Abstract:The pipe curtain structure method (PSM) is a novel construction method to control ground deformation strictly. Compared with the traditional pipe-roofing and pipe jacking method, the connection between pipes in large spacings using PSM is widely acknowledged as a unique construction procedure. Further study on this connection procedure is needed to resolve similar cases in that the pipes are inevitably constructed on both sides of existing piles. Cutting the steel plate during the connection procedure is the first step, which is crucial to control the safety and stability of the surrounding environment and existing structures. The deformation mechanism and limit support pressure of the cutting steel plate during the connection between pipes in large spacings are studied in this paper, relying on the undercrossing Yifeng gate tower project of Jianning West Road River Crossing Channel in Nanjing, China. A modified 3D wedge-prism failure model is proposed using the 3D discrete element method. Combined with Terzaghi loose earth pressure theory and the limit equilibrium theory, the analytical solutions for the limit support pressure of the excavation face of the cutting steel plate are derived. The modified 3D wedge-prism failure model and corresponding analytical solutions are categorised into two cases: (a) unilateral cutting scheme, and (b) bilateral cutting scheme. The analytical solutions for the two cases are verified from the numerical simulation and in-situ data and compared with the previous solutions. The comparative analysis between the unilateral and bilateral cutting schemes indicates that the bilateral cutting scheme can be adopted as a priority. The bilateral cutting scheme saves more time and induces less ground deformation than the unilateral one due to the resistance generated from the superimposed wedge. In addition, the parametric sensitivity analysis is carried out using an orthogonal experimental design. The main influencing factors arranged from high to low are the pipe spacing, the cutting size, and the pipe burial depth. The ground deformation increases with the increased cutting size and pipe spacing. The pipe burial depth slightly affects the ground deformation if the other two factors are minor. Cutting steel plates in small sizes, excavating soil under low disturbance, and supporting pipes for high frequency can effectively reduce the ground surface subsidence.

Design of combined pipe support with large span steel structure

Design of a Large Diameter Steel Reinforced Plastic Pipe

Modelling lateral pipe-soil interaction on soft clay using large displacement sequential limit analysis

Assessment Model of Pipe–soil Interaction During Large-Amplitude Lateral Displacements for Deep-Water Pipelines

Innovative Design of Pipe Piles Combined Both the Effect of Pile Foundation and Composite Foundation for Soft Soil Treatment

Configuration Analysis of Deepwater S-Lay Pipeline

Optimisation of Parameters and Application of Green Recyclable Precast Hollow Steel Pipe Concrete Supports

Effective Full-History Finite Element Modelling Of Pipe-In-Pipe Flowline System - From Installation To Operation

Pipelines Deformation Control for Double-Row Supported Excavation

Elastoplastic Pipe-Soil Interaction Analyses of Partially-Supported Jointed Water Mains

ANALYSIS OF STABILITY FAILURE FOR PIPELINE DURING LONG DISTANCE PIPE JACKING

Deformation mechanism and limit support pressure of cutting steel plate during connection between pipes in large spacing using pipe curtain structure method

Experimental Study and Numerical Analysis on Heavy-Duty Cast Steel Universal Hinged Supports for Large Span Structures

Effect of Stiffeners on the Bearing Capacity of Steel Support Cutting Pipe Structure

Stability Analyses of Steel Pipe in Pipe-Jacking and the Optimization of Wall Thickness

Design Challenge of Rigid Riser-Spool Piece Against HTHP Induced Expansion in Pipe-in-Pipe Systems

Structural strength analysis of curved submarine pipes during pipeline connection

Optimization and Stress Analysis of Underground Oil Pipelines in High and Steep Slope Areas

Analysis of Ultimate Bearing Capacity and Parameters of Steel Support Cutting Pipe Roofing Structure

Application Of Compressive Strain Capacity Models To Multiple Grades Of Pipelines