Abstract:The physical and mechanical properties of antifriction oil-filled composites with a viscoelastic nanomodified matrix are investigated on the basis of mathematical models. The identification and prediction of their mechanical properties is performed using a micromechanics model with account of experimental data obtained in nanoindentation. Solutions of new contact problems in a quasi-static formulation of the motion of a punch with a flat base into a heterogeneous oil-saturated half-space with allowance for friction in the contact area are constructed. The multiphase heterogeneous medium is described, first, within the framework of the Biot–Frenkel model and second, using the concept of effective homogeneity. The contact problem for the Biot medium is reduced to an integral equation of the first kind with a differential kernel and a logarithmic singularity. After regularization, the numerical solution of the integral equation is constructed by the boundary element method. The solution to the boundary value problem was found by the finite-element method in the ANSYS software package for an equivalent homogeneous medium. A comparative analysis of two approaches to modeling the microstructure of a heterogeneous medium is presented. The influence of mechanical properties of the composite on its stress-strain state is investigated. The magnitude of the friction force arising in the contact area of the medium is studied. Such studies are of great practical importance in investigating new nanomodified antifriction composite materials. For this purpose, numerical calculations for an oil-filled composite with a phenylone matrix and nanosize additives are presented. The influence of porosity, fluid saturation, and friction coefficient on the tangential contact stresses is also examined.

Predicting the Mechanical Properties of Antifriction Composite Materials

A Friction Evaluation Method Based on Barrel Compression Test

Triboanalysis of Antifrictional Materials Based on Polyamides for Metal-Polymer Sliding Bearings

Review on Modeling of Mechanical and Thermal Properties of Nano- and Micro-Composites

A thermo-viscoelastic model for particle-reinforced composites based on micromechanical modeling

Molecular Dynamics Simulation of Friction in Self-Lubricating Materials: An Overview of Theories and Available Models

A numerical framework for modelling tire mechanics accounting for composite materials, large strains and frictional contact

THREE-DIMENSIONAL SETUP OF COMPOSITE MATERIALS AS A WAY TO ACHIEVE HIGH MECHANICAL PROPERTIES

A Unified Micromechanical Model for the Mechanical Properties of Two Constituent Composite Materials. Part IV: Rubber-Elastic Behavior

Prediction of the Inter-Fiber Mechanical Properties of Composites: Part I Standardization Micro-Scale Modelling Method and Damage Analysis

A micromechanics-based artificial neural networks model for rapid prediction of mechanical response in short fiber reinforced rubber composites

Tribological Behavior Prediction of Friction Materials for Ultrasonic Motors Using Monte Carlo‐based Artificial Neural Network

The Influence of the Volume Fraction of Ceramic Particles on the Plastic Strain Localization and Fracture of Metal Matrix Composites. Computational Analysis

Finite element simulation of a two-phase viscoplastic material: calculation of the mechanical behaviour

A Micromechanical Model for Interpenetrating Multiphase Composites

Interphase in the mechanical behaviour prediction models for nanocomposites

A Mechanistic-Based Data-Driven Approach for General Friction Modeling in Complex Mechanical System

Micromechanics methods for evaluating the effective moduli of soft neo-Hookean composites

Oral/poster reference: icf100247pr

Mechanical Prediction and Experimental Verification of Self-Lubricating Fabric Composites

Multi-scale model predicting friction of crystalline materials