New Trends in Hydroprocessing Spent Catalysts Utilization

Hoda S.,Mohammed F.

DOI: https://doi.org/10.5772/38595

2012-03-28

Abstract:New Trends in Hydroprocessing Spent Catalysts Utilization | InTechOpen, Published on: 2012-03-28. Authors: Hoda S. Ahmed and Mohammed F. Menoufy

What problem does this paper attempt to address?

Options and processes for spent catalyst handling and utilization

M Marafi,A Stanislaus

DOI: https://doi.org/10.1016/s0304-3894(03)00145-6

2003-07-18

Abstract:The quantity of spent hydroprocessing catalysts discarded as solid wastes in the petroleum refining industries has increased remarkably in recent years due to a rapid growth in the hydroprocessing capacity to meet the rising demand for low-sulfur fuels. Due to their toxic nature, spent hydroprocessing catalysts have been branded as hazardous wastes, and the refiners are experiencing pressure from environmental authorities to handle them safely. Several alternative methods such as reclamation of metals, rejuvenation and reuse, disposal in landfills and preparation of useful materials using spent catalysts as raw materials are available to deal with the spent catalyst problem. The technical feasibility as well as the environmental and economic aspects of these options are reviewed. In addition, details of two bench-scale processes, one for rejuvenation of spent hydroprocessing catalysts, and the other for producing non-leachable synthetic aggregate materials that were developed in this laboratory, are presented in this paper.
The Enhancement on the Waste Management of Spent Hydrotreating Catalysts for Residue Oil by a Hydrothermal–hydrocyclone Process

Jian-Ping Li,Xue-Jing Yang,Liang Ma,Qiang Yang,Yan-Hong Zhang,Zhi-Shan Bai,Xiang-Chen Fang,Li-Quan Li,Yue Gao,Hua-Lin Wang

DOI: https://doi.org/10.1016/j.cattod.2015.08.037

IF: 5.3

2016-01-01

Catalysis Today

Abstract:Nowadays, the disposal of spent catalysts caused growing concerns on the environmental status, human health and industrial safety. The non-regenerable catalysts were either sent to metal reclaimers or disposed of in commercial landfills. The de-oiling and the following mechanical (hydraulic) separation are essential operations, which will minimize the amount of the spent catalysts as well as control the toxic substances deposited on the used catalysts. In the present study, a hydrothermal-hydrocyclone process was proposed to enhance the management of the waste catalyst for residue oil hydro-treating. Under the optimal conditions, the removal efficiencies of the contaminated hydrocarbons for the artificial and real system were 93.5% and 70.3%, respectively.The enhancement of de-oil was originated from the self-rotation behavior of the catalyst particles. The rotation speed was estimated to be similar to 6870 rad/min by using the high-speed digital imaging and the numeric calculation. The application of hydrocyclone and the design process can also be used for the treatment of other solid wastes including contaminated soil, oily sludge and so forth. Moreover, it indicated that on the basis of the throughout understanding on the flow characteristics, the traditional operational equipment could be well manipulated in the treatment of environmental pollution. (C) 2015 Elsevier B.V. All rights reserved.
Recovery technology of spent hydrogenation catalysts -A review

Lijuan Zhao,Xiaoguang Zhang,Zhe Tan,Guosai Jiang,Yousheng Chen,De'an Pan

DOI: https://doi.org/10.1016/j.scitotenv.2024.176127

2024-11-25

Abstract:Spent hydrogenation catalysts (HDCs) contain many Mo, V, Co, Ni, and Al2O3 carriers, which are valuable secondary resources. However, improper disposal can also lead to environmental pollution risks. In the past decade, research reviews on the recovery of valuable metals from spent HDCs have been somewhat reported, mainly summarizing basic technical processes. Based on previous work, this article reviews the emerging recycling technologies of spent HDCs in recent years. The research trend of furnace optimization in the pyrometallurgical process was innovatively proposed, and the importance of developing new mild leaching agents for the high-quality recycling of Al2O3 carriers in the hydrometallurgical process was clarified.
On the Use of Acid-Base-Supported Catalysts for Hydroprocessing of Heavy Petroleum

