Abstract:The size effect in the fracture of solids represents a highly critical issue with a prolonged history of research. The size effect of traditional quasi-brittle materials can already be well described through the size effect model. However, there is still a lack of research on the size effect of strain-hardening cementitious composites (SHCC), a special type of fibre-reinforced concrete with macro-scale strain-hardening behaviour after first cracking. Being distinct from traditional quasi-brittle materials with softening nature, SHCC is thus expected to behave differently in terms of size effect. In this research, the structural size effect problem of SHCC is comprehensively studied by experimental investigation and theoretical analysis. Geometrically similar notched three-point bending specimens were tested in mode I and mixed mode I/II fracture condition. The whole-process of failure and matrix cracking zone around the main crack was captured with high resolution by digital image correlation technology. Experimental results showed that apparent fracture energy, nominal strength, structural ductility and fracture resistance curve are all structural size-dependent. The apparent fracture energy was shown to arise with specimen size within the tested range. This is related to large-scale pseudo yielding, i.e. enlargement of matrix cracking zone (like the yielding zone in metals) with increasing structural size. It thus provides an indirect method for the estimation of cohesive fracture energy of single crack with constitutive nature. Due to the scaled matrix cracking zone, an intermediate asymptote exists in the size effect curve of nominal strength, in addition to the plastic and LEFM asymptotes in the Bažant original size effect law. This resembles the recent finding of intermediate asymptote in plastic-hardening metal( Dönmez et al. 2023 ). The size-dependence of R-curve was also examined. Though size-dependent, the equivalent LEFM-based R-curves are shown to have three common stages reflecting different cracking processes. Based on experimental results, the size effect of fracture energy and nominal strength are finally modelled theoretically in the Bažant's framework of equivalence between energy release and fracture resistance.

Quantitative characterization and mechanism analysis on thickness-dependent size effect of concrete fracture

Experimental Study on Some Factors Affecting Fracture Property of Concrete

Numerical Experiment on Size Effect for Sfrc Splitting Fracture

Determination of Fracture Properties of Concrete Using Size and Boundary Effect Models

Experimental measurement of double-K fracture parameters of concrete with small-size aggregates

Effect of Size and Cohesive Assumptions on the Double-K Fracture Parameters of Concrete

Experimental study on fracture properties of self-compacting concrete

A comparative study on five approaches to evaluate double-K fracture toughness parameters of concrete and size effect analysis

A study on double-K fracture parameters by using wedge-splitting test on compact tension specimens of various sizes

Structural size effect in the mode I and mixed mode I/II fracture of strain-hardening cementitious composites (SHCC)

Influential Factors for Double-K Fracture Parameters Analyzed by the Round Robin Tests of RILEM TC265-TDK

Experimental and Numerical Investigation on the Tensile Fracture of Compacted Clay

A Mesoscopic Approach for the Size Effect on Fracture Energy of Concrete

Experimental investigation on the effect of coarse aggregate size and silica fume dosage to the fracture parameters of concrete

Fracture Behavior and Size Effect of UHPFRC: Experimental and Mesoscale Numerical Investigation

Experimental investigation and modified calculation model of critical crack propagation length of concrete

Influences of maximum aggregate sizes on double-K fracture parameters of concrete

The theoretical basis of testing methods to determine double-K criterion for crack propagation in concrete: technical report of the RILEM TC265-TDK

Fracture Toughness of Ordinary Plain Concrete Under Three-Point Bending Based on Double-K and Boundary Effect Fracture Models

Experimental study on acoustic emission and surface morphology characteristics of concrete under different fracture modes