Abstract:Abstract lithium ion conducting polymer electrolyte is one of the essential components of modern rechargeable lithium batteries because of its good interfacial contact with electrodes and effective mechanical properties. A solid lithium ion conducting polymer blend electrolyte is prepared using poly (vinyl acetate) (PVAc) and poly (methyl methacrylate) (PMMA) polymers with different molecular weight percentages (wt%) of lithium chloride (LiCl) by the solution casting technique with tetrahydrofuran as a solvent. The polymer electrolytes were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), Thermogravimetry (TG), AC impedance spectroscopy and ionic transport measurements. XRD and FTIR studies confirm the amorphous nature of the polymer electrolyte and the complexation of salt with polymer. The thermal behavior of polymer electrolytes has been studied from DSC and TG. The highest conductivity obtained using AC impedance spectroscopy is 1.03×10 −5 Scm −1 at 303 K for 70 wt%PVAc:30 wt%PMMA:0.8 wt% of LiCl polymer-salt complex. The plasticizer ethylene carbonate (EC) and nanofiller titania (TiO 2 ) were added to the optimized high conducting blend polymer electrolyte. An enhancement in conductivity by one order of magnitude was observed for the plasticized 70 wt%PVAc-30 wt%PMMA-0.8 wt% LiCl polymer electrolyte at ambient temperature. The ionic conductivity value obtained using AC impedance spectroscopy for the plasticized 70 wt%PVAc-30 wt%PMMA-0.8 wt% LiCl polymer electrolyte was 1.03×10 −4 Scm −1 . The highest conductivity obtained for 70 wt%PVAc-30 wt%PMMA-0.8% LiCl-6 mg TiO 2 was 4.45×10 −4 Scm −1 . Dielectric properties of polymer films are studied and discussed. The electrochemical stability of 1.69 V and 2.69 V was obtained for 70 wt%PVAc-30 wt%PMMA-0.8% LiCl and 70 wt%PVAc-30 wt%PMMA-0.8% LiCl-6 mg TiO 2 polymer electrolytes, respectively, using linear sweep voltammetry. The value of Li + ion transference number was estimated by the DC polarization method and was found to be 0.99 for the highest conducting 70 wt%PVAc-30 wt%PMMA-0.8 wt% LiCl-6 mg TiO 2 nanocomposite polymer electrolyte.

A polymer electrolyte by ozonolysis of poly(3-(trimethoxysilyl) propyl methacrylate) grafted on natural rubber latex in colloid state and its application

Gel Polymer Electrolyte from Ozonolysis of Poly(3-(trimethoxysilyl)Propyl Methacrylate) Graft on Natural Rubber Latex for Natural Dye Sensitized Solar Cell Application

Preparation and characterization of PEO-PMMA polymer composite electrolytes doped with nano-Al 2 O 3

An Excellent Ozone-Resistant Polymethylvinylsiloxane Coating on Natural Rubber by Thiol-Ene Click Chemistry

Gel Polymer Electrolyte from Poly(Acrylamide) Coated on Natural Rubber Latex by Topology-Controlled Emulsion Polymerization for Dye Sensitized Solar Cells Application

Preparation of methyl grafted natural rubber and its application in super capacitor electrolytes

Synthesis of Poly(Methyl Methacrylate)-Caprolactam-Sericin Nanoparticles and Their Reinforcing Effect on Mechanical Properties of Natural Rubber

Novel study on a safe, low-cost natural rubber: Mg-based solid polymer electrolyte for energy storage

Characterization of a natural rubber based solid polymer electrolyte to be used for a magnesium rechargeable cell

Preparation and Properties of High Performance Bio-based Elastomer Based on Methyl Methacrylate Grafted Natural Rubber

Preparation, structural characterization, and antioxidative behavior in natural rubber of antioxidant GM functionalized nanosilica

Poly(sodium 4-Styrenesulfonate) Modified Carbon Nanoparticles by a Thermo-Mechanical Technique and Its Reinforcement in Natural Rubber Latex

Preparation and temperature-responsive behavior of crosslinked polymers between poly(N-isopropylacrylamide) and natural rubber

Study of PVAc-PMMA-LiCl polymer blend electrolyte and the effect of plasticizer ethylene carbonate and nanofiller titania on PVAc-PMMA-LiCl polymer blend electrolyte

Microwave Irradiated Polyester Staple Fibers for Natural Rubber with Excellent Interface Performance

Physico-Chemical, Thermal, and Electrochemical Analysis of Solid Polymer Electrolyte from Vegetable Oil-Based Polyurethane

Preparation of High-Performance Polymer Electrolyte Nanocomposites Through Nanoscale Silica Particle Dispersion

Natural Rubber Blended with Polystyrene Nanoparticles Prepared by Differential Microemulsion Polymerization

FTIR and rheological studies of PMMA-based nano-dispersed gel polymer electrolytes incorporated with LiBF4 and SiO2

A Mussel-Like Inspired Modification of BaTiO3 Nanopartciles Using Catechol/polyamine Co-Deposition and Silane Grafting for High-Performance Dielectric Elastomer Composites

Surface Modification of Electroactive Polymer Films by Ozone Treatment