Carolina Leyva,Mohan S. Rana,Fernando Trejo,Jorge Ancheyta

DOI: https://doi.org/10.1021/ie070128q

2007-08-18

Abstract:The environmental regulation pressure is being increased to reduce precursors of pollution contaminants (sulfur, nitrogen, and aromatics) in fuels to lower levels. There are various processes to upgrade heavy and extra-heavy crude oils, such as solvent deasphalting, thermal conversion, catalytic conversion, distillation, and hydroprocessing. Hydroprocessing not only upgrades the crude oil but also produces synthetic crude oil that has a lower impurities content and a higher liquid yield of products. The fuels upgrading currently is achieved in refinery hydroprocessing units using different new-generation catalysts, along with several modifications of process conditions such as multistage reactors, type of catalyst loading, and reactor internals. However, it has been widely recognized that, for deep removal of these contaminants by hydroprocessing, research must be more oriented to the catalyst developments, rather than the process conditions. Actual commercial catalysts are based on well-known and studied active metals (CoMo, NiMo) and support (Al2O3). In addition, extensive research work has been performed with other supports (Al2O3−TiO2, Al2O3−ZrO2, etc.). Nevertheless, other promising acidic materials, such as zeolites, have received relatively less attention, and experimental reports on their use as part of the heavy oil hydroprocessing catalyst support are scarce in the literature. The objective of this contribution is then to discuss the use of acidic and/or basic materials as a support for the hydroprocessing catalyst, specifically for their possible application for the hydroprocessing of heavy oils, in cases where the desired product selectivity is toward gasoline and middle distillates.

engineering, chemical
Recovery and value-added utilization of critical metals from spent catalysts for new energy industry

Jiawei Wen,Xueli Wang,Fengshan Yu,Maolin Tian,Chunxia Wang,Guoyong Huang,Shengming Xu

DOI: https://doi.org/10.1016/j.jclepro.2023.138295

IF: 11.1

2023-08-07

Journal of Cleaner Production

Abstract:With the rapid increase of new energy industry, the shortage of critical metals for new energy industry, such as Ni, Co, V, and Pt, has received global attention. The hazardous spent catalysts from traditional energy industry contain a series of critical metals, which should be safe disposal and even value-added utilized. However, the recovery of critical metals from these valuable wastes has not been well accepted. In this review, the characteristics and recycling necessity of spent catalysts are described in the start section, and then the current progress on stepwise recycling techniques of three typical spent catalysts are summarized, which are petroleum refining hydrogenation catalysts, platinum group metals catalysts and selective catalytic reduction catalysts. The regeneration and value-added utilization examples of these catalysts have been discussed and prospected. An overview of the advantage and disadvantage features of these techniques is presented, associating with the environmental assessment. At the end of the paper, the evolutions of metal elements and species of the recycling process are emphasized for rational designs and considerations from the mechanism of molecular level. The further perspective on the more practical value-added utilization is highlighted. This review set up a closed-loop conversion bridge from traditional energy wastes to new energy materials.

environmental sciences,green & sustainable science & technology,engineering, environmental
Cyclonic Gas Stripping Deoiling and Gas Flow Acceleration Classification for the Resource Utilization of Spent Catalysts in Residue Hydrotreating Process

Peng-Bo Fu,Hua-Lin Wang,Jian-Ping Li,Yuan Huang,Yi-Lin Fang,Wei Yuan,Xiang-Chen Fang,Li-Quan Li,Zhao-Hui Huang,Lai Jiang

DOI: https://doi.org/10.1016/j.jclepro.2018.04.203

IF: 11.1

2018-01-01

Journal of Cleaner Production

Abstract:The resource utilization of spent catalysts is one of the keys to enabling ebullated bed hydrotreating technology to be environmentally friendly, resource-saving and process sustainable. Spent residue hydrotreating catalysts contain a large amount of oil and highly active catalysts, if cannot be efficiently recycled will lead to waste of resources and huge catalyst consumption. In this study, the novel cyclonic gas stripping was first developed to spent catalysts deoiling, in which the removal of oil filled in the catalyst nanopores was enhanced by particle high speed self-rotation. Meanwhile, gas flow acceleration classification was developed for catalyst activity classification according to the particle density differences. This technology was successfully applied to the SINOPEC's first set of ebullated bed residue hydrotreating industrial demonstration unit, the total oil content of spent catalysts can reduce to 1.7% from 31.8%, with the deoiling efficiency reaching 96.7%. Moreover, 30% of the catalysts after deoiling were classified as highly active catalysts with lower particle density and higher pore volume. The successful implementation of this technology can reduce 25% of fresh catalyst consumption and 52% of hazardous waste discharge in residue hydrotreating process. This technique also can be extended to the resource utilization of spent catalysts in other petrochemical production.
A Green and Efficient Strategy to Utilize Spent SCR Catalyst Carriers: in Situ Remediation of Cu@TiO2 for Photocatalytic Hydrogen Evolution

