Abstract:The salt lake brines that lithium is extracted from have high chloride levels making the brine very corrosive to stainless steel extraction column internals. This is a significant problem in column scale-up to industrial production. Two types of corrosion-resistant ceramic internals, the hybrid ceramic internal and ceramic plate, were designed and tested under pilot conditions for future industrial application in this field. The hydrodynamic results (Yi et al. Ind Eng Chem Res 56(4):999–1007 (2016), [1]) show that holdup of hybrid ceramic internal is higher than that of ceramic plate by around 50%, while Sauter mean diameter when using the hybrid ceramic internal is smaller than when using the ceramic plate by around 30%. This results in a larger mass transfer area, hence better mass transfer efficiency for the hybrid ceramic internal. Axial dispersion and mass transfer parameters are also examined (Yi et al. Ind Eng Chem Res 56(11):2049–3058 (2017), [2]). The results show that the column with hybrid ceramic internals has 50% lower axial dispersion coefficient and 50% higher mass transfer coefficient, leading to higher mass transfer efficiency. The transfer unit height of the column using hybrid ceramic internals can be as low as 0.2 m, showing very good efficiency. This is promising for near-future applications. Two-phase computational fluid dynamics (CFD) models have been developed for the two columns with ANSYS FLUENT commercial software. CFD successfully predicts the higher holdup and lower axial dispersion coefficients for the hybrid sieve plate pulsed column as measured in the experiments, and the cause for the difference in performance has been explained with information from CFD.

Dispersed Phase Holdup in a Tall and Low Plate Free Area Liquid Pulsed Sieve-Plate Extraction Column

Hydrodynamics of a Pulsed Sieve Plate Extraction Column

Variation of the Axial Dispersion along the Bed Height for Adsorbents with a Density Difference and a Log-Normal Size Distribution in an Expanded Bed

Evaluation and Characterization of Axial Distribution in Expanded Bed: II. Liquid Mixing and Local Effective Axial Dispersion

A Simplified Correlation of Mass Transfer in a Pulsed Sieve Plate Extraction Column

The Study of the Submicroparticle Packed Column

Hydrodynamic Performance of a Pulsed Solvent Extraction Column with Novel Ceramic Internals: Holdup and Drop Size

Mass transfer performance in a coalescence–dispersion pulsed sieve plate extraction column

CFD Simulation of Two-Phase Flow in a Hybrid Pulsed Sieve-Plate Solvent Extraction Column: Prediction of Holdup and Axial-dispersion Coefficients

Hydrodynamics And Mass-Transfer Of A Sieve Plate Column For Liquid-Liquid-Extraction

Effect of Sieve Plate Arrangement on Mass Transfer Performance of Pulsed-Sieve-Plate Extraction Column

Mass transfer and axial mixing characteristics in a coalescence-dispersion pulsed-sieve-plate extraction column

Two-Phase Flow Characteristics in A Coalescence-Dispersion Pulsed-Sieve-Plate Extraction Column

CFD Simulation of Liquid–Liquid Two-Phase Hydrodynamics and Axial Dispersion Analysis for a Non-Pulsed Disc and Doughnut Solvent Extraction Column

Drop Breakage in a Coalescence-Dispersion Pulsed-Sieve-plate Extraction Column

Phase Holdup and Liquid Dispersion in Gas-Liquid-Solid Circulating Fluidized Beds

An Experimental Study of Immiscible Liquid–liquid Dispersions in a Pump–mixer of Mixer–settler

Experimental Study and CFD Simulation of a Solvent Extraction Pulsed Column with Novel Ceramic Internals

Axial Dispersion and Mass Transfer of a Pulsed Solvent Extraction Column with Novel Ceramic Internals

Cfd Simulations of Flow Characteristics in Pulsed-Sieve-Plate Extraction Columns

An Improved Dynamic Combined Model for Evaluating the Mass Transfer Performances in Extraction Columns