Abstract:Imprint lithography is an effective and well-known technique for replication of nano-scale features. Nanoimprint lithography (NIL) manufacturing equipment utilizes a patterning technology that involves the field-by-field deposition and exposure of a low viscosity resist deposited by jetting technology onto the substrate. The patterned mask is lowered into the fluid which then quickly flows into the relief patterns in the mask by capillary action. Following this filling step, the resist is crosslinked under UV radiation, and then the mask is removed, leaving a patterned resist on the substrate. The technology faithfully reproduces patterns with a higher resolution and greater uniformity compared to those produced by photolithography equipment. Additionally, as this technology does not require an array of wide-diameter lenses and the expensive light sources necessary for advanced photolithography equipment, NIL equipment achieves a simpler, more compact design, allowing for multiple units to be clustered together for increased productivity. Previous studies have demonstrated NIL resolution better than 10nm, making the technology suitable for the printing of several generations of critical memory levels with a single mask. In addition, resist is applied only where necessary, thereby eliminating material waste. Given that there are no complicated optics in the imprint system, the reduction in the cost of the tool, when combined with simple single level processing and zero waste leads to a cost model that is very compelling for semiconductor memory applications. Any new lithographic technology to be introduced into manufacturing must deliver either a performance advantage or a cost advantage. Key technical attributes include alignment, overlay and throughput. In previous papers, overlay and throughput results have been reported on test wafers. In this work, we review progress on pattern capability, throughput, mask life and overlay. To minimize distortion and improve overlay, a Drop Pattern Compensation (DPC) method has been implemented to minimize the added overlay distortion terms. In this paper we describe the origins of the out of plane errors, and describe the method used to correct these errors along with some examples. Improvements to both cross matched machine overlay (XMMO) and imprint mix and match overlay (IMMO) are presented.

Enhanced Lithographic Imaging Layer Meets Semiconductor Manufacturing Specification a Decade Early

Ultra-high Precision Nano Additive Manufacturing of Metal Oxide Semiconductors Via Multi-Photon Lithography

Imprint Lithography with 25-Nanometer Resolution

Three-dimensional nanolithography guided by DNA modular epitaxy

Design Rule of Thick-Resist Lithography for Sidewall Perpendicularity and Critical Dimension Fidelity

From Computational Lithography to Computational Inspection: Inverse Lithography Technology (ILT) and Inverse Inspection Technology (IIT)

Approaching Angstrom-Scale Resolution in Lithography Using Low-Molecular-Mass Resists (<500 Da)

Enlightening 2D semiconductor inks

Automated Lithography Resolution Enhancement with Deep Learning Enabled Layout Modification During Physical Design Stage

Nanoscale Bilayer Mechanical Lithography Using Water as Developer

Full-Ic Manufacturability Check Based on Dense Silicon Imaging

Sustainable Lithography Paradigm Enabled by Mechanically Peelable Resists

Patterning, mask life, throughput and overlay improvements for high volume semiconductor manufacturing using nanoimprint lithography

Sub 20 nm Silicon Patterning and Metal Lift-Off Using Thermal Scanning Probe Lithography

A novel hardmask-to-substrate pattern transfer method for creating 3D, multi-level, hierarchical, high aspect-ratio structures for applications in microfluidics and cooling technologies

Low-temperature plasma etching of high aspect-ratio densely packed 15 to sub-10 nm silicon features derived from PS-PDMS block copolymer patterns

Unconventional Lithography for Patterned Nanomaterials

Combining thermal scanning probe lithography and dry etching for grayscale nanopattern amplification

A route to engineered high aspect-ratio silicon nanostructures through regenerative secondary mask lithography

UV-assisted nanoimprint lithography: the impact of the loading effect in silicon on nanoscale patterns of metalens

How Lithography and Metrology Are Enabling Yield in the Next Generation of Semiconductor Patterning