Abstract:Sorption enhanced steam gasification of biomass (SESGB) presents a promising approach for producing high-purity H2 with potential for zero or negative carbon emissions. This study investigated the effects of gasification temperature, CaO to carbon in biomass molar ratio [CaO/C], and steam flow on the SESGB process, employing carbide slag (CS) and its modifications, CSSi2 (mass ratio of CS to SiO2 is 98:2) and CSCG5 (mass ratio of CS to coal gangue (CG) is 95:5), as CaO-based sorbents. The investigation included non-isothermal and isothermal gasification experiments and kinetic analyses using corn cob (CC) in a macro-weight thermogravimetric setup, alongside a fixed-bed pyrolysis-gasification system to assess operational parameter effects on gas product. The results suggested that CO2 capture by CaO reduced the mass loss during the main gasification as the [CaO/C] increased. The appropriate temperature for SESGB process should be selected between 550 and 700 °C at atmospheric pressure. The appropriate amount of sorbent or steam could facilitate the gasification reaction, but excessive addition led to adverse effects. Operational parameters influenced the apparent activation energy (Ea) by affecting various gasification reactions. For each test, Ea at the char gasification stage was significantly higher than that at the rapid pyrolysis stage. The addition of CS notably increased H2 concentration and yield, while sharply reducing CO2 levels. H2 concentration initially rose and then fell with greater steam flow, peaking at 76.11 vol% for a steam flow of 1.0 g/min. H2 yield peaked at 298 mL/g biomass with a steam flow of 1.5 g/min, a gasification temperature of 600 °C and a [CaO/C] of 1.0. Increasing gasification temperature remarkably boosted the H2 and CO2 yields. Optimal conditions for the SESGB using CS as a sorbent, determined via response surface methodology (RSM), include a gasification temperature of 666 °C, a [CaO/C] of 1.99, and a steam flow of 0.5 g/min, under which H2 and CO2 yields were 464 and 48 mL/g biomass, respectively. CSSi2 and CSCG5 demonstrated excellent cyclic H2 production stability, maintaining H2 yields around 440 mL/g biomass and low CO2 yields (∼60 mL/g biomass) across five cycles. The study results offer new insights for the high-value utilization of agroforestry biomass and the reduction and resource utilization of industrial waste.

Thermal conversion efficiency of producing hydrogen enriched syngas from biomass steam gasification

Syngas Composition: Gasification of Wood Pellet with Water Steam through a Reactor with Continuous Biomass Feed System

Investigation of Hydrogen Production Using Wood Pellets Gasification with Steam at High Temperature over 800 °C to 1435 °C

Numerical investigation of different biomass feedstock on syngas production using steam gasification and thermodynamic analysis

Research of Characteristics Biomass Staged-Gasification for Hydrogen-Rich Syngas

Hydrogen Production from Steam Gasification of Tableted Biomass in Molten Eutectic Carbonates

Steam reforming of biomass gasification gas for hydrogen production: From thermodynamic analysis to experimental validation

Simulation of air-steam gasification of pine sawdust in an updraft gasification system for production of hydrogen-rich producer gas

Optimizing Hydrogen-Rich Biofuel Production: Syngas Generation from Wood Chips and Corn Cobs

Steam gasification of biomass in dual fluidized bed gasifiers: A review

Integration of Biomass/steam Gasification with Heat Recovery from Hot Slags: Thermodynamic Characteristics

Thermochemical Conversion of Biomass for Syngas Production: Current Status and Future Trends

Investigation of hydrogen-rich syngas production from biomass gasification with CaO and steam based on real-time gas release behaviors

Steam Gasification of Catalytic Pyrolysis Char for Hydrogen-Rich Gas Production

Hydrogen-rich gas production from biomass air and oxygen/steam gasification in a downdraft gasifier

Hydrogen production via integrated configuration of steam gasification process of biomass and water‐gas shift reaction: Process simulation and optimization

Maximizing hydrogen-rich syngas production from rubber wood biomass in an updraft fluidized bed gasifier: An advanced 3D simulation study

Practical achievements on biomass steam gasification in a rotary tubular coiled-downdraft reactor

Advancing hydrogen generation: Kinetic insights and process refinement for sorption-enhanced steam gasification of biomass utilizing waste carbide slag

Enhancement of hydrogen production in steam gasification of sludge: Comparing different strategies for deeper conversion of hydrogen sources in biomass

Steam Gasification of Biomass for Hydrogen Production – A Review and Outlook