Abstract:Fluid catalytic cracking (FCC) is the workhorse of modern crude oil refinery. Its regenerator plays a critical role in optimizing the overall profitability by efficiently restoring the catalyst activity and enhancing the heat balance in the riser reactor. Improvement in the device metallurgy and process operations have enabled industrial regenerators to operate at high temperatures with a better coke burning rate and longer operating cycle. Today, the carbon content of regenerated catalyst has drastically reduced to less than 0.1 wt.%. However, the unit is still plagued with operational complexities and insufficient understanding of the underlying dynamic, multiscale intricacies. Recent process-intensification strategies provide insights into regenerator performance improvement potentials. In this review, the importance of the uniform distribution of spent catalysts through structural modification and operational manipulations of the catalyst distributor is discussed. The knowledge of the role of baffles in enhancing excellent gas–solid interaction has been increasing, but skepticism due to its complex hydrodynamic effects on gas–solid flows fends off operators from its application, a critical evaluation of its implication in the regenerators is covered. The understanding of the contribution of air/steam distributor design and feed gas injection techniques for even contact with spent catalyst leading to the improvement in FCC performance is also investigated. The reliability of FCC components is equally a big concern, as unplanned shutdown and enormous economic losses are being witnessed due to device failure. To this end, mitigation approaches to damaging afterburn and high-temperature erosion problems with respect to process control and geometric adjustment in the bed, freeboard, cyclone separators and collection ducts are explored. Emission limits for fluid catalytic cracking unit (FCCU) and products are consistently ratcheting downward; the commingled turnkey solutions to reducing pollutants generation are also reviewed.

A comprehensive review of catalyst deactivation and regeneration in heavy oil hydroprocessing

Deactivation and Regeneration of Raney-Ni Catalyst During Multiphase Dehydrogenation of Cyclohexane

Heterogeneous Catalyst Deactivation and Regeneration: A Review

Modern Techniques to Minimize Catalyst Deactivation Due to Coke Deposition in Catalytic Upgrading of Heavy Oil In Situ Processes

Deactivation and Regeneration of Zeolite Catalysts Used in Pyrolysis of Plastic Wastes—A Process and Analytical Review

Anti-deactivation of zeolite catalysts for residue fluid catalytic cracking

Upgrading of triglycerides, pyrolysis oil, and lignin over metal sulfide catalysts: A review on the reaction mechanism, kinetics, and catalyst deactivation

Consequences of catalyst deactivation for process design and operation

Understandings of Catalyst Deactivation and Regeneration during Biomass Tar Reforming: A Crucial Review

Impact of Coprocessing Biocrude with Petroleum Stream on Hydrotreating Catalyst Stability

State-of-the-Art Review of Fluid Catalytic Cracking (FCC) Catalyst Regeneration Intensification Technologies

Recent Advances in the Mitigation of the Catalyst Deactivation of CO2 Hydrogenation to Light Olefins

On the Use of Acid-Base-Supported Catalysts for Hydroprocessing of Heavy Petroleum

Carbon Deposit Analysis in Catalyst Deactivation, Regeneration, and Rejuvenation.

A Review on Deactivation and Regeneration of Catalysts for Dimethyl Ether Synthesis

Catalytic Applications in the Production of Hydrotreated Vegetable Oil (HVO) as a Renewable Fuel: A Review

Strategies for regeneration of Pt-alloy catalysts supported on silica for propane dehydrogenation

Recent progress in hydrotreating kinetics and modeling of heavy oil and residue: A review

A review of catalyst modifications for a highly active and stable hydrogen production from methane

Advanced design and development of catalysts in propane dehydrogenation

Progress of Catalysts for Deep Hydrodesulfurization of Fuels