Abstract:A complex computational mass transfer model (CMT) is proposed for modeling the chemical absorption process with heat effect in packed columns. The feature of the proposed model is able to predict the concentration and temperature as well as the velocity distributions at once along the column without assuming the turbulent Schmidt number, or using the experimentally measured turbulent mass transfer diffusivity. The present model consists of the differential mass transfer equation with its auxiliary closing equations and the accompanied formulations of computational fluid dynamics (CFD) and computational heat transfer (CHT). In the mathematical expression for the accompanied CFD and CHT, the conventional methods of k–ε and t2¯–εt are used for closing the momentum and heat transfer equations. While for the mass transfer equation, the recently developed concentration variance c2¯ and its dissipation rate εc equations (Liu, 2003) are adopted for its closure. To test the validity of the present model, simulations were made for a pilot-scale randomly packed chemical absorption column of 0.1m ID and 7m high, packed with 1/2″ ceramic Berl saddles for CO2 removal from gas mixture by aqueous monoethanolamine (MEA) solutions (Tontiwachwuthikul et al., 1992 ) and an industrial-scale randomly packed chemical absorption column of 1.9m ID and 26.6m high, packed with 2″ stainless steel Pall rings for CO2 removal from natural gas by aqueous MEA solutions (Pintola et al., 1993). The simulated results were compared with the published experimental data and satisfactory agreement was found between them in both concentration and temperature distributions. Furthermore, the result of computation also reveals that the turbulent mass transfer diffusivity Dtvaries along axial and radial directions. Thus the common viewpoint of assuming constant Dt throughout the whole column is questionable, even for the small size packed column. Finally, the analogy between mass transfer and heat transfer in chemical absorption is demonstrated by the similarity of their diffusivity profiles.

Mass Transfer Study and Combined Model for a Karr Column

Exploring the Essence of Three-Phase Packed Distillation: Substantial Mass Transfer Computation

A Dynamic Forward Mixing Model for Evaluating the Mass Transfer Performances of an Extraction Column

An Improved Dynamic Combined Model for Evaluating the Mass Transfer Performances in Extraction Columns

Mass Transfer Characteristics in A Standard Pulsed Sieve-Plate Extraction Column

Hydrodynamics And Mass-Transfer Of A Sieve Plate Column For Liquid-Liquid-Extraction

Drop Sizes and Population Balance Model for a Karr Column

Modeling of Mass Transfer Characteristics of Bubble Column Reactor with Surfactant Present

New Model for Turbulent Mass Transfer and Its Application to the Simulations of a Pilot-Scale Randomly Packed Column for CO<sub>2</sub>−NaOH Chemical Absorption

Mass transfer model for liquid liquid micromixing systems

New Turbulent Model for Computational Mass Transfer and Its Application to A Commercial-Scale Distillation Column

A New Model for the Simulation of Distillation Column

Modelling mass transfer from a packed bed by fluid extraction

A Dynamic Interaction Mass Transfer Model for Simulating the Mass Transfer Process in Extraction Columns

A Reynolds Mass Flux Model for Gas Separation Process Simulation: I. Modeling and Validation

An Anisotropic Turbulent Mass Transfer Model for Simulation of Pilot-Scale and Industrial-Scale Packed Columns for Chemical Absorption

Axial Mixing and Mass Transfer Characteristics of Pulsed Extraction Column with Discs and Doughnuts

CFD Simulation of Flow and Mass Transfer in Structured Packing Distillation Columns

Application of Computational Mass Transfer (I) Distillation Process

Gravity Settling of Dispersed Phase Drop Swarms in Extraction Columns in Absence of Mass-Transfer

Chapter 2 Application of Computational Mass Transfer ( I ) Distillation Process