Abstract:An explanation of the meso-mechanism of sand granular materials for the uniqueness of critical state is presented by means of the discrete element method (DEM) under flexible boundary loading conditions. A series triaxial drainage shear test (DEM simulations), in conjunction with the flexible boundary technique, of were performed for sand samples subjected to various physical states and with different particle size distributions. After carefully investigating the critical status of the results of the numerical calculation, the macroscopic failure modes and shear band evolution of sand, as well as the velocity vector field due to different initial states, were explored and classified. Furthermore, the evaluation rules and discrepancies between overall void ratios of the specimen and local void ratios within the shear band under the critical state were recorded and analyzed. The results proved that a sample with a small void tends to form a shear band, and the rotation of the particles in the non-shear zone is negligible. Conversely, sandy soil with large initial void ratios exhibited limited development of significant shear bands, and the change in void ratios within the shear region and the non-shear area are not significant. Interestingly, the particle-size distribution exerts minimal influence on the evolution rule which the void ratio converges within the shear band and diverges outside the shear region for both multi-stage and single-stage specimens. The void ratio within the shear band and deviator stress ratio tend to exhibit consistently for the same specimen with different initial physical states, thereby distinguishing the critical state. There is a significantly higher change in void ratio within the shear band compared to outside of it, yet it remains stable within a relatively similar range. Additionally, the invariant of the fabric tensor used to describe the critical state characteristics also demonstrates a high degree of consistency within the shear band. These findings strongly indicate that the critical state exists within the shear failure surface and is highly likely to be unique.

A new procedure for characterizing the critical intergranular contact state of non-plastic sand – fines mixed materials

Interactive Influence of Water and Fines Contents on the Strength of Compacted Cement-Stabilized Clayey Sands: Insights and Predictive Framework

Effect of Fines Loss on the Microstructure and Shear Behaviors of Gap-Graded Soils: A Multiscale Perspective

Unique Quantification of Critical State in Granular Media Considering Fabric Anisotropy

Discrete Element Modeling of Sand Behavior in a Biaxial Shear Test

Influences of fines content on cyclic resistance ratio of fines-sand-gravel mixtures

Determination of threshold fines content for sand-silt mixtures

Exploring Packing Density, Critical State, and Liquefaction Resistance of Sand-Fines Mixture Using DEM

Effect of Fines Content on the Compression Behavior of Calcareous Sand

Undrained Fragility of Clean Sands, Silty Sands, and Sandy Silts

Micromechanical Investigation of Suffusion and Its Consequence in Gap-Graded Granular Soil at the Opening of Underground Structures Using the Coupled CFD-DEM Method

High-cycle Shakedown, Ratcheting and Liquefaction Behavior of Anisotropic Granular Material with Fabric Evolution: Experiments and Constitutive Modelling

Numerical Study on the Shear Strength of Granular Materials under the Low Confining Pressure

Correlation between grain shape and critical state characteristics of uniformly graded sands: A 3D DEM study

A hypoplastic model for sand-fines mixtures

Influences of particle size distribution and fines content on the excess pore water pressure generation of sand-silt mixtures under cyclic loading

Theoretical and experimental study on multiscale coupled Mohr–Coulomb shear strength criterion of fibre-reinforced sand

Fluid‐solid coupled model for the internal erosion of gap‐graded soil‐rock mixtures with different fines contents: its verification and application

DEM investigation of strain behaviour and force chain evolution of gravel–sand mixtures subjected to cyclic loading

Critical state uniqueness of dense granular materials using discrete element method in conjunction with flexible membrane boundary

Effects of fine content on the mechanical properties and breakage behavior of gap-graded coral sand