Abstract:The gradation and mechanical properties of aggregates impressively affect the load carrying capacity and rutting resistance of asphalt mixtures. They are able to provide some fundamental parameters that are linked to mixture performance. In order to accurately detect critical controlled sizes and obtain more fundamental parameters that can characterize load carrying capacity and rutting resistance of asphalt mixtures, this paper aims to develop a mechanics-based approach to evaluate aggregate gradation, which contains the theoretical packing analysis and discrete element simulation. An extended theoretical morphology framework is developed by checking the local and global interlock of graded aggregates in the theoretical packing analysis. The sieve size range of primary structure which has an interactive interlock can be determined in the local interlock check model. The relationship between the transferred force and the induced force is proposed in the densest and loosest packing arrangements, respectively. The morphological parameters of disruption factor and weighted average size for the global scale are also proposed in theoretical packing analysis. Then the discrete element method is used to validate the theoretical framework. The advanced gradation input algorithm procedure is established in the discrete element simulation to simulate the compression test of graded aggregates. The mechanical parameters of contact force, contact points and stress-strain curves are extracted from the simulation results. The results show that the discrete element method can validate the theoretical framework and output the performance related parameters. The contact force analysis shows that the aggregates retaining on sieve sizes of 2.36 and 4.75 mm provide more than 50% contribution to resist load, and the aggregates retaining on sieve sizes of 1.18, 0.6 and 0.3 mm provide more than 50% contribution to stabilize the structure. The coordination number analysis suggests that the gradation with more fine aggregates might lead to a greater number of voids but smaller air-void size when the asphalt content and porosity remain constant. The stress-strain curve analysis shows that the modulus and secondary strain are highly related to the rutting performance of an asphalt mixture. (C) 2019 Elsevier Ltd. All rights reserved.

An improved index of mixing degree and its effect on the strength of binary geotechnical mixtures

3D Discrete Element Modeling of Aggregate Homogeneity Influence on Bituminous Mix Shear Strength

Micromechanics-Based Analysis of the Effect of Aggregate Homogeneity on the Uniaxial Penetration Test of Asphalt Mixtures

Three-Dimensional Discrete-Element Modeling of Aggregate Homogeneity Influence on Indirect Tensile Strength of Asphalt Mixtures

Mechanical Evaluation of Aggregate Gradation to Characterize Load Carrying Capacity and Rutting Resistance of Asphalt Mixtures

A New Index for Evaluating Liquefaction Resistance of Soil under Combined Cyclic Shear Stresses

Effects of Asphalt-Aggregate Ratios and Compaction Efforts on Horizontal Aggregate Homogeneity in Asphalt Mixtures

Aggregate Distribution Influence On The Indirect Tensile Test Of Asphalt Mixtures Using The Discrete Element Method

Particle size effects on coarse soil-geogrid interface response in cyclic and post-cyclic direct shear tests

Experimental research on long-term dynamic characteristics of unsaturated road base and subbase mixtures

Mechanism study on the soil mechanical behavior of the mixed soil based on energy multi-scale method

Simulation of Effect of Horizontal Aggregate Distribution on Indirect Tensile Test of Asphalt Mixtures Using Discrete Element Method

Effect of the intermediate principal stress on the mechanical responses of binary granular mixtures with different fines contents

Effect of aperture ratio on the cyclic shear behaviour of aggregate-geogrid interfaces

Mesoscopic Mechanical Properties of Aggregate Structure in Asphalt Mixtures and Gradation Optimization

Mixture Optimization for Mechanical, Environmental, and Economic Objectives in Grouting Slurry for Repairing Earthen Sites

Effects of angularity and content of coarse particles on the mechanical behaviour of granular mixtures: a DEM study

Influence of soil particle size on monotonic and cyclic direct shear behaviors of geogrid-soil interface

An improved characterization model of liquefaction resistance by shear wave velocity for binary mixtures with consideration of coarse content

A new procedure for characterizing the critical intergranular contact state of non-plastic sand – fines mixed materials

Influences of particle size distribution and fines content on the excess pore water pressure generation of sand-silt mixtures under cyclic loading