Zhuo Wang,Ling Ma,Bingzhang Chen,Yubo Zhang,Kai Hong Wong,Wei Zhao,Chunxia Wang,Guoyong Huang,Shengming Xu

DOI: https://doi.org/10.1039/d4gc04806g

IF: 9.8

2024-01-01

Green Chemistry

Abstract:A short process for in situ remediation of TiO2 carriers in spent SCR catalysts was developed to fabricate highly active copper-doped photocatalysts (CR-TiO2) for photocatalytic hydrogen production in an economical and environment friendly way.
Sustainable recovery of surface-deposited oils and valuable metals from uncrushed spent hydroprocessing catalysts

Chunlv Feng,Cheng Zhang,Shenghua Yuan,Mei Liu,Rongrong Chen,Huiping Hu,Jiugang Hu

DOI: https://doi.org/10.1016/j.jclepro.2022.130564

IF: 11.1

2022-03-01

Journal of Cleaner Production

Abstract:The spent hydroprocessing (HDP) catalysts containing a considerable quantity of oily pollutants and valuable metals including nickel (Ni), molybdenum (Mo), and vanadium (V) are hazardous wastes to be treated urgently. Herein, a sustainable process featuring vacuum pyrolysis and fast acidic elution was proposed to recycling the residual oils and metal values from the uncrushed spent HDP catalysts. The removal efficiency of oils by vacuum pyrolysis reached more than 85% at 400 °C in 60 min. The Ni, Mo, and V deposited on the uncrushed catalysts were fast eluted and recovered by 1 mol/L sulfuric acid solution within 15 min. The ultrasound-assisted leaching could promote metal recovery within 10 min but then has no difference with stirring leaching. The leaching efficiencies of Ni, Mo, and V reached over 95% with few Al being dissolved (7.63%). The obtained uncrushed Al2O3 residue could be potentially recycled as the support for a fresh catalyst. The liquid film diffusion control mechanism was disclosed to represent the fast leaching process of metal values. These results provided a promising and green approach for the sustainable recovery of both residual oils and valuable metals from spent hydroprocessing catalysts.

environmental sciences,green & sustainable science & technology,engineering, environmental
Development and Commercial Application of High Efficiency Catalysts for Resid Hydrotreating

YANG Qinghe,HU Dawei,DAI Lishun,NIE Hong,LI Dadong

DOI: https://doi.org/10.3969/j.issn.1001-8719.2011.02.002

2011-01-01

Abstract:Based on long-term accumulated technology and customer demand,a series of high efficiency catalysts for resid hydrotreating were developed and commercialized.The commercial results demonstrated that the new catalysts possessed higher activity and selectivity for HDS,HDM and HDCCR as well as high asphaltene and resin conversion,and high hydrogen content in hydrotreated resid.The activity and stability of new catalysts were much higher than that of reference catalysts.At the same time,due to the decrease of production cost,new catalysts were more competitive in market.
Innovative and Practical Trends in the Photocatalytic Degradation of Environmental Pollutants

Mohamed Ateia,Matthew S. Johnson,Bożena Czech

DOI: https://doi.org/10.3390/catal14020125

IF: 3.9

2024-02-06

Catalysts

Abstract:This Catalysts Special Issue explores cutting-edge research in the field of photocatalysis, offering a glimpse into the evolving landscape of environmental science and catalysis [...]

