Abstract:Currently, there is a demand in the aerospace industry for a more effective and non-invasive milling technique for powder metallurgy γ-TiAl alloy. The primary objective of this research is to examine the surface milling process of a γ-TiAl alloy generated by powder metallurgy. The primary objective of this study is to examine the impact of process parameters on the surface roughness and cutting force of the alloy, with the aim of optimizing both surface roughness and cutting force. The response surface method was implemented to examine the milling process, and the NSGA II algorithm was employed to optimise surface roughness, cutting force, and material removal rate. The findings indicate that the cutting depth exerts a significant impact on both the surface morphology and surface roughness. The available data indicates a clear correlation between the depth of cutting and the rate of feed, as well as the resulting assessment of surface roughness. Nevertheless, the first rise in spindle speed is associated with a subsequent increase in surface roughness, followed by a subsequent drop of a lesser magnitude. A minimal threshold for surface roughness has been established at 0.203μm. The spindle speed exerts the primary impact on the cutting force. There exists a positive link between the cutting force value and both the cutting depth and feed speed, as the cutting force value has a positive correlation with the incremental changes in these variables. Nevertheless, the relationship between cutting force and the observed trend is non-linear, exhibiting an initial decrease followed by a rise when cutting force is augmented. The minimal cutting force necessary was quantified as 112.3 N. Subsequently, a regression analysis was employed to develop a correlation model between surface roughness and cutting force. and machining parameters. The confirmation of the coefficients' validity in the model was achieved via the utilisation of analysis of variance (ANOVA) and residual analysis. The main goal of developing a machining parameter optimisation model is to limit surface roughness and cutting force, thereby improving operational efficiency. The NSGA-II method is utilised to tackle the problem of multi-objective optimisation, leading to the attainment of the optimal parameter solution. The purpose of the verification test is to evaluate the precision of the forecasts generated by the optimised model. The work holds importance in its analysis and juxtaposition of diverse processing factors, alongside the use of multi-objective optimization methodologies.

Multi-objective optimization of binder jet additive manufacturing of Co-Cr-Mo using machine learning

Process development for green part printing using binder jetting additive manufacturing

Optimization of Binder Jetting Using Taguchi Method

Study on Multi-Objective Optimization of Milling Process of Powder Metallurgy Titanium Aluminum Alloys

Process parameters optimization for improving surface quality and manufacturing accuracy of binder jetting additive manufacturing process

Building Orientation Determination Based On Multi-Objective Optimization For Additive Manufacturing

Effective use of adaptive slicing in binder jetting using Taguchi method and surface roughness measurement with image processing

A coupled thermo-mechanical material point model of binder jetted green part sintering

Enhancing Quality Control: Image-Based Quantification of Carbides and Defect Remediation in Binder Jetting Additive Manufacturing

Metal Binder Jetting Additive Manufacturing: A Literature Review

A comprehensive investigation on application of machine learning for optimization of process parameters of laser powder bed fusion-processed 316L stainless steel

Quality Prediction and Classification of Process Parameterization for Multi-Material Jetting by Means of Computer Vision and Machine Learning

Predictive Binder Jet Additive Manufacturing enabled by Clean Burn-off Binder Design

Multi-objective optimization of build orientation considering support structure volume and build time in laser powder bed fusion

Accelerated Discovery of 3D Printing Materials Using Data-Driven Multi-Objective Optimization

Adaptable multi-objective optimization framework: application to metal additive manufacturing

Machine Learning-Enhanced Process Parameter Optimization and Microstructure Prediction in Additive Manufacturing

Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges

Powder spreading, densification, and part deformation in binder jetting additive manufacturing

Tailoring green and sintered density of pure iron parts using binder jetting additive manufacturing

Coupled CFD-DEM simulation of interfacial fluid–particle interaction during binder jet 3D printing