Abstract:The molten chloride salt fast reactor (MCFR) with a closed Th-U fuel cycle is receiving more and more attention due to its excellent performance, such as high solubility of actinides, superior breeding capacity, and good inherent safety. In this work, the neutronics performances for different minor actinides (MA) loadings and operation modes are analyzed and discussed based on an optimized MCFR. The results indicate that online continuous reprocessing can significantly increase the transmutation performance of MAs. In addition, MA loadings have an obvious effect on the neutronics characteristics of the MCFR, and it is helpful for improving the MA transmutation capability and 233U breeding performance, simultaneously. When MA = 5 mol%, the average annual MA transmutation mass and incineration mass can achieve about 53 kg and 13 kg, respectively, and the corresponding annual net production of 233U is 250 kg. When MA = 33.5 mol%, the annual MA transmutation mass and incineration mass can be about 310 kg and 77 kg, respectively, and the corresponding annual net production of 233U is 349 kg. However, when the MA loadings exceed 10%, the corresponding keff will exceed 1.1 for decades, even if only Th is continuously fed online. The results also indicate that the transmutation ratio (TR) and incineration ratio (IR) of MA increase and reach maximum values in the first decades for all the different MA loadings, which means MA may be fed into the fuel salt to improve its transmutation capability. Moreover, though MA loading will increase the level of radiotoxicity of the core in the early stage of burnup, the radiotoxicity of MA will drop rapidly after a brief rise during the operation. It can also be found that the temperature coefficient of reactivity (TCR) of all different MA loadings can be negative enough to maintain the safety of the MCFR during the whole operation, although it decreases in the beginning of life (BOL) with the increasing MA loading. Furthermore, the evolution of an effective delayed neutron fraction (EDNF) is also researched and discussed, and the EDNF varies most significantly when loading MA = 35.5 mol%, with a range of 273 to 310 pcm over the entire 100 years of operation.

Minor Actinides Transmutation in a Molten Salt Blanket in the Fusion-Fission Hybrid Reactor Core

Study of Thorium–uranium Based Molten Salt Blanket in a Fusion–fission Hybrid Reactor

Minor Actinides Transmutation Performance in a Closed Th-U Cycle Based on Molten Chloride Salt Fast Reactor

Study On Neutronics And Fuel Cycle Of Fusion-Fission Hybrid Reactor

Scoping Studies for a Lead-Lithium-Cooled, Minor-Actinide-Burning, Fission-Fusion Hybrid Reactor Design

Studies on Flibe Blanket Designs in Helical Reactor FFHR

MA Heterogeneous Transmutation in Large Sodium Cooled Fast Reactor As IMF Fueled Target Subassembly

Fusion Driven Transmutation of Transuranics in a Molten Salt

Minor Actinides Transmutation in Candidate Accident Tolerant Fuel-Claddings U3Si2-FeCrAl and U3Si2-SiC

Neutronic Study of a Combined Fast Fission FFHR and Thermal Fission FFHR System Using Thorium Bearing Molten Salt Fuel

Neutronic Analysis of a Thorium-Uranium Fueled Water Cooled Fusion-Fission Hybrid Blanket

Study of minor actinides transmutation in a lead cooled fast reactor

Transmutation Study of Minor Actinides in Mixed Oxide Fueled Typical Pressurized Water Reactor Assembly

Study of Minor Actinides Transmutation in PWR MOX fuel

RFP-MSR Hybrid Reactor Model for Tritium Breeding and Actinides Transmutation †

Burn Up Study of an Innovative Natural Uranium-Thorium Fueled Reprocessing Free Fusion-Fission Hybrid Reactor Blanket with Closed Thorium-Uranium Fuel Cycle

Tritium Breeder Layer Evaluation of Fusion-Fission Hybrid System

Neutronics Design Optimization on Cross Cooled Solid Blanket of Fusion Reactor

Core and blanket thermal–hydraulic analysis of a molten salt fast reactor based on coupling of OpenMC and OpenFOAM

Development of Safety-Enhanced Fast Reactor by Using Minor Actinide Bearing Internal Blanket

MA Transmutation Performance Simulation and Accompanied Burning-up Analysis for C-ADS