Abstract:Rationale: The combination of an Elemental Analyzer, a GasBench interface and Isotope Ratio Mass Spectrometry (EA-GasBench-IRMS system) is a promising method for the δ15 N analysis of samples containing trace amounts of nitrogen (N). Nevertheless, N blanks, which are limiting factors for the accuracy and precision of measured δ15 N values, have received little study. In this paper, a variety of N blank sources in the EA-GasBench-IRMS system were systematically evaluated in order to take effective measures to reduce the blank interference as much as possible. Methods: N-Isotopic analysis was accomplished using an elemental analyzer coupled to an isotope ratio mass spectrometer via a sample loop and a GasBench interface. The N in the sample was converted into N2 gas in the EA system, and then transferred and trapped in a sample loop with a deactivated stainless-steel chromatography column packed with 5 A molecular sieve polymer at liquid nitrogen temperature (-196°C). Subsequently, the N2 gas was released by warming the sample loop up to 100°C and introduced into the isotope ratio mass spectrometer via the GasBench interface. The N blank sources in the EA-GasBench-IRMS system were investigated systematically by looking at seven parts: (a) Helium carrier gas, (b) Autosampler, (c) CO2 /water trap, (d) Size of reactor tube, (e) Sample collection time, (f) Oxygen gas, and (g) Capsules. Results: The N blanks are mainly derived from the helium carrier gas, atmospheric N2 entrained into the system through the autosampler, and the N retained in the CO2 /water trap filled with CO2 absorbent and Mg(ClO4 )2 , which together can account for a total of ~507.3 nmol N. Through purifying the helium gas, modifying the autosampler and using a cryogenic trap, we reduced the N blank considerably, to ~10.7 nmol, and obtained a nearly uniform isotopic composition (δ15 NBlank = -4.54 ± 0.36‰ AIR, n = 32, 1SD) of blank N thus guaranteeing a reliable correction. Conclusions: Measurements on a set of IAEA-N1, IAEA-600 and collagen standards with 40 nmol-200 nmol N produced accurate δ15 N values with standard deviation of ±0.26‰, ±0.22‰ and ± 0.23‰ (1σ) after blank correction, respectively. Our findings offer clues to optimizing the analytical method for trace N isotopic determination and they are also beneficial to improving δ15 N measurement using conventional EA-IRMS.

Experimental study of nitrogen isotope separation by ion-exchange chromatography: effect of process factors

High enrichment of 15N by chromatographic chemical process.

Effects of Cross Linking on the Chromatographic Nitrogen Isotope Separation

A Fast Separation Method for Isotope Analysis Based on Compressed Nitrogen Gas and Ion-Exchange Chromatography Technique—A Case Study of Sr-Nd Isotope Measurement

High Enrichment of 15N Isotope by Ion Exchange for Nitride Fuel Development

A Chemical Exchange System for Isotopic Feed to a Nitrogen and Oxygen Isotope Separation Plant

Separation of isotopes of nitrogen and oxygen by low temperature distillation of nitrogen oxide.

Advances in Boron Isotope Separation by Ion Exchange Chromatography

Progress in Boron Isotopes Separation by Ion Exchange Chromatography

Separation of isotopologues of amphetamine with various degree of deuteration on achiral and polysaccharide-based chiral columns in high-performance liquid chromatography

Stable Nitrogen Isotope Analysis of Amino Acids by Gas Chromatography-Combustion-Isotope Ratio Mass Spectrometry for High-Resolution Trophic Level Estimation

Can Nitrogen-Based Complex Hydrides Be a Hydrogen Isotope Separation Material?

Determination of nitrogen isotopes on samples with tens of nmol of N using the combination of an elemental analyzer, a GasBench interface and an isotope ratio mass spectrometer: An evaluation of blank N contributions and blank-correction

Optimizations of the EA-IRMS system for δ 15 N analysis of trace nitrogen

On Progress in Use of Micro-diffusion Method inδ15N-NH4+ andδ15N-NO3- Measurements

Separation of Total Nitrogen from Sediments into Organic and Inorganic Forms for Isotopic Analysis

Direct separation of Zn from dilute aqueous solutions for isotope composition determination using multi-collector ICP-MS

Chromatographic Separation of Cd from Plants Via Anion-Exchange Resin for an Isotope Determination by Multiple Collector ICP-MS.

Preparation of modified γ-alumina as stationary phase in gas–solid chromatography and its separation performance for hydrogen isotopes

Abhängigkeit der Chlor-Isotopenseparation vom Vernetzungsgrad eines stark basischen Anionenaustauschers / Dependence of Chlorine Isotope Separation on the Degree of Cross Linkage of a Strongly Basic Anion Exchange Resin

A Proof‐of‐Principle Study for δ15N Measurements of Aqueous Dissolved Nitrate With a Modified LC‐IRMS Interface