chemistry, physical
Catalysis in Ultra-Clean Fuels Production

N Tsubaki,UT Turaga,CS Song,M Misono

DOI: https://doi.org/10.1016/j.cattod.2005.03.024

IF: 5.3

2005-01-01

Catalysis Today

Abstract:The diminishing quality of oil feedstocks coupled with increasingly more stringent environmental regulations limiting the content of sulfur in transportation fuels have given rise to a need for improved hydroprocessing technology. This review begins with a summary of the major improvements in hydrodesulfurization (HDS) and hydrodenitrogenation (HDN) catalysts and processes that have been reported in recent years. It then describes a new class of hydroprocessing catalysts, the transition metal phosphides, which have emerged as a promising group of high-activity, stable catalysts. The phosphides have physical properties resembling ceramics, so are strong and hard, yet retain electronic and magnetic properties similar to metals. Their crystal structures are based on trigonal prisms, yet they do not form layered structures like the sulfides. They display excellent performance in HDS and HDN, with the most active phosphide, Ni2P, having activity surpassing that of promoted sulfides on the basis of sites titrated by chemisorption (CO for the phosphides, O2 for the sulfides). In the HDS of difficult heteroaromatics like 4,6-dimethyldibenzothiophene Ni2P operates by the hydrogenation pathway, while in the HDN of substituted nitrogen compounds like 2-methylpiperidine it carries out nucleophilic substitution. The active sites for hydrogenation in Ni2P have a square pyramidal geometry, while those for direct hydrodesulfurization have a tetrahedral geometry. Overall, Ni2P is a promising catalyst for deep HDS in the presence of nitrogen and aromatic compounds.
Oil Removal of Spent Hydrotreating Catalyst Como/Al2o3 Via A Facile Method with Enhanced Metal Recovery

Yue Yang,Shengming Xu,Zhen Li,Jianlong Wang,Zhongwei Zhao,Zhenghe Xu

DOI: https://doi.org/10.1016/j.jhazmat.2016.07.064

IF: 13.6

2016-01-01

Journal of Hazardous Materials

Abstract:Deoiling process is a key issue for recovering metal values from spent hydrotreating catalysts. The oils can be removed with organic solvents, but the industrialized application of this method is greatly hampered by the high cost and complex processes. Despite the roasting method is simple and low-cost, it generates hardest-to-recycle impurities (CoMoO4 or NiMoO4) and enormous toxic gases. In this study, a novel and facile approach to remove oils from the spent hydrotreating catalysts is developed. Firstly, surface properties of spent catalysts are characterized to reveal the possibility of oil removal. And then, oils are removed with water solution under the conditions of 90°C, 0.1wt% SDS, 2.0wt% NaOH and 10ml/gL/S ratio for 4h. Finally, thermal treatment and leaching tests are carried out to further explore the advantages of oil removal. The results show that no hardest-to-recycle impurity CoMoO4 is found in XPS spectra of thermally treated samples after deoiling and molybdenum is leached completely with sodium carbonate solution. It means that the proposed deoiling method can not only remove oils simply and without enormous harmful gases generating, but also avoid the generation of detrimental impurity and promote recycling of valuable metals from spent hydrotreating catalysts.
Electrospun Pt-TiO2 nanofibers Doped with HPA for Catalytic Hydrodeoxygenation

Amos Taiswa,Randy L Maglinao,Jessica M Andriolo,Sandeep Kumar,Jack L Skinner

DOI: https://doi.org/10.1038/s41598-024-77103-4

2024-10-21

Abstract:Electrospinning is utilized to fabricate catalytic nanofiber scaffold for biocrude upgrading in hydrodeoxygenation (HDO) following computational studies suggesting the need for nano-catalysts for efficient HDO conversion and selectivity. Here, Pt-TiO2 nanofibers are fabricated through electrospinning, followed by wet impregnation with a heteropoly acid (HPA), tungstosilicic acid. Intensive heat treatments were incorporated during and after processes to obtain a HPA doped Pt-TiO2 nano-catalyst. Catalytic HDO was performed in a batch reactor with phenol as the raw biocrude dissolved in hexadecane. The HPA doped Pt-TiO2 catalyst demonstrated promising HDO performance of 37.2% conversion and a 78.9% selectivity to oxygen free benzene and the remainder 21.1% as diphenyl ester as a result of esterification by acidic components of the catalyst. Additionally, BET surface area characterization show a low surface area 16.9 m2 g-1 significantly lower than existing commercial catalysts and a mesoporous nature suitable for selectivity. The presence of HPA on the anatase nanofiber compensated for low platinum nanoparticles crystallinity on the nanofibers. This work might create needed alternatives for preparing HDO catalysts for efficient aromatics production.
Developments and Applications of Diesel Hydrofining Catalysts

