Abstract:The salt lake brines that lithium is extracted from have high chloride levels making the brine very corrosive to stainless steel extraction column internals. This is a significant problem in column scale-up to industrial production. Two types of corrosion-resistant ceramic internals, the hybrid ceramic internal and ceramic plate, were designed and tested under pilot conditions for future industrial application in this field. The hydrodynamic results (Yi et al. Ind Eng Chem Res 56(4):999–1007 (2016), [1]) show that holdup of hybrid ceramic internal is higher than that of ceramic plate by around 50%, while Sauter mean diameter when using the hybrid ceramic internal is smaller than when using the ceramic plate by around 30%. This results in a larger mass transfer area, hence better mass transfer efficiency for the hybrid ceramic internal. Axial dispersion and mass transfer parameters are also examined (Yi et al. Ind Eng Chem Res 56(11):2049–3058 (2017), [2]). The results show that the column with hybrid ceramic internals has 50% lower axial dispersion coefficient and 50% higher mass transfer coefficient, leading to higher mass transfer efficiency. The transfer unit height of the column using hybrid ceramic internals can be as low as 0.2 m, showing very good efficiency. This is promising for near-future applications. Two-phase computational fluid dynamics (CFD) models have been developed for the two columns with ANSYS FLUENT commercial software. CFD successfully predicts the higher holdup and lower axial dispersion coefficients for the hybrid sieve plate pulsed column as measured in the experiments, and the cause for the difference in performance has been explained with information from CFD.

Axial Dispersion and Mass Transfer of a Pulsed Solvent Extraction Column with Novel Ceramic Internals

Experimental Study and CFD Simulation of a Solvent Extraction Pulsed Column with Novel Ceramic Internals

Hydrodynamic Performance of a Pulsed Solvent Extraction Column with Novel Ceramic Internals: Holdup and Drop Size

Mass Transfer Enhancement in Non‐dispersive Solvent Extraction with Helical Hollow Fiber Enabling Dean Vortices

Hydrodynamic Investigation on a Ceramic Hybrid Pulsed Column for the Extraction Recovery of Lithium from Salt Lake Brine

Advances in partitioning of minor actinides and rare earths from high level liquid waster

Mass transfer and axial mixing characteristics in a coalescence-dispersion pulsed-sieve-plate extraction column

Axial Mixing and Mass Transfer Characteristics of Pulsed Extraction Column with Discs and Doughnuts

Progresses of study and application on extraction columns

Mass transfer performance in a coalescence–dispersion pulsed sieve plate extraction column

A Ceramic Microfiltration Tube Membrane Dispersion Extractor

Axial Mixing and Mass Transfer Performance of an Annular Pulsed Disc-And-Doughnut Column

CFD Simulation of Liquid–Liquid Two-Phase Hydrodynamics and Axial Dispersion Analysis for a Non-Pulsed Disc and Doughnut Solvent Extraction Column

A Simplified Correlation of Mass Transfer in a Pulsed Sieve Plate Extraction Column

Hydrodynamics And Mass-Transfer Of A Sieve Plate Column For Liquid-Liquid-Extraction

Lithium solvent extraction by a novel multiframe flat membrane contactor module

An Improved Dynamic Combined Model for Evaluating the Mass Transfer Performances in Extraction Columns

Liquid-Liquid Extraction Performance of Multi-Stage Loop Extraction Column

A Dynamic Forward Mixing Model for Evaluating the Mass Transfer Performances of an Extraction Column

CFD Simulation of Two-Phase Flow in a Hybrid Pulsed Sieve-Plate Solvent Extraction Column: Prediction of Holdup and Axial-dispersion Coefficients

Cfd Simulations of Flow Characteristics in Pulsed-Sieve-Plate Extraction Columns