivity when sodium boils. Such an core is implemented in BN-800 and the designed BN-1200. Improving the competitiveness (increasing the duration of the fuel campaign and KIUM) of the designed and existing reactors is ensured by switching to radiation-resistant clad steel EK164 (currently sold in BN-600, planned in BN-800) and the transition to the core with an axial layer of depleted uranium dioxide (planned for BN-800 and BN-1200). In BN-1200, due to the abandonment of a number of switchgear elements and optimization of the design, a one-and-a-half reduction in metal consumption is achieved. For fuel economy, a ′′thick′′ fuel rod with a diameter of 9.3 mm and a fuel campaign of 4 years have been adopted. This reduces the annual consumption of fuel rods and fuel assemblies by 2-2.5 times. Both events require modernization of the core. Each of these events allows you to increase the duration of the campaign by 25 %, and the implementation of both measures (transition to new steel and the introduction of a layer) will allow you to increase the campaign and reduce fuel consumption by more than 50 %. The introduction of the axial layer does not require core expansion, which gives additional fuel savings. But the axial layer should not be located in the central plane of the core, but with a shift of 3-5 cm downward. This will improve many characteristics of the core: increase fuel enrichment by a quarter and, as a result, proportionally reduce the neutron flux and radiation damage to the claddings of fuel elements; increase the fuel campaign to 5 years; to reduce the reactivity margin for burnout, without compromising the effectiveness of the control systems, to increase the micro-campaign to 1 year; to level the heat-release field in the vertical direction, to reduce the maximum heat intensity; to improve the course of beyond design basis accidents like ULOF. This method of reducing the rate of accumulation of a damaging dose is equally effective for both MOX and nitride fuels, which makes it possible to unify the core design.

A safety enhanced sodium-cooled MOX fueled fast reactor core concept

Development of Safety-Enhanced Fast Reactor by Using Minor Actinide Bearing Internal Blanket

DEVELOPMENT OF A PASSIVE REACTOR SHUTDOWN DEVICE TO PREVENT CORE DISRUPTIVE ACCIDENTS IN FAST REACTORS:

Self-sustaining Core Design for 200 MWe Molten-Salt Reactor with Thorium-Uranium Fuel :FUJI-U3-(0)

Conceptual Design and Feasibility Analysis of a Modular Supercritical CO2 Fast Reactor Core

Maintenance Oriented Tokamak Reactor With Low Activation Material And High Aspect Ratio Configuration

FEATURES OF THE CORE OF PERSPECTIVE FAST REACTORS

Preliminary Core Design of the Long Life S-CO2 Cooled Fast Reactor With 300WMth

Comparison and sensitivity analysis of the core characteristics of a sodium-cooled fast breeder reactor with 750 MWe output evaluated by JENDL-4.0 and ADJ2000R

Core design of long‐cycle small modular lead‐cooled fast reactor

Practical Design of a Breed-and-Burn Lead-Cooled Fast Reactor with Rotational Fuel Shuffling Strategy

Improved Tokamak Concept Focusing On Easy Maintenance

Experiments on Criticality and Reactivity Worths in the FCA-XXII-1 Assembly Simulating Highly Enriched MOX Fueled Tight Lattice LWR Cores

A novel approach on designing ultrahigh burnup metallic TWR fuels: Upsetting the current technological limits

Conceptual design and safety characteristics of a new multi-mission high flux research reactor

Flattening of Fast Neutron Flux Distribution in Molten Salt Reactor for Longer Graphite Moderator Lifetime

Neutronic Evaluation of LWR Based SMR with TRU Fuel and Comparison with Different Core Configuration of UO2 and MOX Fuel

Design and safety features of SALUS-100: A long fuel-cycled Sodium-cooled fast reactor

Enhancing fuel breed-burn performance in a sodium-cooled fast reactor using a novel reactivity control method

Minor Actinides Transmutation in a Molten Salt Blanket in the Fusion-Fission Hybrid Reactor Core

Fast breeder reactor core concept for heterogeneous minor actinide loading