Xu Tong,Li Xiongnan,Wang Haiyan,Liu Guangnan

DOI: https://doi.org/10.3969/j.issn.1009-8348.2008.05.012

2008-01-01

Abstract:The latest advances in the carriers,metal active components of diesel hydrotreating catalysts were reviewed.The applications of complex support in hydrotreating were introduced,and the hydrodesulfurization, hydrodenitrogenation and hydrodearomatization reactions on hydrofining catalysts were presented.
Valorization of spent double substituted Co–Ni–Zn–Fe LDH wastewater nanoadsorbent as methanol electro-oxidation catalyst

Rehab Mahmoud,Hamdy F. M. Mohamed,Sarah H. M. Hafez,Yasser M. Gadelhak,E. E. Abdel-Hady

DOI: https://doi.org/10.1038/s41598-022-23798-2

IF: 17.694

2022-11-12

NanoScience and Technology

Abstract:Finding suitable non-expensive electrocatalyst materials for methanol oxidation is a significant challenge. Waste valorization of spent wastewater nanoadsorbents is a promising route toward achieving circular economy guidelines. In this study, the residual of layered double hydroxide (LDH) can be used as an electrocatalyst in direct methanol fuel cells as a novel approach. The Co–Ni–Zn–Fe LDH was prepared by the co-precipitation method followed by the adsorption of methyl orange (MO). Moreover, the spent adsorbent was calcined at different temperatures (200, 400, and 600 °C) to be converted to the corresponding mixed metal oxides (MMO). The prepared samples were characterized using XRD, FTIR, HRTEM, zeta potential, and hydrodynamic size measurements. The spent adsorbent was tested as an electro-catalyst for direct methanol electro-oxidation. The spent LDH/MO adsorbent showed a maximum current density of 6.66 mA/cm 2 at a 50 mV/s scan rate and a 1 M methanol concentration. The spent MMO/MO adsorbent showed a maximum current density of 8.40 mA/cm 2 at a 200 °C calcination temperature, 50 mV/s scan rate, and a 3 M methanol concentration. Both samples show reasonable stability over time, as indicated by the chronoamperometric response. Further nanoengineering of used nanoadsorbents could be a promising path to repurposing these wastes as electro-oxidation catalysts.
Hydrogen spillover in nonreducible oxides: Mechanism and catalytic utilization

Songhyun Lee,Hyungjun Kim,Ryong Ryoo,Jeong Young Park,Minkee Choi

DOI: https://doi.org/10.1007/s12274-022-4546-5

IF: 9.9

2022-06-17

Nano Research

Abstract:Hydrogen (H) spillover in nonreducible oxides such as zeolites and Al 2 O 3 has been a highly controversial phenomenon in heterogeneous catalysis. Since industrial catalysts are predominantly prepared using these materials as supports, it is important to understand the mechanism and catalytic functions of H spillover on their surfaces. In the past decade, fundamental studies on zeolite-encapsulated metal catalysts have revealed that H spillover and reverse spillover can be utilized in the design of hydrogenation and dehydrogenation catalysts with improved properties. Both experimental and theoretical studies have indicated that H spillover can occur in nonreducible oxides when they possess substantial acid sites that aid the surface migration of active H. In the present review, we will discuss the possible mechanisms of H spillover in nonreducible oxides and the unique opportunities of using this phenomenon for the design of advanced hydroprocessing catalysts.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
New Insights on Catalysts-Supported In-Situ Upgrading of Heavy Oil and Hydrogen Generation during In-Situ Combustion Oil Recovery

