Abstract:Taking inspiration from the characteristics and the limitations of flexible organic thin-film transistor (OTFT) devices, a novel surface modification method was proposed to modify the gate insulator to tune the mechanical compatibility and adhesion energy between gate insulator and semiconductor layer for high performance flexible OTFT devices. The surface modification method aimed to form a polymer network structure within the cross-linked polymer film by photo-polymerization of the liquid monomers which were infused into the cross-linked polymer film. The formation of double-network structure significantly improved the electrical performance of the flexible devices. The charge mobility increased from 0.17 cm2V−1s−1 to 1.52 cm2V−1s−1 and on/off current ratio increased by one or two orders of magnitude. During the bending tests, the devices modified with double-network dielectric structure exhibited excellent mechanical stability even after hundreds of successive bending cycles along with different bending radius. For instance, the mobility of the devices modified with methyl methacrylate only reduced by 2% after 500 successive bending cycles with a bending radius of 10 mm. It is ascribed to the improvement of mechanical compatibility and decrease of adhesion energy between gate insulator and semiconductor with the double network dielectric structure. More importantly, this work is a unique example to demonstrate the importance of mechanical compatibility and adhesion energy between gate insulator and semiconductor on the mechanical stability of flexible OTFT. Furthermore, these results clearly demonstrated that this method is a promising tool to tune the semiconductor/dielectric interface, especially the mechanical compatibility and adhesion energy between semiconductor layer and dielectric layer, which has great potential for high performance flexible OTFTs with excellent mechanical stability.

Gate Dielectric Leakage Reduction in Hard-Mask Defined and Dry-Etch Patterned Organic TFTs Devices

Eliminating Leakage Current in Thin‐Film Transistor of Solution‐Processed Organic Material Stack for Large‐Scale Low‐Power Integration

Abnormal Back Channel Leakage under Large Drain Voltage in Short Channel Organic Thin-Film Transistors

Top-Gate Dry-Etching Patterned Polymer Thin-Film Transistors with a Protective Layer on Top of the Channel

P-Type Thin Film Transistor-Like Effects in Organic Light-Emitting Diodes Array: the Origin of Lateral Leakage

Direct Patterning on Top-Gate Organic Thin-Film Transistors: Improvement of On/Off Ratio, Subthreshold Swing, and Uniformity

Reduction of Off-Current in Self-Aligned Double-Gate TFT with Mask-Free Symmetric LDD

Numerical Simulation and Analysis of the Switching Performance for Printable Low-Voltage Organic Thin-Film Transistors in Active-Matrix Backplanes

Solution-processable Organic and Hybrid Gate Dielectrics for Printed Electronics

Planar Nanoscale Architecture for Organic Thin-Film Field-Effect Transistors

Enabling Gate Dielectric Design for All Solution-Processed, High-Performance, Flexible Organic Thin-Film Transistors.

UV-directly Patternable Organic–inorganic Hybrid Composite Dielectrics for Organic Thin-Film Transistors

Low Voltage Organic Thin-Film Transistor with Reduced Sub-Gap Dos for Power Efficient Logic Circuits

Impact of Gate Coupling and Misalignment on Performance of Double-gate Organic Thin Film Transistors

Achieving low-voltage operating high-mobility organic thin-film transistors by a multi-layered gate dielectric

Enhancing the Electrical and Thermal Stability of Organic Thin-Film Transistors by Utilizing Fluorinated Polyimide and Silicon Dioxide Bilayer Gate Dielectric

Organic Thin-Film Transistors Having Inorganic/Organic Double Gate Insulators

Effect of the Degree of the Gate‐Dielectric Surface Roughness on the Performance of Bottom‐Gate Organic Thin‐Film Transistors

Interface engineering with double-network dielectric structure for flexible organic thin film transistors

Characterization and modeling of edge direct tunneling (EDT) leakage in ultrathin gate oxide MOSFETs

Bottom-Contact Organic Field-Effect Transistors Having Low-Dielectric Layer Under Source And Drain Electrodes