Abstract:The fracture mechanisms of the carbon fibers seriously depend on fiber orientations which significantly influence the surface quality of carbon fiber reinforced plastics (CFRPs). Rotary ultrasonic drilling (RUD), possessing some excellent characteristics including the superior sidewall quality and high cylindricity error, offers a possibility for the efficient drilling of the CFRP components. In contrast, the effects of fiber orientations on fiber fracture mechanisms are still not fully recognized in RUD of CFRP composites. Incorporated with kinematic characteristics of the abrasive, a novel theoretical model was developed to quantitatively describe the effective orientation of the fiber. Afterwards, the drilling experiments with and without ultrasonic were conducted under the same parameters. The surface topographies of the hole sidewalls at various orientations were comparatively characterized to explore the fiber fracture mechanisms. Subsequently, the influences of these mechanisms and the drilling parameters the surface qualities were also investigated. Moreover, the bending failure mechanisms of the carbon fibers were explored through theoretical analysis. As a result, another fiber fracture mechanism, bending failure, was identified with the smooth fracture and micro-fragmentation topographies at upwind and leeward parts of the fiber cross-section, respectively. Ultrasonic superimposition by means of the immense inertia force of the abrasive promoted the micro-fracture of the carbon fiber. The weaker sustainment from the back-up materials brought about the serious bending failure of fiber oriented at 135°, while the axial load component aggravated the tensile fracture of the carbon fiber with the effective orientation of 45°. The critical moment of the fiber bending failure was also established, by incorporating the beam theory and linear elastic fracture mechanics. The fundamental investigation provided a favorable foundation for further optimizing the parameters to improve the drilling quality and efficiency in formal RUD of CFRP composites.

Experimental and scale-span numerical investigations in conventional and longitudinal torsional coupled rotary ultrasonic–assisted drilling of CFRPs

Hole quality in longitudinal–torsional coupled ultrasonic vibration assisted drilling of carbon fiber reinforced plastics

Experimental Study on Longitudinal-Torsional Ultrasonic Vibration Drilling of Carbon Fiber–reinforced Plastics/titanium Alloy Stacks

Simulation and experimental research on longitudinal-torsional ultrasonic vibration drilling of CFRP/Ti laminates

Hole Diameter Variation and Roundness in Dry Orbital Drilling of Cfrp/Ti Stacks

Study on the mechanism and performance of longitudinal-torsional ultrasonic vibration assisted drilling CFRP/Ti stack

Mechanical Drilling Force Model for Longitudinal Ultrasonic Vibration-assisted Drilling of Unidirectional CFRP

A study on the ultrasonic vibration on the cutting performance during ultrasonic-assisted drilling of CFRP with twist and dagger drill bits

Study on exit damage characteristics of ultrasonic vibration assisted drilling of CFRP

Effects of fiber orientations on fracture mechanisms in rotary ultrasonic drilling of carbon fiber reinforced plastic laminates

Study on dynamic drilling forces of CFRP/Ti stacks during longitudinal-torsional ultrasonic vibration drilling

Reducing cutting force in rotary ultrasonic drilling of ceramic matrix composites with longitudinal-torsional coupled vibration

Improving hole quality of thick CFRP laminates through a laser-mechanical compound drilling process

Feasibility Study of Longitudinal–Torsional-Coupled Rotary Ultrasonic Machining of Brittle Material

Modeling Evolution of Cutting Force in Ultrasonically Assisted Drilling of Carbon Fiber Reinforced Plastics

Ultrasonic-Vibration-Assisted Waterjet Drilling of [0/45/−45/90]2s Carbon-Fiber-Reinforced Polymer Laminates

Dual-Method Characterization and Optimization of Drilling Parameters for Picosecond Laser Drilling Quality in CFRP

Effects of machining conditions on the hole wall delamination in both conventional and ultrasonic-assisted CFRP drilling

Study on dedicated drill bit design for carbon fiber reinforced polymer drilling with improved cutting mechanism

Multi‐objective optimization of ultrasonic vibration‐assisted drilling in carbon fiber reinforced polyetherketoneketone laminate

Subsurface damage and burr improvements of aramid fiber reinforced plastics by using longitudinal–torsional ultrasonic vibration milling