M. R. Fassihi,R. G. Moore,P. Pereira Almao,S. A. Mehta,M. G. Ursenbach,D. G. Mallory

DOI: https://doi.org/10.2118/215092-pa

2024-04-01

SPE Journal

Abstract:Summary As part of greenhouse gas reduction initiatives, there have been many publications on carbon sequestration, reducing the carbon footprint of oil and gas operations, and generating carbonless fuel [e.g., hydrogen (H2)] by means of in-situ processes. In-situ upgrading (ISU) can help with these aspects by converting bitumen and heavy oil into low sulfur, low N2, and low asphaltene products, generating fewer emissions and producing hydrogen as a byproduct, thus helping with utilization of vast resources of energy that would otherwise be wasted due to extreme measures of no fossil fuel policies. In addition, such processes could produce more valuable products, enhanced shipping/pipelining, and less demanding downstream processing. In this paper, we provide new insights into the results of several combustion tube tests that were performed for Alberta Ingenuity Centre for In Situ Energy, using different heavy oils with fresh supported catalysts. The catalysts were placed in the production end of the combustion tube so oil would pass over the catalyst bed before being produced. In practice, solid catalyst particles could be placed into the oil-bearing formation adjacent to the producing wellbore, ensuring that crude oil will flow over the catalysts during oil production. In this paper, we use many laboratory results that have never been published before. The objective is to understand whether using catalysts has merit in our future oil production activities under the current environmental restrictions. A commercial Ni/Mo catalyst was used in these tests. The results of these tests indicated at least temporary significant occurrence of reactions such as hydroprocessing (HP) and hydrotreating reactions, such as hydrocracking, hydrodesulfurization (HDS), hydrodenitrogenation (HDN), and hydrodeoxygenation. They also generated a significant volume of hydrogen in situ. We will discuss the impact of pressure, temperature, water injection, and dispersed vs. supported catalysts on the degree of oil upgrading. Also, the key parameters that could impact in-situ hydrogen generation will be presented. Specifically, the role of reactions such as aquathermolysis, thermal cracking, water-gas shift (WGS, defined later) reaction, and coke gasification will willbe discussed. Note that the products of these reactions could undergo additional methanation (ME) reactions, which could reduce the H2 concentration in the produced gas. Finally, methods of upscaling these results to the field conditions will be presented.

engineering, petroleum
Impact of Coprocessing Biocrude with Petroleum Stream on Hydrotreating Catalyst Stability

Cheng Zhu,Oliver Y. Gutiérrez,Daniel M. Santosa,Igor Kutnyakov,Roland Weindl,Hui Shi,Huamin Wang,Oliver Y. Gutiérrez

DOI: https://doi.org/10.1021/acs.energyfuels.2c01748

IF: 4.6541

2022-08-08

Energy & Fuels

Abstract:Coprocessing of biocrudes from hydrothermal liquefaction (HTL) of biomass and wastes with petroleum streams in refinery hydroprocessing has significant potential to accelerate the production of renewable transportation fuels in the near term. However, HTL biocrudes with some problematic characteristics can potentially cause faster deactivation of the catalysts, which is one of the biggest barriers to the adoption of biocrude in the current refinery process. In this work, we investigated the deactivation modes of a sulfide NiMo/Al2O3 hydrotreating catalyst used for coprocessing HTL biocrude (from wastewater sludge) with straight-run diesel. Spent catalysts were collected after coprocessing diesel with different biocrudes after >300 h time on stream and characterized by various techniques. Their catalytic activities were evaluated by model compound testing. Loss of catalyst activity was observed after coprocessing biocrudes. No structural change of the catalyst after coprocessing biocrudes was observed, and catalyst deactivation was largely due to catalyst fouling by carbonaceous species and metal contaminants (such as Fe and K) from biocrudes. Inorganic contaminant deposition leads to the external coating of the catalyst pellets on the top of the reactor, whereas the carbonaceous species potentially bind near the sulfide active phase, thereby blocking access to the active edge sites. Pretreatment of the HTL biocrude can reduce problematic species and alleviate catalyst deactivation during coprocessing.

energy & fuels,engineering, chemical
Hydrogen Spillover Effect in Electrocatalysis: Delving into the Mysteries of the Atomic Migration

Ashish Gaur,Jatin Sharma,HyukSu Han

DOI: https://doi.org/10.1002/eem2.12761

IF: 15

2024-05-17

Energy & Environmental Materials

Abstract:The phenomenon of hydrogen spillover effect (HSE) has acquired significant interest within the realm of electrocatalytic hydrogen evolution reactions (HER) in recent times. The concept of "hydrogen spillover" has introduced a novel approach to comprehending the dynamic behavior of atomic migration, namely the movement of hydrogen atoms on a catalyst surface. We diligently examined most of the articles published on the HSE and conducted a thorough analysis of the material fabrication aspect. Our focus has been solely on the chemical mechanism that enhances HER performance. Hydrogen spillover effect has recently garnered a lot of attention in the field of electrocatalytic hydrogen evolution reactions. A new avenue for understanding the dynamic behavior of atomic migration in which hydrogen atoms moving on a catalyst surface was opened up by the setup of the word "hydrogen spillover." However, there is currently a dearth of thorough knowledge regarding the hydrogen spillover effect. Currently, the advancement of sophisticated characterization procedures offers progressively useful information to enhance our grasp of the hydrogen spillover effect. The understanding of material fabrication for hydrogen spillover effect has erupted. Considering these factors, we made an effort to review most of the articles published on the hydrogen spillover effect and carefully analyzed the aspect of material fabrication. All of our attention has been directed toward the molecular pathway that leads to improve hydrogen evolution reactions performance. In addition, we have attempted to elucidate the spillover paths through the utilization of DFT calculations. Furthermore, we provide some preliminary research suggestions and highlight the opportunities and obstacles that are still to be confronted in this study area.

