Abstract:Dye sensitised solar cells (DSCs) based on mesoporous nanostructured TiO2 have attracted attention as an alternative to silicon photovoltaics. However, the use of a liquid electrolyte causes practical problems of leakages and its volatilisation, desorption and photodegradation of the dye, corrosion of the platinum secondary electrode and ineffective sealing of cells for long term applications in solar panels. Some of the attempts to solve this problem include the use of polymer electrolytes, gelling agents and both organic and inorganic hole conductors. A common feature of all such alternatives is the notable reduction in efficiency of the resultant solar cells primarily, due to the lower mobility of the iodide species through the solid or quasi-solid medium and imperfect wetting of pores with the electrolyte. The conversion efficiencies with the gel polymer electrolytes typically do not exceed 5%, but even at low efficiencies, these cells may become viable alternatives to the organic liquid containing Gratzel type cells due to improved stability and better sealing ability. The dyes are less liable to undergo photocorrosion and desorption, and the corrosion effects on the Pt electrode are lower. Some commonly used polymer electrolytes include poly(ethylene oxide), poly(propylene oxide), poly(acrylonitrile), poly(methyl methacrylate), poly(vinyl chloride) and poly(vinylidene fluoride). Plasticisers employed are ethylene carbonate, propylene carbonate, dimethyl carbonate, γ-butyl lactone and diethylene carbonate. In addition, inert fillers, such as TiO2, SiO2, etc., are added to enhance ionic conductivity and stability at the interface with electrodes. These self-sealing gel polymer electrolytes have reported efficiencies of about 2–5%. Recently, the poly(acrylonitrile) based gel polymer electrolytes are reported to give an efficiency of 7·5% for the TiO2/Ru-N719 system under AM 1·5 illumination. Incorporation of TiO2 nanoparticles increases the efficiency of a DSC employing poly(vinylidene fluoride-co-hexafluoropropylene) from 5·72 to 7·18% where the standard liquid electrolyte gave an efficiency of 7·01%. The nanoparticles here are assumed to reduce recombination at the interface of dyed electrode/electrolyte. This review will cover only the application of gel polymer electrolytes for dye sensitised TiO2 systems in quasi-solid state solar cells and will not cover the closely related areas of gelated electrolytes where the standard liquid electrolyte is gelated with gelling agents and conducting polymers used as hole conductors.

Gel Polymer Electrolyte from Poly(Acrylamide) Coated on Natural Rubber Latex by Topology-Controlled Emulsion Polymerization for Dye Sensitized Solar Cells Application

Gel Polymer Electrolyte from Ozonolysis of Poly(3-(trimethoxysilyl)Propyl Methacrylate) Graft on Natural Rubber Latex for Natural Dye Sensitized Solar Cell Application

Gel polymer electrolytes based on polyacrylonitrile and a novel quaternary ammonium salt for dye-sensitized solar cells

Poly(acrylamide-co-acrylic acid)-based gel polymer electrolytes incorporated with sodium iodide for dye-sensitized solar cells (DSSCs)

Preparation and Characterization of Novel Polymer-Based Gel Electrolyte for Dye-Sensitized Solar Cells Based on poly(vinylidene fluoride-co-hexafluoropropylene) and poly(acrylonitrile-co-butadiene) or poly(dimethylsiloxane) bis(3-aminopropyl) Copolymers

Polyacrylonitrile-based gel polymer electrolytes for dye-sensitized solar cells: a review

The Electrically Conductive Function Of High-Molecular Weight Poly(Ethylene Oxide) In Polymer Gel Electrolytes Used For Dye-Sensitized Solar Cells

Preparation of Poly(Acrylic Acid)/Gelatin/Polyaniline Gel-Electrolyte and Its Application in Quasi-Solid-State Dye-Sensitized Solar Cells

Gel polymer electrolytes for dye sensitised solar cells: a review

Electrochemical and structural characterization of polyacrylonitrile (PAN)–based gel polymer electrolytes blended with tetrabutylammonium iodide for possible application in dye-sensitized solar cells

Transparent Succinonitrile-Modified Polyacrylate Gel Polymer Electrolyte for Solid Electrochromic Devices

Novel Nanocomposite Of Poly(Acrylonitrile-Co-Glycidyl Methacrylate) Crosslinked With Jeffamine-Functionalized Multiwalled Carbon Nanotubes As Gel Polymer Electrolytes

A polymer electrolyte by ozonolysis of poly(3-(trimethoxysilyl) propyl methacrylate) grafted on natural rubber latex in colloid state and its application

Preparation Of Paa-G-Ctab/Pani Polymer Based Gel-Electrolyte And The Application In Quasi-Solid-State Dye-Sensitized Solar Cells

The Effect of Plasticizers on the Polypyrrole-Poly(vinyl alcohol)-Based Conducting Polymer Electrolyte and Its Application in Semi-Transparent Dye-Sensitized Solar Cells

Polyurethane-Based Gel Electrolyte for Application in Flexible Electrochromic Devices

Facile Synthesis And Photo-Tunable Properties Of A Photosensitive Polymer Whose Chromophores Bound With Ph-Labile Cyclic Acetal Linkages

Electrochemical Polymerization-Fabricated Several Triphenylamine–Carbazolyl-Based Polymers with Improved Short-Circuit Current and High Adsorption Stability in Dye-Sensitized Solar Cells

A polysaccharide extracted from guar beans-based gel polymer electrolytes for efficient dye-sensitized solar cells

ADVANCEMENT OF POLYMER ELACTROLYTE FOR DYE-SENSITIZED SOAR CELLS

In situ Poly(methyl methacrylate)/Graphene Composite Gel Electrolytes for Highly Stable Dye-Sensitized Solar Cells