Abstract:Sorption enhanced steam gasification of biomass (SESGB) presents a promising approach for producing high-purity H2 with potential for zero or negative carbon emissions. This study investigated the effects of gasification temperature, CaO to carbon in biomass molar ratio [CaO/C], and steam flow on the SESGB process, employing carbide slag (CS) and its modifications, CSSi2 (mass ratio of CS to SiO2 is 98:2) and CSCG5 (mass ratio of CS to coal gangue (CG) is 95:5), as CaO-based sorbents. The investigation included non-isothermal and isothermal gasification experiments and kinetic analyses using corn cob (CC) in a macro-weight thermogravimetric setup, alongside a fixed-bed pyrolysis-gasification system to assess operational parameter effects on gas product. The results suggested that CO2 capture by CaO reduced the mass loss during the main gasification as the [CaO/C] increased. The appropriate temperature for SESGB process should be selected between 550 and 700 °C at atmospheric pressure. The appropriate amount of sorbent or steam could facilitate the gasification reaction, but excessive addition led to adverse effects. Operational parameters influenced the apparent activation energy (Ea) by affecting various gasification reactions. For each test, Ea at the char gasification stage was significantly higher than that at the rapid pyrolysis stage. The addition of CS notably increased H2 concentration and yield, while sharply reducing CO2 levels. H2 concentration initially rose and then fell with greater steam flow, peaking at 76.11 vol% for a steam flow of 1.0 g/min. H2 yield peaked at 298 mL/g biomass with a steam flow of 1.5 g/min, a gasification temperature of 600 °C and a [CaO/C] of 1.0. Increasing gasification temperature remarkably boosted the H2 and CO2 yields. Optimal conditions for the SESGB using CS as a sorbent, determined via response surface methodology (RSM), include a gasification temperature of 666 °C, a [CaO/C] of 1.99, and a steam flow of 0.5 g/min, under which H2 and CO2 yields were 464 and 48 mL/g biomass, respectively. CSSi2 and CSCG5 demonstrated excellent cyclic H2 production stability, maintaining H2 yields around 440 mL/g biomass and low CO2 yields (∼60 mL/g biomass) across five cycles. The study results offer new insights for the high-value utilization of agroforestry biomass and the reduction and resource utilization of industrial waste.

Integration of Biomass/steam Gasification with Heat Recovery from Hot Slags: Thermodynamic Characteristics

Integrated Biomass Gasification Using the Waste Heat from Hot Slags: Control of Syngas and Polluting Gas Releases

Role of Steel Slags on Biomass/carbon Dioxide Gasification Integrated with Recovery of High Temperature Heat.

Integration of coal gasification and waste heat recovery from high temperature steel slags: an emerging strategy to emission reduction

Integrated carbon dioxide/sludge gasification using waste heat from hot slags: syngas production and sulfur dioxide fixation.

Two-Stage High Temperature Sludge Gasification Using The Waste Heat From Hot Blast Furnace Slags

Characteristics of low temperature biomass gasification and syngas release behavior using hot slag

Heat Recovery from High Temperature Slags: A Review of Chemical Methods

Achieving waste to energy through sewage sludge gasification using hot slags: syngas production

Combining theory and experiment analysis in molten BFS waste heat recovery integrated with coal gasification

The production of hydrogen-rich gas by wet sludge pyrolysis using waste heat from blast-furnace slag

Enhanced looping biomass/vapour gasification utilizing waste heat from molten copper slags

Thermodynamic Analysis of Hydrogen Production from Bio-Oil Steam Reforming Utilizing Waste Heat of Steel Slag

The production of hydrogen-rich gas by wet sludge gasification using waste heat of blast-furnace slag: Mass and energy balance analysis

Advancing hydrogen generation: Kinetic insights and process refinement for sorption-enhanced steam gasification of biomass utilizing waste carbide slag

Hydrogen-rich gas production from biomass catalytic gasification using hot blast furnace slag as heat carrier and catalyst in moving-bed reactor

The Thermodynamic Characterizations of Hydrogen Production from Catalyst-Enhanced Steam Reforming of Bio-Oil over Granulated Blast Furnace Slag as Heat Carrier

Co-gasification of Acid Hydrolysis Residues and Sewage Sludge in a Downdraft Fixed Gasifier with CaO As an In-Bed Additive

Elevating clean energy through sludge: A comprehensive study of hydrothermal carbonization and co-gasification technologies

Thermodynamic and exergy assessments of supercritical water gasification of oily sludge assisted by hydrothermal flame

A novel sludge pyrolysis and biomass gasification integrated method to enhance hydrogen-rich gas generation