Abstract:Organic electronics have attracted intensive research interest in the past decades (Chen et al., 2020; Yao et al., 2020; Tang et al., 2021). The ever-increasing demand for organic electronics calls for the development of high-performance and high-stability organic thin-film transistors (OFETs). OFETs are considered key components to fabricate flexible and printable devices for promising applications, such as flexible displays, chemical sensors, wearable devices, and radio frequency identification (RFID) tags. The design and synthesis of novel structural materials (such as semiconductors, dielectrics, electrodes, and substrates), as well as the development of efficient interface engineering strategies, would further promote the development of flexible electronics and lay the foundation for their early commercialization (Ji et al., 2019; Ji et al., 2021). Despite remarkable progress in the development of new materials and relevant applications in organic electronics, some challenges remain, not only on the design and synthesis of novel structural materials (such as π-conjugated small molecule or polymer semiconductors, dielectrics, electrodes, and substrates), but also the development of efficient interface engineering strategies, for the fabrication of high-performance and high-stability devices, and eventually the realization of commercially available products. For example: 1) The need for new π-conjugated semiconductors (small molecule or polymer semiconductors) compatible with polymer dielectric for high-performance devices; 2) The need for polymer dielectric (chemical structures, polarity effects, etc) compatible with commonly used microfabrication technologies for highly integrated miniaturized devices (such as inverter, oscillator, etc); 3) The need for low-voltage and high-currentdensity high-performance devices (new transistor design or high dielectric constant insulators); 4) The strategies for large-scale device fabrication with uniform performance (new fabrication methods); 5) The need for high-stability devices (atmospheric, thermal). This Research Topic aims to address the above-mentioned challenges, including one Editorial, one Review and five Original research. The following themes will provide some clues to promote progress in this area. First of all, a novel photoactive semiconductor (named as IDTOT-4F) with an A-π-D-π-A-type configuration is synthesized for optoelectrical device with photo response and optical memory behaviors provided by W. Huang et al. Then, the development of new efficient interface engineering strategies (electrode approach by W. Li et al.; interface modification by T. Li et al.) for high-performance organic thin-film transistors. In addition, new methods for the construction of high-performance and high-stability organic thin-film transistors and relevant optoelectronic applications, which could be listed in the review article by L. Huang et al. and original research in the paper of W. Wang et al. Finally, X. Ren and co-workers reported a low-temperature solution process to fabricate a high-k metal oxide dielectric for low-power OFET applications. Edited and reviewed by: Liming Dai, Case Western Reserve University, United States

Effect of Interface Modification Conditions on Electrical Characteristics and Device Consistency of Organic Thin Film Transistors

Interface engineering with double-network dielectric structure for flexible organic thin film transistors

Interfacial Flat-Lying Molecular Monolayers for Performance Enhancement in Organic Field-Effect Transistors

Organic Thin‐Film Transistors: Interfacial Heterogeneity of Surface Energy in Organic Field‐Effect Transistors (adv. Mater. 8/2011)

Editorial: High-Performance Organic Thin-Film Transistors

Critical Impact of Gate Dielectric Interfaces on the Trap States and Cumulative Charge of High-Performance Organic Thin Field Transistors

High-performance Organic Thin-film Transistors: Principles and Strategies

Interface Engineering of Semiconductor/Dielectric Heterojunctions Toward Functional Organic Thin-Film Transistors

Study on Stability of Organic Field-effect Transistors Based on CuPc

Insights into the device structure, processing and material design for an organic thin-film transistor towards functional circuit integration

Modulating Contact Properties by Molecular Layers in Organic Thin‐film Transistors

Stability of ternary interfaces and its effects on ideal switching characteristics in inverted coplanar organic transistors

High-Yield, Scaling-Up Fabrication of Fermi-Level-Pinning-Free Organic Thin-Film Transistor Arrays with Printed Van der Waals Contacts

Enhanced Performances of Organic Thin Film Transistors by Dual Interfacial Modification of Dielectric Layer

In Situ and Ex Situ Investigation of the Organic-Organic Interface Effect

Organic Thin-Film Transistors In Sandwich Configuration

Study on the Performance of Organic Thin Film Transistors with Different Ratio of Channel Width to Length

Molecular layer modulation of two-dimensional organic ferroelectric transistors

Structure-Dependent Contact Barrier Effects in Bottom-Contact Organic Thin-Film Transistors

Tuning Interfacial Properties by Spontaneously Generated Organic Interlayers in Top‐Contact‐Structured Organic Transistors

Current Status and Opportunities of Organic Thin-Film Transistor Technologies