Abstract:Cement, as a construction material, has low thermal resistance, inherent fire resistance, and is incombustible up to a certain degree. However, the loss of its mechanical performance and spalling are its primary issues, and it thus cannot retain its performance in refractory applications. The present study explores the performance of geopolymer formulations that have excellent fire resistance properties for potential refractory applications. This study is unique, as it investigates advanced solid geopolymer formulations that need only water to activate and bind. Various solid geopolymer formulations with fly ash as a precursor; potassium hydroxide and potassium silicate as activators; and mullite and alumina as refractory aggregates were studied for their compressive strength at up to 1100 °C and compared with their two-part conventional liquid alkaline geopolymer counterparts. Advanced solid geopolymer formulations with mullite and alumina as refractory aggregates had mechanical strength values of 84 MPa and 64 MPa post-1100 °C exposure and were further exposed to ten thermal cycles of 1100 °C to study their fatigue resistance and post-exposure compressive strengths. The geopolymer sample with mullite as a refractory aggregate yielded 115.2 MPa compressive strength after the fourth cycle of exposure. This sample was also studied for its temperature distribution upon direct flame exposure. All the geopolymer formulations displayed a drop in compressive strength at 600 °C due to viscous sintering and then a rise in strength at 1100 °C due to phase transformation. X-ray diffraction studies revealed that the formation of crystalline phases such as leucite, sanidine, and annite were responsible for the superior strengths at 1100 °C for the alumina- and mullite-based geopolymer formulations.

Corundum Refractory Material in Alumina-Binder Resistant to High-Temperature Deformation

Effect of Alumina Addition on the Properties of Corundum-Mullite Ceramic Matrix

Effect of in-situ formation of columnar mullite and pore structure refinement on high temperature properties of corundum casatbles

Preparation and characterization of corundum ceramics doped with Fe2O3 and TiO2 for high temperature thermal storage

Mechanical High-Temperature Properties and Damage Behavior of Coarse-Grained Alumina Refractory Metal Composites

High-temperature performance in Al2O3–Cr2O3 refractories: Effect of Al2TiO5

Pore evolution and slag resistance of corundum castables with nano zirconia addition

Enhancement, application, and challenges of chromium–corundum high‐temperature refractories

Effect of composite micro-powder added with α-Al2O3 and zirconium basic carbonate on the structure and properties of corundum castable

Additive manufacturing of functional corundum-mullite refractory with acid-corrosion resistance and heat insulating by direct ink writing

Enhancement of Sintering and Mechanical Properties of Alumina-Rich Al2O3-MgO-CaO Refractory Composite by Doping La2O3

Enhancing semi‐insulating refractory performance with polymeric microspheres and distinct calcium aluminate cements

Analysis on mechanism of explosive spalling resistance of aluminum powder on ladle corundum-based refractory castable

Strong, Tough and High Temperature Self-Lubricated Fibrous Monolithic Ceramic in Al2O3/Cr2O3 System

Influence of reactive alumina type on the properties of corundumspinel castables (review)

Effects of Alumina Bubble Addition on the Properties of Corundum–Spinel Castables Containing Cr2O3

High-temperature tensile strength of alumina-spinel refractory by Brazilian test at 1200 o C coupled with DIC in-situ monitoring

Advanced Solid Geopolymer Formulations for Refractory Applications

Deformation and Fracture of Corundum Ceramics with a Multilevel Pore Structure

Preparation and Characterization of Corundum-Mullite-Spinel Refractories from Low-Grade Bauxite and Magnesite Ores

Inhibition of Cr6+ in calcium aluminate cement bonded refractory castables using chrome-hibonite, Ca(Al,Cr)12O19 raw materials