Abstract:2D and 3D numerical simulations with two-fluid approach were conducted to investigate the gas-liquid flow dynamic behaviour in a rectangle bubble column. In the simulations, k-ε and RNG k-ε turbulent models, which account for the influence of the bubbles on liquid phase turbulence, were employed to study the effect of such models on predication of the dynamic behaviour of the bubble plume. In addition, the influence of different interfacial force closures such as drag, lift and added mass forces were also assessed. The simulation results indicated that for the 2D cases, the use of k-ε model could merely yield a steady flow pattern with one big liquid circulation, while the use of RNG k-ε model could produce a steady flow pattern, characterised by the appearance of three large vortices. However, all the 3D simulations have captured the plume meandering behaviour. The results showed that the value of the turbulence eddy viscosity predicted with 3D simulation was one order smaller than that with 2D simulation. Particularly, the meandering period of the bubble plume predicted by RNG k-ε model, was obviously smaller than that predicted using k-ε model in 3D simulations. The former gave the average turbulence eddy viscosity to be almost one third of that predicted by the latter. The assessment of the use of different interfacial force closures and their combinations showed that the lift force has a pronounced effect on the result of bubbly flow behaviour besides the drag force. It was found that the predicted meandering period was much greater than the experimental observations without the inclusion of the lift force, while the predicted period was consistent with the experimental result when the lift force was considered. Our simulations also revealed that the inclusion of the added mass force could notably improve the prediction results.

Drop Sizes and Population Balance Model for a Karr Column

Experimental and Numerical Investigations of Scale-Up Effects on the Hydrodynamics of Slurry Bubble Columns

Modelling of Mass Transfer for Gas-Liquid Two-Phase Flow in Bubble Column Reactor with a Bubble Breakage Model Considering Bubble-Induced Turbulence

2-D Hydrodynamic Model of Bubble Column Based on Lateral-Force Balance

Modelling of breakage rate and bubble size distribution in bubble columns accounting for bubble shape variations

Mass Transfer Study and Combined Model for a Karr Column

Numerical Modelling of Bubbling Flow Dynamic Behaviour in a Bubble Column

CFD Simulation of Gas-Liquid Flow in Bubble Column with Two-bubble Phase Population Balance Model

Single Drop Breakage in a Reciprocating Plate Column

A Dynamic Interaction Mass Transfer Model for Simulating the Mass Transfer Process in Extraction Columns

Aggregate Models Based On The Wave Propagation Theory For High-Purity Distillation Columns

Simulation of Drop Breakage in Liquid–liquid System by Coupling of CFD and PBM: Comparison of Breakage Kernels and Effects of Agitator Configurations

Computational Fluid Dynamics–Population Balance Modeling of Gas–Liquid Two-Phase Flow in Bubble Column Reactors With an Improved Breakup Kernel Accounting for Bubble Shape Variations

An Improved Dynamic Combined Model for Evaluating the Mass Transfer Performances in Extraction Columns

Gravity Settling of Dispersed Phase Drop Swarms in Extraction Columns in Absence of Mass-Transfer

Effects of Bubble Coalescence and Breakup Models on the Simulation of Bubble Columns

Theoretical Prediction of Flow Regime Transition in Bubble Columns by the Population Balance Model

Experimental study on the differences between bubble and drop breakages in agitated turbulent flows

Numerical Investigation on Droplet Collision Phenomena in Moisture Separators Using Population Balance Model under Lagrangian Framework

Population Balance of Droplets in a Pulsed Disc and Doughnut Column with Wettable Internals

Experimental Study on Drop Breakup Time and Breakup Rate with Drop Swarms in a Stirred Tank