Abstract:Steel-basalt hybrid fibers reinforced cementitious composites (SBFRCC) have excellent mechanical properties, and current studies mainly focused on the macroscopic or microscopic properties of SBFRCC at room temperature separately. However, the macroscopic and microscopic properties of SBFRCC subjected to elevated temperatures, especially their correlation relationships are still unclear. Hence, this study aims to investigate the macroscopic and microscopic properties and their correlation relationships of SBFRCC subjected to elevated temperatures. Firest, the mass loss rate, three-point bending, uniaxial compressive, mercury intrusion porosimetry (MIP) and scanning electron microscopy (SEM) tests were conducted subjected to elevated temperatures. Then, the cor-relations between mass loss rate, fracture, uniaxial compressive behavior and pore structure were analyzed based on a correlation analysis approach. The results show that steel fiber and basalt fiber can effectively restrict crack initiation and propagation subjected to elevated temperatures. Uniaxial compressive strength and elastic modulus decrease with temperature while peak strain increases below 600 degrees C and drops after 600 degrees C. With the increase of temperature, the gel pore and transitional pore decrease, the large pores increase, the porosity in-creases, and the pore structure is "coarsened" significantly. The correlation coefficient between uniaxial compression strength and porosity is the highest, and it is reasonable to use porosity to characterize the changes of uniaxial compressive strength subjected to elevated temperatures. Gel pore has the highest correlation with initiation fracture toughness while large pore has the highest correlation with mass loss rate, unstable fracture toughness, fracture energy, and elastic modulus. Gel pore directly affects the generation of cracks while large pore directly affects the propagation of cracks.

Study of high-temperature deformation and creep of composite materials based on corundum and pyrophyllite raw material

High-Temperature Deformation and Creep of Nanostructured Composite Ceramics Based on Aluminum Oxide

Study on Creep Behavior and Fracture Life Prediction Method of P92 Steel Based on Finite Element Analysis

Correlation Between Macroscopic Properties and Microscopic Pore Structure in Steel-Basalt Hybrid Fibers Reinforced Cementitious Composites Subjected to Elevated Temperatures

Creep behaviour of an Al–Si–Al2O3 composite based on phase evolution at 1300oC

Experimental and Theoretical Investigations of High-Temperature Creep of the ENAW 5251 (AMg2) Aluminum Alloy under Step Loading

Stable second phase: The key to high-temperature creep performance of particle reinforced aluminum matrix composite

Mechanisms for High Creep Resistance in Alumina Forming Austenitic (AFA) Alloys

Refractory Composites Based on Pyrophyllite Raw Materials

An investigation on creep deformation and mechanical properties of a polycrystalline Fe-based alloy: a molecular dynamics study

Corundum Refractory Material in Alumina-Binder Resistant to High-Temperature Deformation

Research on Creep Behavior of Al2O3-SiO2/AZ91D Composite

Elasticity of Corundum at High Pressures and Temperatures: Implications for Pyrope Decomposition and Al‐Content Effect on Elastic Properties of Bridgmanite

Enhancing creep resistance performance in silica-based ceramic core materials through shell-core structure

Study on the Effect of Micromorphology and Creep Properties of In Situ (ZrB2 + Al2O3)/AA6016 Composites in Extruded State

Experimental and Numerical Investigation of Creep Behavior In Isotropic Composites

Crack Growth in Rotor P2M Steel at Elevated Temperature

The Numerical Simulation for High Temperature Creep of the Porous Cu Alloy

The study of silvinite and carnallite deformations under instaneous and sustained loading

Investigation of three-stage compressive creep of a spinel forming refractory castable containing 8% MgO

Deformation and Fracture of Corundum Ceramics with a Multilevel Pore Structure