materials science, multidisciplinary
Recent Advancements in Two-Dimensional Layered Molybdenum and Tungsten Carbide-Based Materials for Efficient Hydrogen Evolution Reactions

K. Karuppasamy,A. Nichelson,Dhanasekaran Vikraman,Jun-Hyeok Choi,Sajjad Hussain,C. Ambika,Ranjith Bose,Akram Alfantazi,Hyun-Seok Kim

DOI: https://doi.org/10.3390/nano12213884

IF: 5.3

2022-11-03

Nanomaterials

Abstract:Green and renewable energy is the key to overcoming energy-related challenges such as fossil-fuel depletion and the worsening of environmental habituation. Among the different clean energy sources, hydrogen is considered the most impactful energy carrier and is touted as an alternate fuel for clean energy needs. Even though noble metal catalysts such as Pt, Pd, and Au exhibit excellent hydrogen evolution reaction (HER) activity in acid media, their earth abundance and capital costs are highly debatable. Hence, developing cost-effective, earth-abundant, and conductive electrocatalysts is crucial. In particular, various two-dimensional (2D) transition metal carbides and their compounds are gradually emerging as potential alternatives to noble metal-based catalysts. Owing to their improved hydrophilicity, good conductivity, and large surface areas, these 2D materials show superior stability and excellent catalytic performances during the HER process. This review article is a compilation of the different synthetic protocols, their impact, effects of doping on molybdenum and tungsten carbides and their derivatives, and their application in the HER process. The paper is more focused on the detailed strategies for improving the HER activity, highlights the limits of molybdenum and tungsten carbide-based electrocatalysts in electro-catalytic process, and elaborates on the future advancements expected in this field.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry

New Trends in Hydroprocessing Spent Catalysts Utilization

Options and processes for spent catalyst handling and utilization

The Enhancement on the Waste Management of Spent Hydrotreating Catalysts for Residue Oil by a Hydrothermal–hydrocyclone Process

Recovery technology of spent hydrogenation catalysts -A review

On the Use of Acid-Base-Supported Catalysts for Hydroprocessing of Heavy Petroleum

Recovery and value-added utilization of critical metals from spent catalysts for new energy industry

Cyclonic Gas Stripping Deoiling and Gas Flow Acceleration Classification for the Resource Utilization of Spent Catalysts in Residue Hydrotreating Process

A Green and Efficient Strategy to Utilize Spent SCR Catalyst Carriers: in Situ Remediation of Cu@TiO2 for Photocatalytic Hydrogen Evolution

Sustainable recovery of surface-deposited oils and valuable metals from uncrushed spent hydroprocessing catalysts

Development and Commercial Application of High Efficiency Catalysts for Resid Hydrotreating

Innovative and Practical Trends in the Photocatalytic Degradation of Environmental Pollutants

Catalysis in Ultra-Clean Fuels Production

Oil Removal of Spent Hydrotreating Catalyst Como/Al2o3 Via A Facile Method with Enhanced Metal Recovery

Electrospun Pt-TiO2 nanofibers Doped with HPA for Catalytic Hydrodeoxygenation

Developments and Applications of Diesel Hydrofining Catalysts

Valorization of spent double substituted Co–Ni–Zn–Fe LDH wastewater nanoadsorbent as methanol electro-oxidation catalyst

Hydrogen spillover in nonreducible oxides: Mechanism and catalytic utilization

New Insights on Catalysts-Supported In-Situ Upgrading of Heavy Oil and Hydrogen Generation during In-Situ Combustion Oil Recovery

Impact of Coprocessing Biocrude with Petroleum Stream on Hydrotreating Catalyst Stability

Hydrogen Spillover Effect in Electrocatalysis: Delving into the Mysteries of the Atomic Migration

Recent Advancements in Two-Dimensional Layered Molybdenum and Tungsten Carbide-Based Materials for Efficient Hydrogen Evolution Reactions