Abstract:CFRP/metal co-cured structure has been increasingly applied in the aerospace industry due to its outstanding mechanical properties of high specific strength and high stiffness. Compared with the stack structure, the co-cured material of which the metal was heavily wrapped by the CFRP prepregs has better interface performance due to the absence of interface gap, being helpful to improve the bonding strength with other parts. Hole making is an inevitable manufacturing process for the assembly of co-cured material while there still exists several challenges during the drilling operation. To be specific, the hole size with low accuracy and hole morphology with severe defects are the main concerns for the manufacturers, which can be mainly attributed to the tangled chips and high cutting temperatures. To solve the aforementioned problems, the low frequency vibration assisted drilling (LFVAD) operation was performed for the newly developed CFRP/Al co-cured material in the present work. The mechanism and feasibility of controlling the machining defects via LFVAD were theoretically and experimentally explored and the influence of vibration amplitude (VA) on the cutting responses was specially studied. The results show that LFVAD can reduce the average thrust forces and drilling temperatures compared to conventional drilling while the maximum thrust force shows larger magnitude with the elevation of VA, in which the VA of ∼30 μm presents the best one. Meanwhile, LFVAD can on the one hand reduce the scratch traces on the hole wall surface owing to its superior chip breakage effect and thereby improve the drilled hole accuracy, and on the other hand shrink the lower interface damage area due to the reduction of cutting temperatures. The obtained findings of the present work indicate that the proposed LFVAD method presents great superiority for the CFRP/Al co-cured material concerning the machining responses of higher hole accuracy and lower interface damage.

Multi‐objective optimization of ultrasonic vibration‐assisted drilling in carbon fiber reinforced polyetherketoneketone laminate

A New Strategy of Carbon Fiber Reinforced Plastic Drilling Evaluation Using Thermal Measurement

Modeling Evolution of Cutting Force in Ultrasonically Assisted Drilling of Carbon Fiber Reinforced Plastics

Hole quality in longitudinal–torsional coupled ultrasonic vibration assisted drilling of carbon fiber reinforced plastics

Investigation on carbon fiber-reinforced polymer combined with graphene nanoparticles subjected to drilling operation using response surface methodology and non-dominated sorting genetic algorithm-II

Influence of cutting tool design on ultrasonic-assisted drilling of fiber metal laminates

A study on the ultrasonic vibration on the cutting performance during ultrasonic-assisted drilling of CFRP with twist and dagger drill bits

Ultrasonic-Vibration-Assisted Waterjet Drilling of [0/45/−45/90]2s Carbon-Fiber-Reinforced Polymer Laminates

Dual-Method Characterization and Optimization of Drilling Parameters for Picosecond Laser Drilling Quality in CFRP

Optimizing Process Parameters in Drilling of CFRP Laminates: A Combined MOORA–TOPSIS–VIKOR Approach

Mechanical Drilling Force Model for Longitudinal Ultrasonic Vibration-assisted Drilling of Unidirectional CFRP

Investigating the material removal mechanism and cutting performance in ultrasonic vibration-assisted milling of carbon fibre reinforced thermoplastic

Study on exit damage characteristics of ultrasonic vibration assisted drilling of CFRP

Optimization of Drilling Parameters on Delamination and Burr Formation in Drilling of Neat CFRP and Hybrid CFRP Nano-Composites

Multiscale modelling and experimental analysis of ultrasonic-assisted drilling of GLARE fibre metal laminates

Machinability Of Drilling T700/Lt-03a Carbon Fiber Reinforced Plastic (Cfrp) Composite Laminates Using Candle Stick Drill And Multi-Facet Drill

Experimental Study on Longitudinal-Torsional Ultrasonic Vibration Drilling of Carbon Fiber–reinforced Plastics/titanium Alloy Stacks

Optimized selection of process parameters based on reasonable control of axial force and hole-exit temperature in drilling of CFRP

Experimental investigation on cavitation effect and surface quality of ultrasonic-assisted micro-hole drilling

Mechanism and feasibility study of low frequency vibration assisted drilling of a newly developed CFRP/Al co-cured material

Simulation and experimental research on longitudinal-torsional ultrasonic vibration drilling of CFRP/Ti laminates