Abstract:The results of experimental investigations using laser speckle interferometry on small size three-point bending notched beams and using photoelastic coating and the strain gauges on very large size compact tension specimens of concrete are presented in detail. The investigations showed that there exists a stage of stable crack propagation before unstable fracture occurs. The results are in agreement with other researchers' investigations using moire interferometry, holographic interferometry, dye-impregnation method and microscope. Further detailed study shows that the three different states, i.e., crack initiation, stable crack propagation and unstable fracture can be distinguished in the fracture process in concrete structures. In order to predict the crack propagation during the fracture process in quasi-brittle materials a double-K criterion is proposed. The double-K criterion consists of two size-independent parameters. Both of them are expressed in terms of the stress intensity factors. One of them reflects the initial cracking toughness, denoted with K ini , which can be directly evaluated by the initial cracking load, P ini , and the precast crack length, a 0 , using a formula of LEFM. The other one refers to the unstable fracture toughness, denoted with K un , which can be obtained inserting the maximum load, P max , and the effective crack length, a, into the same formula of LEFM. The values of the two parameters, K Ic ini and K Ic un , obtained from the small size three-point bending notched beams and the large size compact tension specimens show that K Ic ini and K Ic un are size-independent. Evaluating with the K-resistance curves obtained from the same test data, it is found that the proposed double-K criterion is equivalent to it in basic principle, but, the double-K criterion can be applied more easily than the K-resistance curve. Finally, as a practical example, the application of the double-K criterion to the prediction of the crack propagation in a concrete dam is discussed.

A simplified method for determining double-K fracture parameters for three-point bending tests

Determination of double- K criterion for crack propagation in quasi-brittle fracture, Part II: Analytical evaluating and practical measuring methods for three-point bending notched beams

Determination of double-Determination of double- K criterion for crack propagation in quasi-brittle fracture Part I: experimental investigation of crack propagation

Determination of double-K criterion for crack propagation in quasi-brittle fracture, Part III: Compact tension specimens and wedge splitting specimens

A Simplified Extreme Method for Determining Double‐k Fracture Parameters of Concrete Using Experimental Peak Load

Effect of Size and Cohesive Assumptions on the Double-K Fracture Parameters of Concrete

Influential Factors for Double-K Fracture Parameters Analyzed by the Round Robin Tests of RILEM TC265-TDK

RILEM Standard: testing methods for determination of the double-K criterion for crack propagation in concrete using wedge-splitting tests and three-point bending beam tests, recommendation of RILEM TC265-TDK

Influence of specimen geometry on determination of double-K fracture parameters of concrete: a comparative study

Determination of Double-K Fracture Parameters Using Semi-Circular Bend Test Specimens

The theoretical basis of testing methods to determine double-K criterion for crack propagation in concrete: technical report of the RILEM TC265-TDK

Determining double-K fracture parameters of concrete for compact tension and wedge splitting tests using weight function

A study on double-K fracture parameters by using wedge-splitting test on compact tension specimens of various sizes

Experimental measurement of double-K fracture parameters of concrete with small-size aggregates

Simplified equations for determining double-k fracture parameters of concrete for compact tension test

Determination of Double-K Fracture Parameters of Concrete Using Split-Tension Cube: A Revised Procedure

Determination of Double-K Fracture Parameters of Concrete Using Bottom-Notched Splitting Test