Abstract:Double-G fracture model, a new analytical model describing fracture behaviour on cracked concrete, was recently proposed by Xu and Zhao based on the conception of energy release rate. This model couples the Griffith brittle fracture theory with the bridging softening property of concrete, and it is an extension of double-K fracture model proposed by Xu and Reinhardt. In this model, two fracture parameters, i.e., the initiation fracture energy release GIcini and the unstable fracture energy release GIcun, are termed to distinguish the different crack propagation stages undergoing during the whole fracture process in concrete. The difference between the two parameters, written as GIcc, is assumed to come from the contribution by aggregate bridging interlock, which results in the presence of fracture process zone. In our present work, firstly, the new model is elaborately introduced. Then, fracture tests are conducted, where besides three-point bending beams, a new testing method, called wedge-splitting on compact tension is adopted. In the experiments, electrical strain gauges are used to measure initial cracking load. Based on recorded load–crack mouth opening displacement curve (P–CMOD) or load–displacement curve (P–δ) and load–strain curve (P–ε), double-G fracture parameters are experimentally determined. Further more, based on the assumed three parameters relationship among GIcini, GIcun and GIcc, unstable fracture energy release are calculated. A comparable result between the measured GIcun-e and the calculated GIcun-c confirms this assumption. In order to verify the feasibility of this new model, the effective double-K fracture parameters converted by double-G fracture parameters using K=EG are compared with the double-K fracture parameters calculated by double-K fracture model. It is found that there is a good agreement. Another two series of different initial crack-depth ratios three-point bending beams carried out by Refai and Swartz are also collected to provide more experimental verification. It shows that the results obtained from the double-G fracture model agree well with those of double-K fracture model.

The theoretical basis of testing methods to determine double-K criterion for crack propagation in concrete: technical report of the RILEM TC265-TDK

RILEM Standard: testing methods for determination of the double-K criterion for crack propagation in concrete using wedge-splitting tests and three-point bending beam tests, recommendation of RILEM TC265-TDK

Results of Round-Robin Testing for Determining the Double-K Fracture Parameters for Crack Propagation in Concrete: Technical Report of the RILEM TC265-TDK

Experimental measurement of double-K fracture parameters of concrete with small-size aggregates

Influential Factors for Double-K Fracture Parameters Analyzed by the Round Robin Tests of RILEM TC265-TDK

Determination of double-Determination of double- K criterion for crack propagation in quasi-brittle fracture Part I: experimental investigation of crack propagation

Determination of double- K criterion for crack propagation in quasi-brittle fracture, Part II: Analytical evaluating and practical measuring methods for three-point bending notched beams

ANALYSIS AND CRITERION OF FRACTURE PROCESS FOR CRACK PROPAGATION IN CONCRETE

A simplified method for determining double-K fracture parameters for three-point bending tests

Quantitative characterization and mechanism analysis on thickness-dependent size effect of concrete fracture

A comparative study on five approaches to evaluate double-K fracture toughness parameters of concrete and size effect analysis

A Simplified Extreme Method for Determining Double‐k Fracture Parameters of Concrete Using Experimental Peak Load

Determination of Double-K Fracture Parameters of Concrete Using Bottom-Notched Splitting Test

A study on double-K fracture parameters by using wedge-splitting test on compact tension specimens of various sizes

Determination of double-K criterion for crack propagation in quasi-brittle fracture, Part III: Compact tension specimens and wedge splitting specimens

DETERMINATION OF CRACK INITIATION AND EQUIVALENT CRACK LENGTH OF LOW STRENGTH CONCRETE USING STRAIN GAUGES

Effect of Size and Cohesive Assumptions on the Double-K Fracture Parameters of Concrete

Determination of fracture parameters for crack propagation in concrete using an energy approach

The Double-K Fracture Model: A State-of-the-art Review